arm64: dts: qcom: sa8540p-ride: enable pcie2a node

Add the pcie2a, pcie2a_phy, and respective tlmm nodes that are needed to
get pcie 2a controller enabled on Qdrive3.

This patch enables 4GB 64bit memory space for PCIE_2A to have BAR
allocations of 64bit pref mem needed on this Qdrive3 platform with dual
SoCs for root port and switch NT-EP. Hence this ranges property is
overridden in sa8540p-ride.dts only.

Moved tlmm node at the end as it tends to become rahter long.

Link: https://lore.kernel.org/lkml/Y49k1k8ayI9%2FrK+R@hovoldconsulting.com/
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213095922.11649-1-quic_shazhuss@quicinc.com

diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index 6c547f1..d708598 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -146,6 +146,27 @@
        };
 };
 
+&pcie2a {
+       ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>,
+                <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>,
+                <0x03000000 0x5 0x00000000 0x5 0x00000000 0x1 0x00000000>;
+
+       perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+       wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>;
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie2a_default>;
+
+       status = "okay";
+};
+
+&pcie2a_phy {
+       vdda-phy-supply = <&vreg_l11a>;
+       vdda-pll-supply = <&vreg_l3a>;
+
+       status = "okay";
+};
+
 &pcie3a {
        ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
                 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>,
@@ -186,31 +207,6 @@
        status = "okay";
 };
 
-&tlmm {
-       pcie3a_default: pcie3a-default-state {
-               perst-pins {
-                       pins = "gpio151";
-                       function = "gpio";
-                       drive-strength = <2>;
-                       bias-pull-down;
-               };
-
-               clkreq-pins {
-                       pins = "gpio150";
-                       function = "pcie3a_clkreq";
-                       drive-strength = <2>;
-                       bias-pull-up;
-               };
-
-               wake-pins {
-                       pins = "gpio56";
-                       function = "gpio";
-                       drive-strength = <2>;
-                       bias-pull-up;
-               };
-       };
-};
-
 &ufs_mem_hc {
        reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
 
@@ -268,3 +264,53 @@
 &xo_board_clk {
        clock-frequency = <38400000>;
 };
+
+/* PINCTRL */
+
+&tlmm {
+       pcie2a_default: pcie2a-default-state {
+               perst-pins {
+                       pins = "gpio143";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-down;
+               };
+
+               clkreq-pins {
+                       pins = "gpio142";
+                       function = "pcie2a_clkreq";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+
+               wake-pins {
+                       pins = "gpio145";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+       };
+
+       pcie3a_default: pcie3a-default-state {
+               perst-pins {
+                       pins = "gpio151";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-down;
+               };
+
+               clkreq-pins {
+                       pins = "gpio150";
+                       function = "pcie3a_clkreq";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+
+               wake-pins {
+                       pins = "gpio56";
+                       function = "gpio";
+                       drive-strength = <2>;
+                       bias-pull-up;
+               };
+       };
+};