Staging: bcm: Properly format comments as needed in target_params.h

This patch formats all comments, and removes
them as needed in target_params.h.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/bcm/target_params.h b/drivers/staging/bcm/target_params.h
index cff6a12..548bfd6 100644 (file)
--- a/drivers/staging/bcm/target_params.h
+++ b/drivers/staging/bcm/target_params.h
@@ -4,34 +4,31 @@
 typedef struct _TARGET_PARAMS
 {
        B_UINT32 m_u32CfgVersion;
-       // Scanning Related Params
        B_UINT32 m_u32CenterFrequency;
        B_UINT32 m_u32BandAScan;
        B_UINT32 m_u32BandBScan;
        B_UINT32 m_u32BandCScan;
-       // QoS Params
        B_UINT32 m_u32ErtpsOptions;
        B_UINT32 m_u32PHSEnable;
-       // HO Params
        B_UINT32 m_u32HoEnable;
        B_UINT32 m_u32HoReserved1;
        B_UINT32 m_u32HoReserved2;
-       // Power Control Params
        B_UINT32 m_u32MimoEnable;
        B_UINT32 m_u32SecurityEnable;
-       B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
+       B_UINT32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
        /* PowerSaving Mode Options:
-          bit 0 = 1: CPE mode - to keep pcmcia if alive;
-          bit 1 = 1: CINR reporting in Idlemode Msg
-          bit 2 = 1: Default PSC Enable in sleepmode*/
+        * bit 0 = 1: CPE mode - to keep pcmcia if alive;
+        * bit 1 = 1: CINR reporting in Idlemode Msg
+        * bit 2 = 1: Default PSC Enable in sleepmode
+        */
        B_UINT32 m_u32PowerSavingModeOptions;
        B_UINT32 m_u32ArqEnable;
-       // From Version #3, the HARQ section renamed as general
+       /* From Version #3, the HARQ section renamed as general */
        B_UINT32 m_u32HarqEnable;
-       // EEPROM Param Location
        B_UINT32  m_u32EEPROMFlag;
-       // BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
-       // Unused - LSByte
+       /* BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
+        * Unused - LSByte
+        */
        B_UINT32 m_u32Customize;
        B_UINT32 m_u32ConfigBW;  /* In Hz */
        B_UINT32 m_u32ShutDownInitThresholdTimer;
@@ -39,11 +36,10 @@ typedef struct _TARGET_PARAMS
        B_UINT32 m_u32PhyParameter1;
        B_UINT32 m_u32PhyParameter2;
        B_UINT32 m_u32PhyParameter3;
-       B_UINT32 m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
+       B_UINT32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
        B_UINT32 m_u32MaxMACDataperDLFrame;
        B_UINT32 m_u32MaxMACDataperULFrame;
        B_UINT32 m_u32Corr2MacFlags;
-       //adding driver params.
        B_UINT32 HostDrvrConfig1;
        B_UINT32 HostDrvrConfig2;
        B_UINT32 HostDrvrConfig3;
@@ -51,10 +47,11 @@ typedef struct _TARGET_PARAMS
        B_UINT32 HostDrvrConfig5;
        B_UINT32 HostDrvrConfig6;
        B_UINT32 m_u32SegmentedPUSCenable;
-       // removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
-       //BAMC Related Parameters
-       //Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 \96 Enable Band AMC signaling.
-       //bit 16-31 Band AMC Data configuration: Bit 16 = 1 \96 Band AMC 2x3 support.
+       /* removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
+        * BAMC Related Parameters
+        * Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 \96 Enable Band AMC signaling.
+        * bit 16-31 Band AMC Data configuration: Bit 16 = 1 \96 Band AMC 2x3 support.
+        */
        B_UINT32 m_u32BandAMCEnable;
 } stTargetParams, TARGET_PARAMS, *PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;