struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
return 0;
/* If the left PGA is enabled hit that VU bit... */
- if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
- return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
- reg_cache[WM8962_HPOUTL_VOLUME]);
+ ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
+ if (ret & WM8962_HPOUTL_PGA_ENA) {
+ snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
+ snd_soc_read(codec, WM8962_HPOUTL_VOLUME));
+ return 1;
+ }
/* ...otherwise the right. The VU is stereo. */
- if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
- return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
- reg_cache[WM8962_HPOUTR_VOLUME]);
+ if (ret & WM8962_HPOUTR_PGA_ENA)
+ snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
+ snd_soc_read(codec, WM8962_HPOUTR_VOLUME));
- return 0;
+ return 1;
}
/* The VU bits for the speakers are in a different register to the mute
int ret;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
- u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
bool dmicclk, dmicdat;
/* Put the speakers into mono mode? */
if (pdata->spk_mono)
- reg_cache[WM8962_CLASS_D_CONTROL_2]
- |= WM8962_SPK_MONO;
+ snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2,
+ WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
+
/* Micbias setup, detection enable and detection
* threasholds. */