[SCSI] bnx2i: Fixed the TCP graceful termination initiation

In compliance to RFC793, a TCP graceful termination will be used
instead of an abortive termination for the case where the remote
has initiated the close of the connection.
Additionally, a TCP abortive termination will be used to close the
connection when a logout response is not received in time after a
logout request has been initiated.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Acked-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 69febb6..00c0335 100644 (file)
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -639,6 +639,8 @@ enum {
        EP_STATE_CLEANUP_CMPL           = 0x800,
        EP_STATE_TCP_FIN_RCVD           = 0x1000,
        EP_STATE_TCP_RST_RCVD           = 0x2000,
+       EP_STATE_LOGOUT_SENT            = 0x4000,
+       EP_STATE_LOGOUT_RESP_RCVD       = 0x8000,
        EP_STATE_PG_OFLD_FAILED         = 0x1000000,
        EP_STATE_ULP_UPDATE_FAILED      = 0x2000000,
        EP_STATE_CLEANUP_FAILED         = 0x4000000,

diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 3a66ca2..d23fc25 100644 (file)
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -562,6 +562,8 @@ int bnx2i_send_iscsi_logout(struct bnx2i_conn *bnx2i_conn,
        logout_wqe->num_bds = 1;
        logout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
 
+       bnx2i_conn->ep->state = EP_STATE_LOGOUT_SENT;
+
        bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
        return 0;
 }
@@ -1482,6 +1484,8 @@ static int bnx2i_process_logout_resp(struct iscsi_session *session,
        resp_hdr->t2retain = cpu_to_be32(logout->time_to_retain);
 
        __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+
+       bnx2i_conn->ep->state = EP_STATE_LOGOUT_RESP_RCVD;
 done:
        spin_unlock(&session->lock);
        return 0;

diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index f6eebb3..c66c5a4 100644 (file)
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1890,6 +1890,8 @@ static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
        case EP_STATE_ULP_UPDATE_START:
        case EP_STATE_ULP_UPDATE_COMPL:
        case EP_STATE_TCP_FIN_RCVD:
+       case EP_STATE_LOGOUT_SENT:
+       case EP_STATE_LOGOUT_RESP_RCVD:
        case EP_STATE_ULP_UPDATE_FAILED:
                ret = 1;
                break;
@@ -1923,6 +1925,8 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
        struct iscsi_session *session = NULL;
        struct iscsi_conn *conn = NULL;
        int ret = 0;
+       int close = 0;
+       int close_ret = 0;
 
        if (!hba)
                return 0;
@@ -1939,33 +1943,44 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
                session = conn->session;
        }
 
-       bnx2i_ep->state = EP_STATE_DISCONN_START;
-
        init_timer(&bnx2i_ep->ofld_timer);
        bnx2i_ep->ofld_timer.expires = hba->conn_teardown_tmo + jiffies;
        bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
        bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
        add_timer(&bnx2i_ep->ofld_timer);
 
-       if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
-               int close = 0;
-               int close_ret = 0;
-
-               if (session) {
-                       spin_lock_bh(&session->lock);
-                       if (session->state == ISCSI_STATE_LOGGING_OUT)
-                               close = 1;
-                       spin_unlock_bh(&session->lock);
-               }
-               if (close)
-                       close_ret = cnic->cm_close(bnx2i_ep->cm_sk);
-               else
-                       close_ret = cnic->cm_abort(bnx2i_ep->cm_sk);
-               if (close_ret)
-                       bnx2i_ep->state = EP_STATE_DISCONN_COMPL;
-       } else
+       if (!test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
                goto out;
 
+       if (session) {
+               spin_lock_bh(&session->lock);
+               if (bnx2i_ep->state != EP_STATE_TCP_FIN_RCVD) {
+                       if (session->state == ISCSI_STATE_LOGGING_OUT) {
+                               if (bnx2i_ep->state == EP_STATE_LOGOUT_SENT) {
+                                       /* Logout sent, but no resp */
+                                       printk(KERN_ALERT "bnx2i - WARNING "
+                                               "logout response was not "
+                                               "received!\n");
+                               } else if (bnx2i_ep->state ==
+                                          EP_STATE_LOGOUT_RESP_RCVD)
+                                       close = 1;
+                       }
+               } else
+                       close = 1;
+
+               spin_unlock_bh(&session->lock);
+       }
+
+       bnx2i_ep->state = EP_STATE_DISCONN_START;
+
+       if (close)
+               close_ret = cnic->cm_close(bnx2i_ep->cm_sk);
+       else
+               close_ret = cnic->cm_abort(bnx2i_ep->cm_sk);
+
+       if (close_ret)
+               bnx2i_ep->state = EP_STATE_DISCONN_COMPL;
+
        /* wait for option-2 conn teardown */
        wait_event_interruptible(bnx2i_ep->ofld_wait,
                                 bnx2i_ep->state != EP_STATE_DISCONN_START);