sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1

Change sfn4111t_reset() to change only GPIO output enables so that it
doesn't break subsequent I2C operations.

Update comments to explain exactly what we're doing.

Add a short sleep to make sure the FLASH_CFG_1 value is latched before
any subsequent I2C operations.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 16b80ac..c7c95db 100644 (file)
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -186,19 +186,22 @@ static int sfn4111t_reset(struct efx_nic *efx)
 {
        efx_oword_t reg;
 
-       /* GPIO pins are also used for I2C, so block that temporarily */
+       /* GPIO 3 and the GPIO register are shared with I2C, so block that */
        mutex_lock(&efx->i2c_adap.bus_lock);
 
+       /* Pull RST_N (GPIO 2) low then let it up again, setting the
+        * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
+        * output enables; the output levels should always be 0 (low)
+        * and we rely on external pull-ups. */
        falcon_read(efx, &reg, GPIO_CTL_REG_KER);
        EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true);
-       EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, false);
        falcon_write(efx, &reg, GPIO_CTL_REG_KER);
        msleep(1000);
-       EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, true);
-       EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, true);
-       EFX_SET_OWORD_FIELD(reg, GPIO3_OUT,
-                           !(efx->phy_mode & PHY_MODE_SPECIAL));
+       EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false);
+       EFX_SET_OWORD_FIELD(reg, GPIO3_OEN,
+                           !!(efx->phy_mode & PHY_MODE_SPECIAL));
        falcon_write(efx, &reg, GPIO_CTL_REG_KER);
+       msleep(1);
 
        mutex_unlock(&efx->i2c_adap.bus_lock);