staging: ti-soc-thermal:Introduce ti_bandgap_get_trend function for OMAP5

The patch adds ti_bandgap_get_trend function. This is specific
to OMAP5 for now it computes the trend from the temp values stored
in the hardware history buffer.

Formula: (T1 - T2) / P.

Where:
                T1: Last read valid temperature.
                T2: Last but one read valid temperature.
                P:  Update Interval.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index cc0c4ba..5b06b12 100644 (file)
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -962,6 +962,73 @@ static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
 }
 
 /**
+ * ti_bandgap_get_trend() - To fetch the temperature trend of a sensor
+ * @bgp: pointer to struct ti_bandgap
+ * @id: id of the individual sensor
+ * @trend: Pointer to trend.
+ *
+ * This function needs to be called to fetch the temperature trend of a
+ * Particular sensor. The function computes the difference in temperature
+ * w.r.t time. For the bandgaps with built in history buffer the temperatures
+ * are read from the buffer and for those without the Buffer -ENOTSUPP is
+ * returned.
+ *
+ * Return: 0 if no error, else return corresponding error. If no
+ *             error then the trend value is passed on to trend parameter
+ */
+int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend)
+{
+       struct temp_sensor_registers *tsr;
+       u32 temp1, temp2, reg1, reg2;
+       int t1, t2, interval, ret = 0;
+
+       ret = ti_bandgap_validate(bgp, id);
+       if (ret)
+               goto exit;
+
+       if (!TI_BANDGAP_HAS(bgp, HISTORY_BUFFER) ||
+           !TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
+               ret = -ENOTSUPP;
+               goto exit;
+       }
+
+       tsr = bgp->conf->sensors[id].registers;
+
+       /* Freeze and read the last 2 valid readings */
+       reg1 = tsr->ctrl_dtemp_1;
+       reg2 = tsr->ctrl_dtemp_2;
+
+       /* read temperature from history buffer */
+       temp1 = ti_bandgap_readl(bgp, reg1);
+       temp1 &= tsr->bgap_dtemp_mask;
+
+       temp2 = ti_bandgap_readl(bgp, reg2);
+       temp2 &= tsr->bgap_dtemp_mask;
+
+       /* Convert from adc values to mCelsius temperature */
+       ret = ti_bandgap_adc_to_mcelsius(bgp, temp1, &t1);
+       if (ret)
+               goto exit;
+
+       ret = ti_bandgap_adc_to_mcelsius(bgp, temp2, &t2);
+       if (ret)
+               goto exit;
+
+       /* Fetch the update interval */
+       ret = ti_bandgap_read_update_interval(bgp, id, &interval);
+       if (ret || !interval)
+               goto exit;
+
+       *trend = (t1 - t2) / interval;
+
+       dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n",
+               t1, t2, *trend);
+
+exit:
+       return ret;
+}
+
+/**
  * ti_bandgap_tshut_init() - setup and initialize tshut handling
  * @bgp: pointer to struct ti_bandgap
  * @pdev: pointer to device struct platform_device

diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
index e29e357..5f4794a 100644 (file)
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h
@@ -382,6 +382,7 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
                                  int *temperature);
 int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data);
 void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id);
+int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend);
 
 #ifdef CONFIG_OMAP4_THERMAL
 extern const struct ti_bandgap_data omap4430_data;