}
# Until "catch syscall" is implemented on other targets...
-if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
+if { ![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"] } {
continue
}
standard_testfile
+if { [prepare_for_testing ${testfile}.exp $testfile ${testfile}.c] } {
+ untested catch-syscall.exp
+ return -1
+}
+
# All (but the last) syscalls from the example code
# They are ordered according to the file, so do not change this.
set all_syscalls { "close" "chroot" }
set all_syscalls_numbers { }
+
# The last syscall (exit()) does not return, so
# we cannot expect the catchpoint to be triggered
# twice. It is a special case.
set last_syscall "exit_group"
-
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested catch-syscall.exp
- return -1
-}
+set last_syscall_number { }
# Internal procedure used to check if, after issuing a 'catch syscall'
# command (without arguments), the 'info breakpoints' command displays
# that '"any syscall"' is to be caught.
proc check_info_bp_any_syscall {} {
- global gdb_prompt
-
# Verifying that the catchpoint appears in the 'info breakpoints'
# command, but with "<any syscall>".
set thistest "catch syscall appears in 'info breakpoints'"
# command (with arguments), the 'info breakpoints' command displays
# that the syscall 'X' is to be caught.
proc check_info_bp_specific_syscall { syscall } {
- global gdb_prompt
-
set thistest "syscall(s) $syscall appears in 'info breakpoints'"
gdb_test "info breakpoints" ".*catchpoint.*keep y.*syscall(\[(\]s\[)\])? (.)?${syscall}(.)?.*" $thistest
}
# command (with many arguments), the 'info breakpoints' command displays
# that the syscalls 'X' are to be caught.
proc check_info_bp_many_syscalls { syscalls } {
- global gdb_prompt
set filter_str ""
foreach name $syscalls {
# This procedure checks if there was a call to a syscall.
proc check_call_to_syscall { syscall } {
- global gdb_prompt
+ global decimal
set thistest "program has called $syscall"
- gdb_test "continue" "Catchpoint .*(call to syscall .?${syscall}.?).*" $thistest
+ gdb_test "continue" "Catchpoint $decimal \\(call to syscall .?${syscall}.?\\).*" $thistest
}
# This procedure checks if the syscall returned.
proc check_return_from_syscall { syscall } {
- global gdb_prompt
+ global decimal
set thistest "syscall $syscall has returned"
- gdb_test "continue" "Catchpoint .*(returned from syscall (.)?${syscall}(.)?).*" $thistest
+ gdb_test "continue" "Catchpoint $decimal \\(returned from syscall ${syscall}\\).*" $thistest
}
# Internal procedure that performs two 'continue' commands and checks if
# a syscall call AND return occur.
proc check_continue { syscall } {
- global gdb_prompt
-
# Testing if the 'continue' stops at the
# specified syscall_name. If it does, then it should
# first print that the infeior has called the syscall,
# Inserts a syscall catchpoint with an argument.
proc insert_catch_syscall_with_arg { syscall } {
- global gdb_prompt
+ global decimal
# Trying to set the catchpoint
set thistest "catch syscall with arguments ($syscall)"
- gdb_test "catch syscall $syscall" "Catchpoint .*(syscall (.)?${syscall}(.)?( \[\[0-9\]+\])?).*" $thistest
+ gdb_test "catch syscall $syscall" "Catchpoint $decimal \\(syscall \'?${syscall}\'?( \[${decimal}\])?\\)" $thistest
check_info_bp_specific_syscall $syscall
}
# Inserts a syscall catchpoint with many arguments.
proc insert_catch_syscall_with_many_args { syscalls numbers } {
- global gdb_prompt
+ global decimal
+
set catch [ join $syscalls " " ]
set filter_str ""
foreach name $syscalls number $numbers {
- set filter_str "${filter_str}'${name}' \[${number}\] "
+ set filter_str "${filter_str}'${name}' \\\[${number}\\\] "
}
set filter_str [ string trimright $filter_str " " ]
# Trying to set the catchpoint
set thistest "catch syscall with arguments ($filter_str)"
- gdb_test "catch syscall $catch" "Catchpoint .*(syscalls (.)?${filter_str}(.)?).*" $thistest
+ gdb_test "catch syscall $catch" "Catchpoint $decimal \\(syscalls ${filter_str}\\).*" $thistest
check_info_bp_many_syscalls $syscalls
}
proc check_for_program_end {} {
- global gdb_prompt
-
# Deleting the catchpoints
delete_breakpoints
gdb_continue_to_end
-
}
proc test_catch_syscall_without_args {} {
- global gdb_prompt all_syscalls last_syscall
+ global all_syscalls last_syscall decimal
with_test_prefix "without arguments" {
# Trying to set the syscall.
- gdb_test "catch syscall" "Catchpoint .*(syscall).*"
+ gdb_test "catch syscall" "Catchpoint $decimal \\(any syscall\\)"
check_info_bp_any_syscall
proc test_catch_syscall_with_args {} {
with_test_prefix "with arguments" {
- global gdb_prompt
-
set syscall_name "close"
insert_catch_syscall_with_arg $syscall_name
proc test_catch_syscall_with_many_args {} {
with_test_prefix "with many arguments" {
- global gdb_prompt all_syscalls all_syscalls_numbers
+ global all_syscalls all_syscalls_numbers
insert_catch_syscall_with_many_args $all_syscalls $all_syscalls_numbers
proc test_catch_syscall_with_wrong_args {} {
with_test_prefix "wrong args" {
- global gdb_prompt
-
# mlock is not called from the source
set syscall_name "mlock"
insert_catch_syscall_with_arg $syscall_name
proc test_catch_syscall_restarting_inferior {} {
with_test_prefix "restarting inferior" {
- global gdb_prompt
-
set syscall_name "chroot"
with_test_prefix "entry" {
proc test_catch_syscall_fail_nodatadir {} {
with_test_prefix "fail no datadir" {
- global gdb_prompt
-
# Sanitizing.
delete_breakpoints
}
proc do_syscall_tests {} {
- global gdb_prompt srcdir
-
# NOTE: We don't have to point gdb at the correct data-directory.
# For the build tree that is handled by INTERNAL_GDBFLAGS.
with_test_prefix "without args noxml" {
# We will need the syscall names even not using it because we
# need to know know many syscalls are in the example file.
- global gdb_prompt all_syscalls last_syscall
+ global all_syscalls last_syscall_number all_syscalls_numbers
delete_breakpoints
# Now, we should be able to set a catchpoint, and GDB shall
# not display the warning anymore.
- foreach name $all_syscalls {
- # Unfortunately, we don't know the syscall number that
- # will be caught because this information is
- # arch-dependent. Thus, we try to catch anything similar
- # to a number.
+ foreach name $all_syscalls number $all_syscalls_numbers {
with_test_prefix "$name" {
- check_continue "\[0-9\]*"
+ check_continue $number
}
}
# At last but not least, we check if the inferior has called
# the last (exit) syscall.
- check_call_to_syscall "\[0-9\]*"
+ check_call_to_syscall $last_syscall_number
delete_breakpoints
}
proc test_catch_syscall_with_args_noxml {} {
with_test_prefix "with args noxml" {
- global gdb_prompt
-
- # The number of the "close" syscall. This is our option for a
- # "long-estabilished" syscall in all Linux architectures, but
- # unfortunately x86_64 and a few other platforms don't "follow
- # the convention". Because of this, we need this ugly check
- # :-(.
- set close_number ""
- if { [istarget "x86_64-*-linux*"] } {
- set close_number "3"
- } else {
- set close_number "6"
- }
+ global all_syscalls_numbers
delete_breakpoints
- insert_catch_syscall_with_arg $close_number
+ # Inserting all syscalls numbers to be caught
+ foreach syscall_number $all_syscalls_numbers {
+ insert_catch_syscall_with_arg $syscall_number
+ }
- check_continue $close_number
+ # Checking that all syscalls are caught.
+ foreach syscall_number $all_syscalls_numbers {
+ check_continue $syscall_number
+ }
delete_breakpoints
}
proc test_catch_syscall_with_wrong_args_noxml {} {
with_test_prefix "with wrong args noxml" {
- global gdb_prompt
-
delete_breakpoints
# Even without XML support, GDB should not accept unknown
}
proc do_syscall_tests_without_xml {} {
- global gdb_prompt srcdir
-
# Make sure GDB doesn't load the syscalls xml from the system data
# directory.
gdb_test_no_output "set data-directory /the/path/to/nowhere"
# The only valid argument "catch syscall" should accept is the
# syscall number, and not the name (since it can't translate a
# name to a number).
- #
- # It's worth mentioning that we only try to catch the syscall
- # close(). This is because the syscall number is an arch-dependent
- # information, so we can't assume that we know every syscall number
- # in this system. Therefore, we have decided to use a "long-estabilished"
- # system call, and close() just sounded the right choice :-).
if [runto_main] then { test_catch_syscall_with_args_noxml }
# Now, we'll try to provide a syscall name (valid or not) to the command,
# This procedure fills the vector "all_syscalls_numbers" with the proper
# numbers for the used syscalls according to the architecture.
proc fill_all_syscalls_numbers {} {
- global all_syscalls_numbers
-
- # For Linux on x86, PPC, PPC64, SPARC, SPARC64 and ARM,
- # the numbers for the syscalls "close" and "chroot" are the same.
- if { [istarget "i\[34567\]86-*-linux*"]
- || [istarget "powerpc-*-linux*"] || [istarget "powerpc64-*-linux*"]
- || [istarget "sparc-*-linux*"] || [istarget "sparc64-*-linux*"]
- || [istarget "arm*-linux*"] } {
- set all_syscalls_numbers { "6" "61" }
- }
-}
+ global all_syscalls_numbers last_syscall_number
-# Start with a fresh gdb
+ set close_syscall [get_integer_valueof "close_syscall" -1]
+ set chroot_syscall [get_integer_valueof "chroot_syscall" -1]
+ set all_syscalls_numbers [list $close_syscall $chroot_syscall]
+ set last_syscall_number [get_integer_valueof "exit_group_syscall" -1]
+}
-gdb_exit
-set do_xml_test ![gdb_skip_xml_test]
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
+# Fill all the syscalls numbers before starting anything.
+fill_all_syscalls_numbers
# Execute the tests, using XML support
-if $do_xml_test {
+if { ![gdb_skip_xml_test] } {
+ clean_restart $binfile
do_syscall_tests
# Now, we have to see if GDB displays a warning when we
# don't set the data-directory but try to use catch syscall
# anyway. For that, we must restart GDB first.
- gdb_exit
- gdb_start
- gdb_reinitialize_dir $srcdir/$subdir
- gdb_load ${binfile}
+ clean_restart $binfile
test_catch_syscall_fail_nodatadir
}
# Restart gdb
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
+clean_restart $binfile
# Execute the tests, without XML support. In this case, GDB will
# only display syscall numbers, and not syscall names.
projects / external / binutils.git / commitdiff