ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3
authorFabio Porcedda <fabio.porcedda@gmail.com>
Wed, 27 Jun 2012 09:08:19 +0000 (11:08 +0200)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Mon, 9 Jul 2012 18:22:00 +0000 (20:22 +0200)
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
arch/arm/boot/dts/evk-pro3.dts [new file with mode: 0644]
arch/arm/boot/dts/ge863-pro3.dtsi [new file with mode: 0644]
arch/arm/mach-at91/Makefile.boot

diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
new file mode 100644 (file)
index 0000000..b7354e6
--- /dev/null
@@ -0,0 +1,41 @@
+/*
+ * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "ge863-pro3.dtsi"
+
+/ {
+       model = "Telit EVK-PRO3 for Telit GE863-PRO3";
+       compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
+
+       ahb {
+               apb {
+                       macb0: ethernet@fffc4000 {
+                               phy-mode = "rmii";
+                               status = "okay";
+                       };
+
+                       usb1: gadget@fffa4000 {
+                               atmel,vbus-gpio = <&pioC 5 0>;
+                               status = "okay";
+                       };
+               };
+
+               usb0: ohci@00500000 {
+                       num-ports = <2>;
+                       status = "okay";
+               };
+       };
+
+       i2c@0 {
+               status = "okay";
+       };
+
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
new file mode 100644 (file)
index 0000000..17136fc
--- /dev/null
@@ -0,0 +1,52 @@
+/*
+ * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "at91sam9260.dtsi"
+
+/ {
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               main_clock: clock@0 {
+                       compatible = "atmel,osc", "fixed-clock";
+                       clock-frequency = <6000000>;
+               };
+       };
+
+       ahb {
+               apb {
+                       dbgu: serial@fffff200 {
+                               status = "okay";
+                       };
+               };
+
+               nand0: nand@40000000 {
+                       nand-bus-width = <8>;
+                       nand-ecc-mode = "soft";
+                       nand-on-flash-bbt;
+                       status = "okay";
+
+                       boot@0 {
+                               label = "boot";
+                               reg = <0x0 0x7c0000>;
+                       };
+
+                       root@07c0000 {
+                               label = "root";
+                               reg = <0x7c0000 0x7840000>;
+                       };
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
+       };
+};
index 9e84fe4..11c3ca7 100644 (file)
@@ -16,6 +16,7 @@ endif
 # Keep dtb files sorted alphabetically for each SoC
 # sam9260
 dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
 dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
 dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
 # sam9263