#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
-/* Relocation to SDRAM works on all ARM boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
#endif
#if !defined(CONFIG_SYS_NO_FLASH)
ulong flash_size;
#endif
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
- extern void malloc_bin_reloc (void);
-#if defined(CONFIG_CMD_BMP)
- extern void bmp_reloc(void);
-#endif
-#if defined(CONFIG_CMD_I2C)
- extern void i2c_reloc(void);
-#endif
-#endif
gd = id;
bd = gd->bd;
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
- /*
- * We have to relocate the command table manually
- */
- fixup_cmdtable(&__u_boot_cmd_start,
- (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#if defined(CONFIG_CMD_BMP)
- bmp_reloc();
-#endif
-#if defined(CONFIG_CMD_I2C)
- i2c_reloc();
-#endif
-#if defined(CONFIG_CMD_ONENAND)
- onenand_reloc();
-#endif
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
-
#ifdef CONFIG_LOGBUFFER
logbuff_init_ptrs ();
#endif
#ifdef CONFIG_POST
post_output_backlog ();
-#ifndef CONFIG_RELOC_FIXUP_WORKS
- post_reloc ();
-#endif
#endif
/* The Malloc area is immediately below the monitor copy in DRAM */
malloc_start = dest_addr - TOTAL_MALLOC_LEN;
mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
- malloc_bin_reloc ();
-#endif
#if !defined(CONFIG_SYS_NO_FLASH)
puts ("FLASH: ");
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
+#define CONFIG_NEEDS_MANUAL_RELOC
+
#endif
monitor_flash_len = _edata - _text;
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/*
* We have to relocate the command table manually
*/
fixup_cmdtable(&__u_boot_cmd_start,
(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
/* there are some other pointer constants we must deal with */
#ifndef CONFIG_ENV_IS_NOWHERE
# define CONFIG_BFIN_SCRATCH_REG retn
#endif
-/* Relocation to SDRAM works on all Blackfin boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
/* Make sure the structure is properly aligned */
#if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR)
# error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
-#define CONFIG_RELOC_FIXUP_WORKS
-
#endif
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
+#define CONFIG_NEEDS_MANUAL_RELOC
+
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
#define CONFIG_SYS_BOOT_GET_CMDLINE
monitor_flash_len = (ulong)&__init_end - dest_addr;
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/*
* We have to relocate the command table manually
*/
fixup_cmdtable(&__u_boot_cmd_start,
(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
/* there are some other pointer constants we must deal with */
#ifndef CONFIG_ENV_IS_NOWHERE
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
-/* Relocation to SDRAM works on all Microblaze boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
#endif
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
+#define CONFIG_NEEDS_MANUAL_RELOC
+
#endif
monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/*
* We have to relocate the command table manually
*/
fixup_cmdtable(&__u_boot_cmd_start,
(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
/* there are some other pointer constants we must deal with */
#ifndef CONFIG_ENV_IS_NOWHERE
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
-/* Relocation to SDRAM works on all NIOS2 boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
#endif
#define CONFIG_SYS_NUM_TLBCAMS 16
#endif
-/* Relocation to SDRAM works on all PPC boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
/* Since so many PPC SOCs have a semi-common LBC, define this here */
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
defined(CONFIG_MPC83xx)
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
-/* Relocation to SDRAM works on all sh boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
#endif
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
+#define CONFIG_NEEDS_MANUAL_RELOC
+
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
post_run(NULL, POST_ROM | post_bootmode_get(0));
#endif
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/*
* We have to relocate the command table manually
*/
fixup_cmdtable(&__u_boot_cmd_start,
(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
#if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
puts("AMBA:\n");
U_BOOT_CMD_MKENT(display, 5, 0, do_bmp_display, "", ""),
};
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
void bmp_reloc(void) {
fixup_cmdtable(cmd_bmp_sub, ARRAY_SIZE(cmd_bmp_sub));
}
ulong load_end = 0;
int ret;
boot_os_fn *boot_fn;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
static int relocated = 0;
/* relocate boot function table */
"Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur",
};
-#ifdef CONFIG_RELOC_FIXUP_WORKS
-#define RELOC(a) a
-#else
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
#define RELOC(a) ((typeof(a))((unsigned long)(a) + gd->reloc_off))
+#else
+#define RELOC(a) a
#endif
int mk_date (char *, struct rtc_time *);
U_BOOT_CMD_MKENT(speed, 1, 1, do_i2c_bus_speed, "", ""),
};
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
void i2c_reloc(void) {
fixup_cmdtable(cmd_i2c_sub, ARRAY_SIZE(cmd_i2c_sub));
}
U_BOOT_CMD_MKENT(set, CONFIG_SYS_MAXARGS, 0, do_env_set, "", ""),
};
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
void env_reloc(void)
{
fixup_cmdtable(cmd_env_sub, ARRAY_SIZE(cmd_env_sub));
U_BOOT_CMD_MKENT(markbad, CONFIG_SYS_MAXARGS, 0, do_onenand_markbad, "", ""),
};
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
void onenand_reloc(void) {
fixup_cmdtable(cmd_onenand_sub, ARRAY_SIZE(cmd_onenand_sub));
}
}
#endif
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
DECLARE_GLOBAL_DATA_PTR;
void fixup_cmdtable(cmd_tbl_t *cmdtp, int size)
IAV(120), IAV(121), IAV(122), IAV(123), IAV(124), IAV(125), IAV(126), IAV(127)
};
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
void malloc_bin_reloc (void)
{
unsigned long *p = (unsigned long *)(&av_[2]);
void env_relocate (void)
{
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
extern void env_reloc(void);
env_reloc();
}
#ifdef __U_BOOT__
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
static void u_boot_hush_reloc(void)
{
unsigned long addr;
top_vars->next = 0;
top_vars->flg_export = 0;
top_vars->flg_read_only = 1;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
u_boot_hush_reloc();
#endif
}
{
for (; table->id >= 0; ++table) {
if (table->id == id)
-#if defined(USE_HOSTCC) || defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(USE_HOSTCC) || !defined(CONFIG_NEEDS_MANUAL_RELOC)
return table->lname;
#else
return table->lname + gd->reloc_off;
fprintf (stderr, "\n");
#else
for (t = table; t->id >= 0; ++t) {
-#ifdef CONFIG_RELOC_FIXUP_WORKS
- if (t->sname && strcmp(t->sname, name) == 0)
-#else
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
if (t->sname && strcmp(t->sname + gd->reloc_off, name) == 0)
+#else
+ if (t->sname && strcmp(t->sname, name) == 0)
#endif
return (t->id);
}
int serial_register (struct serial_device *dev)
{
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
dev->init += gd->reloc_off;
dev->setbrg += gd->reloc_off;
dev->getc += gd->reloc_off;
int stdio_init (void)
{
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/* already relocated for current ARM implementation */
ulong relocation_offset = gd->reloc_off;
int i;
stdio_names[i] = (char *) (((ulong) stdio_names[i]) +
relocation_offset);
}
-#endif /* !CONFIG_RELOC_FIXUP_WORKS */
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
/* Initialize the list */
INIT_LIST_HEAD(&(devs.list));
char *name;
name = drvr->name;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
name += gd->reloc_off;
#endif
while (name) {
name = drvr->name;
reloc_get_dev = drvr->get_dev;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
name += gd->reloc_off;
reloc_get_dev += gd->reloc_off;
#endif
At config level:
- Define CONFIG_RELOC_FIXUP_WORKS.
Undefine CONFIG_SYS_ARM_WITHOUT_RELOC
* WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING *
Boards which are not fixed to support relocation will be REMOVED!
-Eventually, CONFIG_SYS_ARM_WITHOUT_RELOC and CONFIG_RELOC_FIXUP_WORKS will
-disappear and boards which have to migrated to relocation will disappear too.
+Eventually, CONFIG_SYS_ARM_WITHOUT_RELOC will disappear and boards
+which have to migrated to relocation will disappear too.
-----------------------------------------------------------------------------
if (nand_scan(mtd, maxchips) == 0) {
if (!mtd->name)
mtd->name = (char *)default_nand_name;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
else
mtd->name += gd->reloc_off;
#endif
int i;
for (i = 0; i < bb_miiphy_buses_num; i++) {
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
/* Relocate the hook pointers*/
BB_MII_RELOCATE(bb_miiphy_buses[i].init, gd->reloc_off);
BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_active, gd->reloc_off);
{
ubifs_compressors[compr->compr_type] = compr;
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
ubifs_compressors[compr->compr_type]->name += gd->reloc_off;
ubifs_compressors[compr->compr_type]->capi_name += gd->reloc_off;
ubifs_compressors[compr->compr_type]->decompress += gd->reloc_off;
#endif /* CONFIG_SYS_LONGHELP */
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
void fixup_cmdtable(cmd_tbl_t *cmdtp, int size);
#endif
#endif /* __COMMAND_H */
int post_run (char *name, int flags);
int post_info (char *name);
int post_log (char *format, ...);
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
void post_reloc (void);
#endif
unsigned long post_time_ms (unsigned long base);
return 0;
}
-#ifndef CONFIG_RELOC_FIXUP_WORKS
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
void post_reloc (void)
{
unsigned int i;