} CONTROLVM_MESSAGE_DEVICE_CONFIGURE; /* total 56 bytes */
/* This is the format for a message in any ControlVm queue. */
-typedef struct _CONTROLVM_MESSAGE_PACKET {
+struct controlvm_message_packet {
union {
-
- /* BEGIN Request messages */
struct {
- u32 busNo; /*< bus # (0..n-1) from the msg
- * receiver's perspective */
-
- /* Control uses header SegmentIndex field to access bus number... */
- u32 deviceCount; /*< indicates the max number of
- * devices on this bus */
- u64 channelAddr; /*< Guest physical address of the
- * channel, which can be
- * dereferenced by the receiver
- * of this ControlVm command */
- u64 channelBytes; /*< size of the channel in bytes */
- uuid_le busDataTypeGuid;/*< indicates format of data in
- bus channel */
- uuid_le busInstGuid; /*< instance guid for the bus */
- } createBus; /* for CONTROLVM_BUS_CREATE */
+ u32 bus_no; /* bus # (0..n-1) from the msg
+ * receiver's perspective */
+ u32 dev_count; /* indicates the max number of
+ * devices on this bus */
+ u64 channel_addr; /* Guest physical address of
+ * the channel, which can be
+ * dereferenced by the receiver
+ * of this ControlVm command */
+ u64 channel_bytes; /* size of the channel */
+ uuid_le bus_data_type_uuid; /* indicates format of
+ * data in bus channel*/
+ uuid_le bus_inst_uuid; /* instance uuid for the bus */
+ } create_bus; /* for CONTROLVM_BUS_CREATE */
struct {
- u32 busNo; /*< bus # (0..n-1) from the msg
- * receiver's perspective */
-
- /* Control uses header SegmentIndex field to access bus number... */
+ u32 bus_no; /* bus # (0..n-1) from the msg
+ * receiver's perspective */
u32 reserved; /* Natural alignment purposes */
- } destroyBus; /* for CONTROLVM_BUS_DESTROY */
+ } destroy_bus; /* for CONTROLVM_BUS_DESTROY */
struct {
- u32 busNo; /*< bus # (0..n-1) from the
- * msg receiver's
- * perspective */
-
- /* Control uses header SegmentIndex field to access bus number... */
- u32 reserved1; /* for alignment purposes */
- u64 guestHandle; /* This is used to convert
- * guest physical address to real
- * physical address for DMA, for ex. */
- u64 recvBusInterruptHandle;/*< specifies interrupt
- * info. It is used by SP to register
- * to receive interrupts from the CP.
- * This interrupt is used for bus
- * level notifications. The
- * corresponding
- * sendBusInterruptHandle is kept in
- * CP. */
- } configureBus; /* for CONTROLVM_BUS_CONFIGURE */
-
+ u32 bus_no; /* bus # (0..n-1) from the receiver's
+ * perspective */
+ u32 reserved1; /* for alignment purposes */
+ u64 guest_handle; /* This is used to convert
+ * guest physical address to
+ * physical address */
+ u64 recv_bus_irq_handle;
+ /* specifies interrupt info. It is used by SP
+ * to register to receive interrupts from the
+ * CP. This interrupt is used for bus level
+ * notifications. The corresponding
+ * sendBusInterruptHandle is kept in CP. */
+ } configure_bus; /* for CONTROLVM_BUS_CONFIGURE */
/* for CONTROLVM_DEVICE_CREATE */
- CONTROLVM_PACKET_DEVICE_CREATE createDevice;
+ CONTROLVM_PACKET_DEVICE_CREATE create_device;
struct {
- u32 busNo; /*< bus # (0..n-1) from the msg
- * receiver's perspective */
-
- /* Control uses header SegmentIndex field to access bus number... */
- u32 devNo; /*< bus-relative (0..n-1) device
- * number */
- } destroyDevice; /* for CONTROLVM_DEVICE_DESTROY */
-
+ u32 bus_no; /* bus # (0..n-1) from the msg
+ * receiver's perspective */
+ u32 dev_no; /* bus-relative (0..n-1) device # */
+ } destroy_device; /* for CONTROLVM_DEVICE_DESTROY */
/* for CONTROLVM_DEVICE_CONFIGURE */
- CONTROLVM_PACKET_DEVICE_CONFIGURE configureDevice;
+ CONTROLVM_PACKET_DEVICE_CONFIGURE configure_device;
struct {
- u32 busNo; /*< bus # (0..n-1) from the msg
- * receiver's perspective */
-
- /* Control uses header SegmentIndex field to access bus number... */
- u32 devNo; /*< bus-relative (0..n-1) device
- * number */
- } reconfigureDevice; /* for CONTROLVM_DEVICE_RECONFIGURE */
+ u32 bus_no; /* bus # (0..n-1) from the msg
+ * receiver's perspective */
+ u32 dev_no; /* bus-relative (0..n-1) device # */
+ } reconfigure_device; /* for CONTROLVM_DEVICE_RECONFIGURE */
struct {
- u32 busNo;
+ u32 bus_no;
struct spar_segment_state state;
u8 reserved[2]; /* Natural alignment purposes */
- } busChangeState; /* for CONTROLVM_BUS_CHANGESTATE */
+ } bus_change_state; /* for CONTROLVM_BUS_CHANGESTATE */
struct {
- u32 busNo;
- u32 devNo;
+ u32 bus_no;
+ u32 dev_no;
struct spar_segment_state state;
struct {
- u32 physicalDevice:1; /* =1 if message is for
+ u32 phys_device:1; /* =1 if message is for
* a physical device */
- /* remaining bits in this 32-bit word are available */
} flags;
u8 reserved[2]; /* Natural alignment purposes */
- } deviceChangeState; /* for CONTROLVM_DEVICE_CHANGESTATE */
+ } device_change_state; /* for CONTROLVM_DEVICE_CHANGESTATE */
struct {
- u32 busNo;
- u32 devNo;
+ u32 bus_no;
+ u32 dev_no;
struct spar_segment_state state;
u8 reserved[6]; /* Natural alignment purposes */
- } deviceChangeStateEvent; /* for CONTROLVM_DEVICE_CHANGESTATE_EVENT */
+ } device_change_state_event;
+ /* for CONTROLVM_DEVICE_CHANGESTATE_EVENT */
struct {
- u32 busCount; /*< indicates the max number of busses */
- u32 switchCount; /*< indicates the max number of
- * switches (applicable for service
- * partition only) */
+ u32 bus_count; /* indicates the max number of busses */
+ u32 switch_count; /* indicates the max number of
+ * switches if a service partition */
enum ultra_chipset_feature features;
- u32 platformNumber; /* Platform Number */
- } initChipset; /* for CONTROLVM_CHIPSET_INIT */
+ u32 platform_number; /* Platform Number */
+ } init_chipset; /* for CONTROLVM_CHIPSET_INIT */
struct {
- u32 Options; /*< reserved */
- u32 Test; /*< bit 0 set to run embedded selftest */
- } chipsetSelftest; /* for CONTROLVM_CHIPSET_SELFTEST */
-
- /* END Request messages */
-
- /* BEGIN Response messages */
-
- /* END Response messages */
-
- /* BEGIN Event messages */
-
- /* END Event messages */
-
- /* BEGIN Ack messages */
-
- /* END Ack messages */
- u64 addr; /*< a physical address of something, that
- * can be dereferenced by the receiver of
- * this ControlVm command (depends on
- * command id) */
- u64 handle; /*< a handle of something (depends on
- * command id) */
+ u32 options; /* reserved */
+ u32 test; /* bit 0 set to run embedded selftest */
+ } chipset_selftest; /* for CONTROLVM_CHIPSET_SELFTEST */
+ u64 addr; /* a physical address of something, that can be
+ * dereferenced by the receiver of this
+ * ControlVm command (depends on command id) */
+ u64 handle; /* a handle of something (depends on command
+ * id) */
};
-} CONTROLVM_MESSAGE_PACKET;
+};
/* All messages in any ControlVm queue have this layout. */
typedef struct _CONTROLVM_MESSAGE {
CONTROLVM_MESSAGE_HEADER hdr;
- CONTROLVM_MESSAGE_PACKET cmd;
+ struct controlvm_message_packet cmd;
} CONTROLVM_MESSAGE;
typedef struct _DEVICE_MAP {
#endif
int uislib_get_owned_pdest(struct uisscsi_dest *pdest);
-int uislib_send_event(enum controlvm_id id, CONTROLVM_MESSAGE_PACKET *event);
+int uislib_send_event(enum controlvm_id id,
+ struct controlvm_message_packet *event);
/* structure used by vhba & vnic to keep track of queue & thread info */
struct chaninfo {
return CONTROLVM_RESP_ERROR_MAX_BUSES;
}
- busNo = msg->cmd.createBus.busNo;
- deviceCount = msg->cmd.createBus.deviceCount;
+ busNo = msg->cmd.create_bus.bus_no;
+ deviceCount = msg->cmd.create_bus.dev_count;
POSTCODE_LINUX_4(BUS_CREATE_ENTRY_PC, busNo, deviceCount,
POSTCODE_SEVERITY_INFO);
bus->device_count = deviceCount;
bus->device =
(struct device_info **) ((char *) bus + sizeof(struct bus_info));
- bus->bus_inst_uuid = msg->cmd.createBus.busInstGuid;
+ bus->bus_inst_uuid = msg->cmd.create_bus.bus_inst_uuid;
bus->bus_channel_bytes = 0;
bus->bus_channel = NULL;
kfree(bus);
return CONTROLVM_RESP_ERROR_ALREADY_DONE;
}
- if ((msg->cmd.createBus.channelAddr != 0)
- && (msg->cmd.createBus.channelBytes != 0)) {
- bus->bus_channel_bytes = msg->cmd.createBus.channelBytes;
+ if ((msg->cmd.create_bus.channel_addr != 0)
+ && (msg->cmd.create_bus.channel_bytes != 0)) {
+ bus->bus_channel_bytes = msg->cmd.create_bus.channel_bytes;
bus->bus_channel =
- init_vbus_channel(msg->cmd.createBus.channelAddr,
- msg->cmd.createBus.channelBytes);
+ init_vbus_channel(msg->cmd.create_bus.channel_addr,
+ msg->cmd.create_bus.channel_bytes);
}
/* the msg is bound for virtpci; send guest_msgs struct to callback */
if (!msg->hdr.Flags.server) {
cmd.add_vbus.bus_no = busNo;
cmd.add_vbus.chanptr = bus->bus_channel;
cmd.add_vbus.dev_count = deviceCount;
- cmd.add_vbus.bus_uuid = msg->cmd.createBus.busDataTypeGuid;
- cmd.add_vbus.instance_uuid = msg->cmd.createBus.busInstGuid;
+ cmd.add_vbus.bus_uuid = msg->cmd.create_bus.bus_data_type_uuid;
+ cmd.add_vbus.instance_uuid = msg->cmd.create_bus.bus_inst_uuid;
if (!virt_control_chan_func) {
LOGERR("CONTROLVM_BUS_CREATE Failed: virtpci callback not registered.");
POSTCODE_LINUX_3(BUS_CREATE_FAILURE_PC, bus->bus_no,
struct guest_msgs cmd;
u32 busNo;
- busNo = msg->cmd.destroyBus.busNo;
+ busNo = msg->cmd.destroy_bus.bus_no;
read_lock(&BusListLock);
u64 minSize = MIN_IO_CHANNEL_SIZE;
struct req_handler_info *pReqHandler;
- busNo = msg->cmd.createDevice.busNo;
- devNo = msg->cmd.createDevice.devNo;
+ busNo = msg->cmd.create_device.busNo;
+ devNo = msg->cmd.create_device.devNo;
POSTCODE_LINUX_4(DEVICE_CREATE_ENTRY_PC, devNo, busNo,
POSTCODE_SEVERITY_INFO);
return CONTROLVM_RESP_ERROR_KMALLOC_FAILED;
}
- dev->channel_uuid = msg->cmd.createDevice.dataTypeGuid;
- dev->intr = msg->cmd.createDevice.intr;
- dev->channel_addr = msg->cmd.createDevice.channelAddr;
+ dev->channel_uuid = msg->cmd.create_device.dataTypeGuid;
+ dev->intr = msg->cmd.create_device.intr;
+ dev->channel_addr = msg->cmd.create_device.channelAddr;
dev->bus_no = busNo;
dev->dev_no = devNo;
sema_init(&dev->interrupt_callback_lock, 1); /* unlocked */
* channel
*/
minSize = pReqHandler->min_channel_bytes;
- if (minSize > msg->cmd.createDevice.channelBytes) {
+ if (minSize > msg->cmd.create_device.channelBytes) {
LOGERR("CONTROLVM_DEVICE_CREATE Failed: channel size is too small, channel size:0x%lx, required size:0x%lx",
- (ulong) msg->cmd.createDevice.channelBytes,
+ (ulong) msg->cmd.create_device.channelBytes,
(ulong) minSize);
POSTCODE_LINUX_4(DEVICE_CREATE_FAILURE_PC, devNo, busNo,
POSTCODE_SEVERITY_ERR);
}
dev->chanptr =
uislib_ioremap_cache(dev->channel_addr,
- msg->cmd.createDevice.channelBytes);
+ msg->cmd.create_device.channelBytes);
if (!dev->chanptr) {
LOGERR("CONTROLVM_DEVICE_CREATE Failed: ioremap_cache of channelAddr:%Lx for channelBytes:%llu failed",
dev->channel_addr,
- msg->cmd.createDevice.channelBytes);
+ msg->cmd.create_device.channelBytes);
result = CONTROLVM_RESP_ERROR_IOREMAP_FAILED;
POSTCODE_LINUX_4(DEVICE_CREATE_FAILURE_PC, devNo, busNo,
POSTCODE_SEVERITY_ERR);
goto Away;
}
}
- dev->instance_uuid = msg->cmd.createDevice.devInstGuid;
- dev->channel_bytes = msg->cmd.createDevice.channelBytes;
+ dev->instance_uuid = msg->cmd.create_device.devInstGuid;
+ dev->channel_bytes = msg->cmd.create_device.channelBytes;
read_lock(&BusListLock);
for (bus = BusListHead; bus; bus = bus->next) {
struct guest_msgs cmd;
int retval = CONTROLVM_RESP_SUCCESS;
- busNo = msg->cmd.deviceChangeState.busNo;
- devNo = msg->cmd.deviceChangeState.devNo;
+ busNo = msg->cmd.device_change_state.bus_no;
+ devNo = msg->cmd.device_change_state.dev_no;
read_lock(&BusListLock);
for (bus = BusListHead; bus; bus = bus->next) {
struct guest_msgs cmd;
int retval = CONTROLVM_RESP_SUCCESS;
- busNo = msg->cmd.deviceChangeState.busNo;
- devNo = msg->cmd.deviceChangeState.devNo;
+ busNo = msg->cmd.device_change_state.bus_no;
+ devNo = msg->cmd.device_change_state.dev_no;
read_lock(&BusListLock);
for (bus = BusListHead; bus; bus = bus->next) {
struct guest_msgs cmd;
int retval = CONTROLVM_RESP_SUCCESS;
- busNo = msg->cmd.destroyDevice.busNo;
- devNo = msg->cmd.destroyDevice.devNo;
+ busNo = msg->cmd.destroy_device.bus_no;
+ devNo = msg->cmd.destroy_device.bus_no;
read_lock(&BusListLock);
LOGINF("destroy_device called for busNo=%u, devNo=%u", busNo, devNo);
{
POSTCODE_LINUX_2(CHIPSET_INIT_ENTRY_PC, POSTCODE_SEVERITY_INFO);
- MaxBusCount = msg->cmd.initChipset.busCount;
- PlatformNumber = msg->cmd.initChipset.platformNumber;
+ MaxBusCount = msg->cmd.init_chipset.bus_count;
+ PlatformNumber = msg->cmd.init_chipset.platform_number;
PhysicalDataChan = 0;
/* We need to make sure we have our functions registered
CONTROLVM_MESSAGE msg;
init_msg_header(&msg, CONTROLVM_BUS_DESTROY, 0, 0);
- msg.cmd.destroyBus.busNo = busNo;
+ msg.cmd.destroy_bus.bus_no = busNo;
if (destroy_bus(&msg, NULL) != CONTROLVM_RESP_SUCCESS) {
LOGERR("destroy_bus failed. busNo=0x%x\n", busNo);
return 0;
CONTROLVM_MESSAGE msg;
init_msg_header(&msg, CONTROLVM_DEVICE_DESTROY, 0, 0);
- msg.cmd.destroyDevice.busNo = busNo;
- msg.cmd.destroyDevice.devNo = devNo;
+ msg.cmd.destroy_device.bus_no = busNo;
+ msg.cmd.destroy_device.dev_no = devNo;
if (destroy_device(&msg, NULL) != CONTROLVM_RESP_SUCCESS) {
LOGERR("destroy_device failed. busNo=0x%x devNo=0x%x\n", busNo,
devNo);
* after number 4, then the add_vnic will fail, and the
* ultraboot will fail.
*/
- msg.cmd.initChipset.busCount = 23;
- msg.cmd.initChipset.switchCount = 0;
+ msg.cmd.init_chipset.bus_count = 23;
+ msg.cmd.init_chipset.switch_count = 0;
if (init_chipset(&msg, NULL) != CONTROLVM_RESP_SUCCESS) {
LOGERR("init_chipset failed.\n");
return 0;
POSTCODE_LINUX_3(BUS_CREATE_ENTRY_PC, bus_no,
POSTCODE_SEVERITY_WARNING);
init_msg_header(&msg, CONTROLVM_BUS_CREATE, 0, 0);
- msg.cmd.createBus.busNo = bus_no;
- msg.cmd.createBus.deviceCount = 23; /* devNo+1; */
- msg.cmd.createBus.channelAddr = channel_addr;
- msg.cmd.createBus.channelBytes = n_channel_bytes;
+ msg.cmd.create_bus.bus_no = bus_no;
+ msg.cmd.create_bus.dev_count = 23; /* devNo+1; */
+ msg.cmd.create_bus.channel_addr = channel_addr;
+ msg.cmd.create_bus.channel_bytes = n_channel_bytes;
if (create_bus(&msg, NULL) != CONTROLVM_RESP_SUCCESS) {
LOGERR("create_bus failed.\n");
POSTCODE_LINUX_3(BUS_CREATE_FAILURE_PC, bus_no,
int rc;
init_msg_header(&msg, CONTROLVM_DEVICE_CHANGESTATE, 0, 0);
- msg.cmd.deviceChangeState.busNo = bus_no;
- msg.cmd.deviceChangeState.devNo = dev_no;
- msg.cmd.deviceChangeState.state = segment_state_standby;
+ msg.cmd.device_change_state.bus_no = bus_no;
+ msg.cmd.device_change_state.dev_no = dev_no;
+ msg.cmd.device_change_state.state = segment_state_standby;
rc = pause_device(&msg);
if (rc != CONTROLVM_RESP_SUCCESS) {
LOGERR("VHBA pause_device failed. busNo=0x%x devNo=0x%x\n",
int rc;
init_msg_header(&msg, CONTROLVM_DEVICE_CHANGESTATE, 0, 0);
- msg.cmd.deviceChangeState.busNo = bus_no;
- msg.cmd.deviceChangeState.devNo = dev_no;
- msg.cmd.deviceChangeState.state = segment_state_running;
+ msg.cmd.device_change_state.bus_no = bus_no;
+ msg.cmd.device_change_state.dev_no = dev_no;
+ msg.cmd.device_change_state.state = segment_state_running;
rc = resume_device(&msg);
if (rc != CONTROLVM_RESP_SUCCESS) {
LOGERR("VHBA resume_device failed. busNo=0x%x devNo=0x%x\n",
* need to be ioremap()ed
*/
msg.hdr.Flags.testMessage = 1;
- msg.cmd.createDevice.busNo = bus_no;
- msg.cmd.createDevice.devNo = dev_no;
- msg.cmd.createDevice.devInstGuid = inst_uuid;
+ msg.cmd.create_device.busNo = bus_no;
+ msg.cmd.create_device.devNo = dev_no;
+ msg.cmd.create_device.devInstGuid = inst_uuid;
if (intr)
- msg.cmd.createDevice.intr = *intr;
+ msg.cmd.create_device.intr = *intr;
else
- memset(&msg.cmd.createDevice.intr, 0,
+ memset(&msg.cmd.create_device.intr, 0,
sizeof(struct irq_info));
- msg.cmd.createDevice.channelAddr = phys_chan_addr;
+ msg.cmd.create_device.channelAddr = phys_chan_addr;
if (chan_bytes < MIN_IO_CHANNEL_SIZE) {
LOGERR("wrong channel size.chan_bytes = 0x%x IO_CHANNEL_SIZE= 0x%x\n",
chan_bytes, (unsigned int) MIN_IO_CHANNEL_SIZE);
MIN_IO_CHANNEL_SIZE, POSTCODE_SEVERITY_ERR);
return 0;
}
- msg.cmd.createDevice.channelBytes = chan_bytes;
- msg.cmd.createDevice.dataTypeGuid = spar_vhba_channel_protocol_uuid;
+ msg.cmd.create_device.channelBytes = chan_bytes;
+ msg.cmd.create_device.dataTypeGuid = spar_vhba_channel_protocol_uuid;
if (create_device(&msg, NULL) != CONTROLVM_RESP_SUCCESS) {
LOGERR("VHBA create_device failed.\n");
POSTCODE_LINUX_4(VHBA_CREATE_FAILURE_PC, dev_no, bus_no,
* need to be ioremap()ed
*/
msg.hdr.Flags.testMessage = 1;
- msg.cmd.createDevice.busNo = bus_no;
- msg.cmd.createDevice.devNo = dev_no;
- msg.cmd.createDevice.devInstGuid = inst_uuid;
+ msg.cmd.create_device.busNo = bus_no;
+ msg.cmd.create_device.devNo = dev_no;
+ msg.cmd.create_device.devInstGuid = inst_uuid;
if (intr)
- msg.cmd.createDevice.intr = *intr;
+ msg.cmd.create_device.intr = *intr;
else
- memset(&msg.cmd.createDevice.intr, 0,
+ memset(&msg.cmd.create_device.intr, 0,
sizeof(struct irq_info));
- msg.cmd.createDevice.channelAddr = phys_chan_addr;
+ msg.cmd.create_device.channelAddr = phys_chan_addr;
if (chan_bytes < MIN_IO_CHANNEL_SIZE) {
LOGERR("wrong channel size.chan_bytes = 0x%x IO_CHANNEL_SIZE= 0x%x\n",
chan_bytes, (unsigned int) MIN_IO_CHANNEL_SIZE);
MIN_IO_CHANNEL_SIZE, POSTCODE_SEVERITY_ERR);
return 0;
}
- msg.cmd.createDevice.channelBytes = chan_bytes;
- msg.cmd.createDevice.dataTypeGuid = spar_vnic_channel_protocol_uuid;
+ msg.cmd.create_device.channelBytes = chan_bytes;
+ msg.cmd.create_device.dataTypeGuid = spar_vnic_channel_protocol_uuid;
if (create_device(&msg, NULL) != CONTROLVM_RESP_SUCCESS) {
LOGERR("VNIC create_device failed.\n");
POSTCODE_LINUX_4(VNIC_CREATE_FAILURE_PC, dev_no, bus_no,
int rc;
init_msg_header(&msg, CONTROLVM_DEVICE_CHANGESTATE, 0, 0);
- msg.cmd.deviceChangeState.busNo = bus_no;
- msg.cmd.deviceChangeState.devNo = dev_no;
- msg.cmd.deviceChangeState.state = segment_state_standby;
+ msg.cmd.device_change_state.bus_no = bus_no;
+ msg.cmd.device_change_state.dev_no = dev_no;
+ msg.cmd.device_change_state.state = segment_state_standby;
rc = pause_device(&msg);
if (rc != CONTROLVM_RESP_SUCCESS) {
LOGERR("VNIC pause_device failed. busNo=0x%x devNo=0x%x\n",
int rc;
init_msg_header(&msg, CONTROLVM_DEVICE_CHANGESTATE, 0, 0);
- msg.cmd.deviceChangeState.busNo = bus_no;
- msg.cmd.deviceChangeState.devNo = dev_no;
- msg.cmd.deviceChangeState.state = segment_state_running;
+ msg.cmd.device_change_state.bus_no = bus_no;
+ msg.cmd.device_change_state.dev_no = dev_no;
+ msg.cmd.device_change_state.state = segment_state_running;
rc = resume_device(&msg);
if (rc != CONTROLVM_RESP_SUCCESS) {
LOGERR("VNIC resume_device failed. busNo=0x%x devNo=0x%x\n",
init_msg_header(&msg, CONTROLVM_BUS_CREATE, 0, 0);
msg.hdr.Flags.testMessage = 1;
- msg.cmd.createBus.busNo = busNo;
- msg.cmd.createBus.deviceCount = 4;
- msg.cmd.createBus.channelAddr = 0;
- msg.cmd.createBus.channelBytes = 0;
+ msg.cmd.create_bus.bus_no = busNo;
+ msg.cmd.create_bus.dev_count = 4;
+ msg.cmd.create_bus.channel_addr = 0;
+ msg.cmd.create_bus.channel_bytes = 0;
if (create_bus(&msg, NULL) != CONTROLVM_RESP_SUCCESS) {
LOGERR("client create_bus failed");
return 0;
init_msg_header(&msg, CONTROLVM_DEVICE_CREATE, 0, 0);
msg.hdr.Flags.testMessage = 1;
- msg.cmd.createDevice.busNo = busNo;
- msg.cmd.createDevice.devNo = devNo;
- msg.cmd.createDevice.devInstGuid = NULL_UUID_LE;
- memset(&msg.cmd.createDevice.intr, 0, sizeof(struct irq_info));
- msg.cmd.createDevice.channelAddr = PhysicalDataChan;
- msg.cmd.createDevice.channelBytes = MIN_IO_CHANNEL_SIZE;
- msg.cmd.createDevice.dataTypeGuid = spar_vnic_channel_protocol_uuid;
+ msg.cmd.create_device.busNo = busNo;
+ msg.cmd.create_device.devNo = devNo;
+ msg.cmd.create_device.devInstGuid = NULL_UUID_LE;
+ memset(&msg.cmd.create_device.intr, 0, sizeof(struct irq_info));
+ msg.cmd.create_device.channelAddr = PhysicalDataChan;
+ msg.cmd.create_device.channelBytes = MIN_IO_CHANNEL_SIZE;
+ msg.cmd.create_device.dataTypeGuid = spar_vnic_channel_protocol_uuid;
if (create_device(&msg, NULL) != CONTROLVM_RESP_SUCCESS) {
LOGERR("client create_device failed");
goto AwayCleanup;
if (busCreated) {
init_msg_header(&msg, CONTROLVM_BUS_DESTROY, 0, 0);
msg.hdr.Flags.testMessage = 1;
- msg.cmd.destroyBus.busNo = busNo;
+ msg.cmd.destroy_bus.bus_no = busNo;
if (destroy_bus(&msg, NULL) != CONTROLVM_RESP_SUCCESS)
LOGERR("client destroy_bus failed.\n");
}
init_msg_header(&msg, CONTROLVM_DEVICE_DESTROY, 0, 0);
msg.hdr.Flags.testMessage = 1;
- msg.cmd.destroyDevice.busNo = busNo;
- msg.cmd.destroyDevice.devNo = devNo;
+ msg.cmd.destroy_device.bus_no = busNo;
+ msg.cmd.destroy_device.dev_no = devNo;
if (destroy_device(&msg, NULL) != CONTROLVM_RESP_SUCCESS) {
/* Don't error exit - try to see if bus can be destroyed... */
LOGERR("client destroy_device failed.\n");
init_msg_header(&msg, CONTROLVM_BUS_DESTROY, 0, 0);
msg.hdr.Flags.testMessage = 1;
- msg.cmd.destroyBus.busNo = busNo;
+ msg.cmd.destroy_bus.bus_no = busNo;
if (destroy_bus(&msg, NULL) != CONTROLVM_RESP_SUCCESS)
LOGERR("client destroy_bus failed.\n");
/* 0xffffff is an invalid Bus/Device number */
static ulong g_diagpoolBusNo = 0xffffff;
static ulong g_diagpoolDevNo = 0xffffff;
-static CONTROLVM_MESSAGE_PACKET g_DeviceChangeStatePacket;
+static struct controlvm_message_packet g_DeviceChangeStatePacket;
/* Only VNIC and VHBA channels are sent to visorclientbus (aka
* "visorhackbus")
/* Set features to indicate we support parahotplug (if Command
* also supports it). */
features =
- inmsg->cmd.initChipset.
+ inmsg->cmd.init_chipset.
features & ULTRA_CHIPSET_FEATURE_PARA_HOTPLUG;
/* Set the "reply" bit so Command knows this is a
/* For DiagPool channel DEVICE_CHANGESTATE, we need to send
* back the deviceChangeState structure in the packet. */
if (msgHdr->Id == CONTROLVM_DEVICE_CHANGESTATE
- && g_DeviceChangeStatePacket.deviceChangeState.busNo ==
+ && g_DeviceChangeStatePacket.device_change_state.bus_no ==
g_diagpoolBusNo
- && g_DeviceChangeStatePacket.deviceChangeState.devNo ==
+ && g_DeviceChangeStatePacket.device_change_state.dev_no ==
g_diagpoolDevNo)
outmsg.cmd = g_DeviceChangeStatePacket;
if (outmsg.hdr.Flags.testMessage == 1) {
CONTROLVM_MESSAGE outmsg;
controlvm_init_response(&outmsg, msgHdr, response);
- outmsg.cmd.initChipset.features = features;
+ outmsg.cmd.init_chipset.features = features;
if (!visorchannel_signalinsert(ControlVm_channel,
CONTROLVM_QUEUE_REQUEST, &outmsg)) {
LOGERR("signalinsert failed!");
CONTROLVM_MESSAGE outmsg;
controlvm_init_response(&outmsg, msgHdr, response);
- outmsg.cmd.deviceChangeState.state = state;
- outmsg.cmd.deviceChangeState.flags.physicalDevice = 1;
+ outmsg.cmd.device_change_state.state = state;
+ outmsg.cmd.device_change_state.flags.phys_device = 1;
if (!visorchannel_signalinsert(ControlVm_channel,
CONTROLVM_QUEUE_REQUEST, &outmsg)) {
LOGERR("signalinsert failed!");
controlvm_init_response(&outmsg, &p->pendingMsgHdr, response);
- outmsg.cmd.deviceChangeState.busNo = busNo;
- outmsg.cmd.deviceChangeState.devNo = devNo;
- outmsg.cmd.deviceChangeState.state = responseState;
+ outmsg.cmd.device_change_state.bus_no = busNo;
+ outmsg.cmd.device_change_state.dev_no = devNo;
+ outmsg.cmd.device_change_state.state = responseState;
if (!visorchannel_signalinsert(ControlVm_channel,
CONTROLVM_QUEUE_REQUEST, &outmsg)) {
static void
bus_create(CONTROLVM_MESSAGE *inmsg)
{
- CONTROLVM_MESSAGE_PACKET *cmd = &inmsg->cmd;
- ulong busNo = cmd->createBus.busNo;
+ struct controlvm_message_packet *cmd = &inmsg->cmd;
+ ulong busNo = cmd->create_bus.bus_no;
int rc = CONTROLVM_RESP_SUCCESS;
VISORCHIPSET_BUS_INFO *pBusInfo = NULL;
INIT_LIST_HEAD(&pBusInfo->entry);
pBusInfo->busNo = busNo;
- pBusInfo->devNo = cmd->createBus.deviceCount;
+ pBusInfo->devNo = cmd->create_bus.dev_count;
POSTCODE_LINUX_3(BUS_CREATE_ENTRY_PC, busNo, POSTCODE_SEVERITY_INFO);
pBusInfo->chanInfo.addrType = ADDRTYPE_localPhysical;
pBusInfo->flags.server = inmsg->hdr.Flags.server;
- pBusInfo->chanInfo.channelAddr = cmd->createBus.channelAddr;
- pBusInfo->chanInfo.nChannelBytes = cmd->createBus.channelBytes;
- pBusInfo->chanInfo.channelTypeGuid = cmd->createBus.busDataTypeGuid;
- pBusInfo->chanInfo.channelInstGuid = cmd->createBus.busInstGuid;
+ pBusInfo->chanInfo.channelAddr = cmd->create_bus.channel_addr;
+ pBusInfo->chanInfo.nChannelBytes = cmd->create_bus.channel_bytes;
+ pBusInfo->chanInfo.channelTypeGuid = cmd->create_bus.bus_data_type_uuid;
+ pBusInfo->chanInfo.channelInstGuid = cmd->create_bus.bus_inst_uuid;
list_add(&pBusInfo->entry, &BusInfoList);
static void
bus_destroy(CONTROLVM_MESSAGE *inmsg)
{
- CONTROLVM_MESSAGE_PACKET *cmd = &inmsg->cmd;
- ulong busNo = cmd->destroyBus.busNo;
+ struct controlvm_message_packet *cmd = &inmsg->cmd;
+ ulong busNo = cmd->destroy_bus.bus_no;
VISORCHIPSET_BUS_INFO *pBusInfo;
int rc = CONTROLVM_RESP_SUCCESS;
static void
bus_configure(CONTROLVM_MESSAGE *inmsg, PARSER_CONTEXT *parser_ctx)
{
- CONTROLVM_MESSAGE_PACKET *cmd = &inmsg->cmd;
- ulong busNo = cmd->configureBus.busNo;
+ struct controlvm_message_packet *cmd = &inmsg->cmd;
+ ulong busNo = cmd->configure_bus.bus_no;
VISORCHIPSET_BUS_INFO *pBusInfo = NULL;
int rc = CONTROLVM_RESP_SUCCESS;
char s[99];
- busNo = cmd->configureBus.busNo;
+ busNo = cmd->configure_bus.bus_no;
POSTCODE_LINUX_3(BUS_CONFIGURE_ENTRY_PC, busNo, POSTCODE_SEVERITY_INFO);
pBusInfo = findbus(&BusInfoList, busNo);
goto Away;
}
- pBusInfo->partitionHandle = cmd->configureBus.guestHandle;
+ pBusInfo->partitionHandle = cmd->configure_bus.guest_handle;
pBusInfo->partitionGuid = parser_id_get(parser_ctx);
parser_param_start(parser_ctx, PARSERSTRING_NAME);
pBusInfo->name = parser_string_get(parser_ctx);
static void
my_device_create(CONTROLVM_MESSAGE *inmsg)
{
- CONTROLVM_MESSAGE_PACKET *cmd = &inmsg->cmd;
- ulong busNo = cmd->createDevice.busNo;
- ulong devNo = cmd->createDevice.devNo;
+ struct controlvm_message_packet *cmd = &inmsg->cmd;
+ ulong busNo = cmd->create_device.busNo;
+ ulong devNo = cmd->create_device.devNo;
VISORCHIPSET_DEVICE_INFO *pDevInfo = NULL;
VISORCHIPSET_BUS_INFO *pBusInfo = NULL;
int rc = CONTROLVM_RESP_SUCCESS;
INIT_LIST_HEAD(&pDevInfo->entry);
pDevInfo->busNo = busNo;
pDevInfo->devNo = devNo;
- pDevInfo->devInstGuid = cmd->createDevice.devInstGuid;
+ pDevInfo->devInstGuid = cmd->create_device.devInstGuid;
POSTCODE_LINUX_4(DEVICE_CREATE_ENTRY_PC, devNo, busNo,
POSTCODE_SEVERITY_INFO);
pDevInfo->chanInfo.addrType = ADDRTYPE_localTest;
else
pDevInfo->chanInfo.addrType = ADDRTYPE_localPhysical;
- pDevInfo->chanInfo.channelAddr = cmd->createDevice.channelAddr;
- pDevInfo->chanInfo.nChannelBytes = cmd->createDevice.channelBytes;
- pDevInfo->chanInfo.channelTypeGuid = cmd->createDevice.dataTypeGuid;
- pDevInfo->chanInfo.intr = cmd->createDevice.intr;
+ pDevInfo->chanInfo.channelAddr = cmd->create_device.channelAddr;
+ pDevInfo->chanInfo.nChannelBytes = cmd->create_device.channelBytes;
+ pDevInfo->chanInfo.channelTypeGuid = cmd->create_device.dataTypeGuid;
+ pDevInfo->chanInfo.intr = cmd->create_device.intr;
list_add(&pDevInfo->entry, &DevInfoList);
POSTCODE_LINUX_4(DEVICE_CREATE_EXIT_PC, devNo, busNo,
POSTCODE_SEVERITY_INFO);
static void
my_device_changestate(CONTROLVM_MESSAGE *inmsg)
{
- CONTROLVM_MESSAGE_PACKET *cmd = &inmsg->cmd;
- ulong busNo = cmd->deviceChangeState.busNo;
- ulong devNo = cmd->deviceChangeState.devNo;
- struct spar_segment_state state = cmd->deviceChangeState.state;
+ struct controlvm_message_packet *cmd = &inmsg->cmd;
+ ulong busNo = cmd->device_change_state.bus_no;
+ ulong devNo = cmd->device_change_state.dev_no;
+ struct spar_segment_state state = cmd->device_change_state.state;
VISORCHIPSET_DEVICE_INFO *pDevInfo = NULL;
int rc = CONTROLVM_RESP_SUCCESS;
static void
my_device_destroy(CONTROLVM_MESSAGE *inmsg)
{
- CONTROLVM_MESSAGE_PACKET *cmd = &inmsg->cmd;
- ulong busNo = cmd->destroyDevice.busNo;
- ulong devNo = cmd->destroyDevice.devNo;
+ struct controlvm_message_packet *cmd = &inmsg->cmd;
+ ulong busNo = cmd->destroy_device.bus_no;
+ ulong devNo = cmd->destroy_device.dev_no;
VISORCHIPSET_DEVICE_INFO *pDevInfo = NULL;
int rc = CONTROLVM_RESP_SUCCESS;
static void
parahotplug_request_kickoff(struct parahotplug_request *req)
{
- CONTROLVM_MESSAGE_PACKET *cmd = &req->msg.cmd;
+ struct controlvm_message_packet *cmd = &req->msg.cmd;
char env_cmd[40], env_id[40], env_state[40], env_bus[40], env_dev[40],
env_func[40];
char *envp[] = {
sprintf(env_cmd, "SPAR_PARAHOTPLUG=1");
sprintf(env_id, "SPAR_PARAHOTPLUG_ID=%d", req->id);
sprintf(env_state, "SPAR_PARAHOTPLUG_STATE=%d",
- cmd->deviceChangeState.state.active);
+ cmd->device_change_state.state.active);
sprintf(env_bus, "SPAR_PARAHOTPLUG_BUS=%d",
- cmd->deviceChangeState.busNo);
+ cmd->device_change_state.bus_no);
sprintf(env_dev, "SPAR_PARAHOTPLUG_DEVICE=%d",
- cmd->deviceChangeState.devNo >> 3);
+ cmd->device_change_state.dev_no >> 3);
sprintf(env_func, "SPAR_PARAHOTPLUG_FUNCTION=%d",
- cmd->deviceChangeState.devNo & 0x7);
+ cmd->device_change_state.dev_no & 0x7);
LOGINF("parahotplug_request_kickoff: state=%d, bdf=%d/%d/%d, id=%u\n",
- cmd->deviceChangeState.state.active,
- cmd->deviceChangeState.busNo, cmd->deviceChangeState.devNo >> 3,
- cmd->deviceChangeState.devNo & 7, req->id);
+ cmd->device_change_state.state.active,
+ cmd->device_change_state.bus_no,
+ cmd->device_change_state.dev_no >> 3,
+ cmd->device_change_state.dev_no & 7, req->id);
kobject_uevent_env(&Visorchipset_platform_device.dev.kobj, KOBJ_CHANGE,
envp);
controlvm_respond_physdev_changestate(
&req->msg.hdr,
CONTROLVM_RESP_ERROR_DEVICE_UDEV_TIMEOUT,
- req->msg.cmd.deviceChangeState.state);
+ req->msg.cmd.device_change_state.state);
parahotplug_request_destroy(req);
}
}
*/
list_del(pos);
spin_unlock(&Parahotplug_request_list_lock);
- req->msg.cmd.deviceChangeState.state.active = active;
+ req->msg.cmd.device_change_state.state.active = active;
if (req->msg.hdr.Flags.responseExpected)
controlvm_respond_physdev_changestate(
&req->msg.hdr, CONTROLVM_RESP_SUCCESS,
- req->msg.cmd.deviceChangeState.state);
+ req->msg.cmd.device_change_state.state);
parahotplug_request_destroy(req);
return 0;
}
return;
}
- if (inmsg->cmd.deviceChangeState.state.active) {
+ if (inmsg->cmd.device_change_state.state.active) {
/* For enable messages, just respond with success
* right away. This is a bit of a hack, but there are
* issues with the early enable messages we get (with
*/
parahotplug_request_kickoff(req);
controlvm_respond_physdev_changestate(&inmsg->hdr,
- CONTROLVM_RESP_SUCCESS,
- inmsg->cmd.
- deviceChangeState.state);
+ CONTROLVM_RESP_SUCCESS, inmsg->cmd.
+ device_change_state.state);
parahotplug_request_destroy(req);
} else {
/* For disable messages, add the request to the
static BOOL
handle_command(CONTROLVM_MESSAGE inmsg, HOSTADDRESS channel_addr)
{
- CONTROLVM_MESSAGE_PACKET *cmd = &inmsg.cmd;
+ struct controlvm_message_packet *cmd = &inmsg.cmd;
u64 parametersAddr = 0;
u32 parametersBytes = 0;
PARSER_CONTEXT *parser_ctx = NULL;
switch (inmsg.hdr.Id) {
case CONTROLVM_CHIPSET_INIT:
LOGINF("CHIPSET_INIT(#busses=%lu,#switches=%lu)",
- (ulong) inmsg.cmd.initChipset.busCount,
- (ulong) inmsg.cmd.initChipset.switchCount);
+ (ulong) inmsg.cmd.init_chipset.bus_count,
+ (ulong) inmsg.cmd.init_chipset.switch_count);
chipset_init(&inmsg);
break;
case CONTROLVM_BUS_CREATE:
LOGINF("BUS_CREATE(%lu,#devs=%lu)",
- (ulong) cmd->createBus.busNo,
- (ulong) cmd->createBus.deviceCount);
+ (ulong) cmd->create_bus.bus_no,
+ (ulong) cmd->create_bus.dev_count);
bus_create(&inmsg);
break;
case CONTROLVM_BUS_DESTROY:
- LOGINF("BUS_DESTROY(%lu)", (ulong) cmd->destroyBus.busNo);
+ LOGINF("BUS_DESTROY(%lu)", (ulong) cmd->destroy_bus.bus_no);
bus_destroy(&inmsg);
break;
case CONTROLVM_BUS_CONFIGURE:
- LOGINF("BUS_CONFIGURE(%lu)", (ulong) cmd->configureBus.busNo);
+ LOGINF("BUS_CONFIGURE(%lu)", (ulong) cmd->configure_bus.bus_no);
bus_configure(&inmsg, parser_ctx);
break;
case CONTROLVM_DEVICE_CREATE:
LOGINF("DEVICE_CREATE(%lu,%lu)",
- (ulong) cmd->createDevice.busNo,
- (ulong) cmd->createDevice.devNo);
+ (ulong) cmd->create_device.busNo,
+ (ulong) cmd->create_device.devNo);
my_device_create(&inmsg);
break;
case CONTROLVM_DEVICE_CHANGESTATE:
- if (cmd->deviceChangeState.flags.physicalDevice) {
+ if (cmd->device_change_state.flags.phys_device) {
LOGINF("DEVICE_CHANGESTATE for physical device (%lu,%lu, active=%lu)",
- (ulong) cmd->deviceChangeState.busNo,
- (ulong) cmd->deviceChangeState.devNo,
- (ulong) cmd->deviceChangeState.state.active);
+ (ulong) cmd->device_change_state.bus_no,
+ (ulong) cmd->device_change_state.dev_no,
+ (ulong) cmd->device_change_state.state.active);
parahotplug_process_message(&inmsg);
} else {
LOGINF("DEVICE_CHANGESTATE for virtual device (%lu,%lu, state.Alive=0x%lx)",
- (ulong) cmd->deviceChangeState.busNo,
- (ulong) cmd->deviceChangeState.devNo,
- (ulong) cmd->deviceChangeState.state.alive);
+ (ulong) cmd->device_change_state.bus_no,
+ (ulong) cmd->device_change_state.dev_no,
+ (ulong) cmd->device_change_state.state.alive);
/* save the hdr and cmd structures for later use */
/* when sending back the response to Command */
my_device_changestate(&inmsg);
break;
case CONTROLVM_DEVICE_DESTROY:
LOGINF("DEVICE_DESTROY(%lu,%lu)",
- (ulong) cmd->destroyDevice.busNo,
- (ulong) cmd->destroyDevice.devNo);
+ (ulong) cmd->destroy_device.bus_no,
+ (ulong) cmd->destroy_device.dev_no);
my_device_destroy(&inmsg);
break;
case CONTROLVM_DEVICE_CONFIGURE:
LOGINF("DEVICE_CONFIGURE(%lu,%lu)",
- (ulong) cmd->configureDevice.busNo,
- (ulong) cmd->configureDevice.devNo);
+ (ulong) cmd->configure_device.busNo,
+ (ulong) cmd->configure_device.devNo);
/* no op for now, just send a respond that we passed */
if (inmsg.hdr.Flags.responseExpected)
controlvm_respond(&inmsg.hdr, CONTROLVM_RESP_SUCCESS);
/* send init chipset msg */
msg.hdr.Id = CONTROLVM_CHIPSET_INIT;
- msg.cmd.initChipset.busCount = 23;
- msg.cmd.initChipset.switchCount = 0;
+ msg.cmd.init_chipset.bus_count = 23;
+ msg.cmd.init_chipset.switch_count = 0;
chipset_init(&msg);
}
/* reuse IOVM create bus message */
- if (localCrashCreateBusMsg.cmd.createBus.channelAddr != 0)
+ if (localCrashCreateBusMsg.cmd.create_bus.channel_addr != 0)
bus_create(&localCrashCreateBusMsg);
else {
LOGERR("CrashCreateBusMsg is null, no dump will be taken");
}
/* reuse create device message for storage device */
- if (localCrashCreateDevMsg.cmd.createDevice.channelAddr != 0)
+ if (localCrashCreateDevMsg.cmd.create_device.channelAddr != 0)
my_device_create(&localCrashCreateDevMsg);
else {
LOGERR("CrashCreateDevMsg is null, no dump will be taken");
projects / platform / kernel / linux-rpi.git / commitdiff