#include <linux/input.h>
#include <linux/libps2.h>
#include <linux/serio.h>
+#include <linux/slab.h>
#include "psmouse.h"
#include "byd.h"
+/* PS2 Bits */
#define PS2_Y_OVERFLOW BIT_MASK(7)
#define PS2_X_OVERFLOW BIT_MASK(6)
#define PS2_Y_SIGN BIT_MASK(5)
#define PS2_LEFT BIT_MASK(0)
/*
- * The touchpad reports gestures in the last byte of each packet. It can take
- * any of the following values:
+ * BYD pad constants
*/
-/* One-finger scrolling in one of the edge scroll zones. */
-#define BYD_SCROLLUP 0xCA
-#define BYD_SCROLLDOWN 0x36
-#define BYD_SCROLLLEFT 0xCB
-#define BYD_SCROLLRIGHT 0x35
-/* Two-finger scrolling. */
-#define BYD_2DOWN 0x2B
-#define BYD_2UP 0xD5
-#define BYD_2LEFT 0xD6
-#define BYD_2RIGHT 0x2A
-/* Pinching in or out. */
-#define BYD_ZOOMOUT 0xD8
-#define BYD_ZOOMIN 0x28
-/* Three-finger swipe. */
-#define BYD_3UP 0xD3
-#define BYD_3DOWN 0x2D
-#define BYD_3LEFT 0xD4
-#define BYD_3RIGHT 0x2C
-/* Four-finger swipe. */
-#define BYD_4UP 0xCD
-#define BYD_4DOWN 0x33
+/*
+ * True device resolution is unknown, however experiments show the
+ * resolution is about 111 units/mm.
+ * Absolute coordinate packets are in the range 0-255 for both X and Y
+ * we pick ABS_X/ABS_Y dimensions which are multiples of 256 and in
+ * the right ballpark given the touchpad's physical dimensions and estimate
+ * resolution per spec sheet, device active area dimensions are
+ * 101.6 x 60.1 mm.
+ */
+#define BYD_PAD_WIDTH 11264
+#define BYD_PAD_HEIGHT 6656
+#define BYD_PAD_RESOLUTION 111
-int byd_detect(struct psmouse *psmouse, bool set_properties)
+/*
+ * Given the above dimensions, relative packets velocity is in multiples of
+ * 1 unit / 11 milliseconds. We use this dt to estimate distance traveled
+ */
+#define BYD_DT 11
+/* Time in jiffies used to timeout various touch events (64 ms) */
+#define BYD_TOUCH_TIMEOUT msecs_to_jiffies(64)
+
+/* BYD commands reverse engineered from windows driver */
+
+/*
+ * Swipe gesture from off-pad to on-pad
+ * 0 : disable
+ * 1 : enable
+ */
+#define BYD_CMD_SET_OFFSCREEN_SWIPE 0x10cc
+/*
+ * Tap and drag delay time
+ * 0 : disable
+ * 1 - 8 : least to most delay
+ */
+#define BYD_CMD_SET_TAP_DRAG_DELAY_TIME 0x10cf
+/*
+ * Physical buttons function mapping
+ * 0 : enable
+ * 4 : normal
+ * 5 : left button custom command
+ * 6 : right button custom command
+ * 8 : disable
+ */
+#define BYD_CMD_SET_PHYSICAL_BUTTONS 0x10d0
+/*
+ * Absolute mode (1 byte X/Y resolution)
+ * 0 : disable
+ * 2 : enable
+ */
+#define BYD_CMD_SET_ABSOLUTE_MODE 0x10d1
+/*
+ * Two finger scrolling
+ * 1 : vertical
+ * 2 : horizontal
+ * 3 : vertical + horizontal
+ * 4 : disable
+ */
+#define BYD_CMD_SET_TWO_FINGER_SCROLL 0x10d2
+/*
+ * Handedness
+ * 1 : right handed
+ * 2 : left handed
+ */
+#define BYD_CMD_SET_HANDEDNESS 0x10d3
+/*
+ * Tap to click
+ * 1 : enable
+ * 2 : disable
+ */
+#define BYD_CMD_SET_TAP 0x10d4
+/*
+ * Tap and drag
+ * 1 : tap and hold to drag
+ * 2 : tap and hold to drag + lock
+ * 3 : disable
+ */
+#define BYD_CMD_SET_TAP_DRAG 0x10d5
+/*
+ * Touch sensitivity
+ * 1 - 7 : least to most sensitive
+ */
+#define BYD_CMD_SET_TOUCH_SENSITIVITY 0x10d6
+/*
+ * One finger scrolling
+ * 1 : vertical
+ * 2 : horizontal
+ * 3 : vertical + horizontal
+ * 4 : disable
+ */
+#define BYD_CMD_SET_ONE_FINGER_SCROLL 0x10d7
+/*
+ * One finger scrolling function
+ * 1 : free scrolling
+ * 2 : edge motion
+ * 3 : free scrolling + edge motion
+ * 4 : disable
+ */
+#define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC 0x10d8
+/*
+ * Sliding speed
+ * 1 - 5 : slowest to fastest
+ */
+#define BYD_CMD_SET_SLIDING_SPEED 0x10da
+/*
+ * Edge motion
+ * 1 : disable
+ * 2 : enable when dragging
+ * 3 : enable when dragging and pointing
+ */
+#define BYD_CMD_SET_EDGE_MOTION 0x10db
+/*
+ * Left edge region size
+ * 0 - 7 : smallest to largest width
+ */
+#define BYD_CMD_SET_LEFT_EDGE_REGION 0x10dc
+/*
+ * Top edge region size
+ * 0 - 9 : smallest to largest height
+ */
+#define BYD_CMD_SET_TOP_EDGE_REGION 0x10dd
+/*
+ * Disregard palm press as clicks
+ * 1 - 6 : smallest to largest
+ */
+#define BYD_CMD_SET_PALM_CHECK 0x10de
+/*
+ * Right edge region size
+ * 0 - 7 : smallest to largest width
+ */
+#define BYD_CMD_SET_RIGHT_EDGE_REGION 0x10df
+/*
+ * Bottom edge region size
+ * 0 - 9 : smallest to largest height
+ */
+#define BYD_CMD_SET_BOTTOM_EDGE_REGION 0x10e1
+/*
+ * Multitouch gestures
+ * 1 : enable
+ * 2 : disable
+ */
+#define BYD_CMD_SET_MULTITOUCH 0x10e3
+/*
+ * Edge motion speed
+ * 0 : control with finger pressure
+ * 1 - 9 : slowest to fastest
+ */
+#define BYD_CMD_SET_EDGE_MOTION_SPEED 0x10e4
+/*
+ * Two finger scolling function
+ * 0 : free scrolling
+ * 1 : free scrolling (with momentum)
+ * 2 : edge motion
+ * 3 : free scrolling (with momentum) + edge motion
+ * 4 : disable
+ */
+#define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC 0x10e5
+
+/*
+ * The touchpad generates a mixture of absolute and relative packets, indicated
+ * by the the last byte of each packet being set to one of the following:
+ */
+#define BYD_PACKET_ABSOLUTE 0xf8
+#define BYD_PACKET_RELATIVE 0x00
+/* Multitouch gesture packets */
+#define BYD_PACKET_PINCH_IN 0xd8
+#define BYD_PACKET_PINCH_OUT 0x28
+#define BYD_PACKET_ROTATE_CLOCKWISE 0x29
+#define BYD_PACKET_ROTATE_ANTICLOCKWISE 0xd7
+#define BYD_PACKET_TWO_FINGER_SCROLL_RIGHT 0x2a
+#define BYD_PACKET_TWO_FINGER_SCROLL_DOWN 0x2b
+#define BYD_PACKET_TWO_FINGER_SCROLL_UP 0xd5
+#define BYD_PACKET_TWO_FINGER_SCROLL_LEFT 0xd6
+#define BYD_PACKET_THREE_FINGER_SWIPE_RIGHT 0x2c
+#define BYD_PACKET_THREE_FINGER_SWIPE_DOWN 0x2d
+#define BYD_PACKET_THREE_FINGER_SWIPE_UP 0xd3
+#define BYD_PACKET_THREE_FINGER_SWIPE_LEFT 0xd4
+#define BYD_PACKET_FOUR_FINGER_DOWN 0x33
+#define BYD_PACKET_FOUR_FINGER_UP 0xcd
+#define BYD_PACKET_REGION_SCROLL_RIGHT 0x35
+#define BYD_PACKET_REGION_SCROLL_DOWN 0x36
+#define BYD_PACKET_REGION_SCROLL_UP 0xca
+#define BYD_PACKET_REGION_SCROLL_LEFT 0xcb
+#define BYD_PACKET_RIGHT_CORNER_CLICK 0xd2
+#define BYD_PACKET_LEFT_CORNER_CLICK 0x2e
+#define BYD_PACKET_LEFT_AND_RIGHT_CORNER_CLICK 0x2f
+#define BYD_PACKET_ONTO_PAD_SWIPE_RIGHT 0x37
+#define BYD_PACKET_ONTO_PAD_SWIPE_DOWN 0x30
+#define BYD_PACKET_ONTO_PAD_SWIPE_UP 0xd0
+#define BYD_PACKET_ONTO_PAD_SWIPE_LEFT 0xc9
+
+struct byd_data {
+ struct timer_list timer;
+ s32 abs_x;
+ s32 abs_y;
+ typeof(jiffies) last_touch_time;
+ bool btn_left;
+ bool btn_right;
+ bool touch;
+};
+
+static void byd_report_input(struct psmouse *psmouse)
{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- unsigned char param[4];
+ struct byd_data *priv = psmouse->private;
+ struct input_dev *dev = psmouse->dev;
- param[0] = 0x03;
- param[1] = 0x00;
- param[2] = 0x00;
- param[3] = 0x00;
+ input_report_key(dev, BTN_TOUCH, priv->touch);
+ input_report_key(dev, BTN_TOOL_FINGER, priv->touch);
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
- return -1;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
- return -1;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
- return -1;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
- return -1;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
- return -1;
+ input_report_abs(dev, ABS_X, priv->abs_x);
+ input_report_abs(dev, ABS_Y, priv->abs_y);
+ input_report_key(dev, BTN_LEFT, priv->btn_left);
+ input_report_key(dev, BTN_RIGHT, priv->btn_right);
- if (param[1] != 0x03 || param[2] != 0x64)
- return -ENODEV;
+ input_sync(dev);
+}
- psmouse_dbg(psmouse, "BYD touchpad detected\n");
+static void byd_clear_touch(unsigned long data)
+{
+ struct psmouse *psmouse = (struct psmouse *)data;
+ struct byd_data *priv = psmouse->private;
- if (set_properties) {
- psmouse->vendor = "BYD";
- psmouse->name = "TouchPad";
- }
+ serio_pause_rx(psmouse->ps2dev.serio);
+ priv->touch = false;
- return 0;
+ byd_report_input(psmouse);
+
+ serio_continue_rx(psmouse->ps2dev.serio);
+
+ /*
+ * Move cursor back to center of pad when we lose touch - this
+ * specifically improves user experience when moving cursor with one
+ * finger, and pressing a button with another.
+ */
+ priv->abs_x = BYD_PAD_WIDTH / 2;
+ priv->abs_y = BYD_PAD_HEIGHT / 2;
}
static psmouse_ret_t byd_process_byte(struct psmouse *psmouse)
{
- struct input_dev *dev = psmouse->dev;
+ struct byd_data *priv = psmouse->private;
u8 *pkt = psmouse->packet;
if (psmouse->pktcnt > 0 && !(pkt[0] & PS2_ALWAYS_1)) {
/* Otherwise, a full packet has been received */
switch (pkt[3]) {
- case 0: {
+ case BYD_PACKET_ABSOLUTE:
+ /* Only use absolute packets for the start of movement. */
+ if (!priv->touch) {
+ /* needed to detect tap */
+ typeof(jiffies) tap_time =
+ priv->last_touch_time + BYD_TOUCH_TIMEOUT;
+ priv->touch = time_after(jiffies, tap_time);
+
+ /* init abs position */
+ priv->abs_x = pkt[1] * (BYD_PAD_WIDTH / 256);
+ priv->abs_y = (255 - pkt[2]) * (BYD_PAD_HEIGHT / 256);
+ }
+ break;
+ case BYD_PACKET_RELATIVE: {
/* Standard packet */
/* Sign-extend if a sign bit is set. */
- unsigned int signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0;
- unsigned int signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0;
- int dx = signx | (int) pkt[1];
- int dy = signy | (int) pkt[2];
+ u32 signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0;
+ u32 signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0;
+ s32 dx = signx | (int) pkt[1];
+ s32 dy = signy | (int) pkt[2];
- input_report_rel(psmouse->dev, REL_X, dx);
- input_report_rel(psmouse->dev, REL_Y, -dy);
+ /* Update position based on velocity */
+ priv->abs_x += dx * BYD_DT;
+ priv->abs_y -= dy * BYD_DT;
- input_report_key(psmouse->dev, BTN_LEFT, pkt[0] & PS2_LEFT);
- input_report_key(psmouse->dev, BTN_RIGHT, pkt[0] & PS2_RIGHT);
- input_report_key(psmouse->dev, BTN_MIDDLE, pkt[0] & PS2_MIDDLE);
+ priv->touch = true;
break;
}
-
- case BYD_SCROLLDOWN:
- case BYD_2DOWN:
- input_report_rel(dev, REL_WHEEL, -1);
- break;
-
- case BYD_SCROLLUP:
- case BYD_2UP:
- input_report_rel(dev, REL_WHEEL, 1);
- break;
-
- case BYD_SCROLLLEFT:
- case BYD_2LEFT:
- input_report_rel(dev, REL_HWHEEL, -1);
- break;
-
- case BYD_SCROLLRIGHT:
- case BYD_2RIGHT:
- input_report_rel(dev, REL_HWHEEL, 1);
- break;
-
- case BYD_ZOOMOUT:
- case BYD_ZOOMIN:
- case BYD_3UP:
- case BYD_3DOWN:
- case BYD_3LEFT:
- case BYD_3RIGHT:
- case BYD_4UP:
- case BYD_4DOWN:
- break;
-
default:
psmouse_warn(psmouse,
"Unrecognized Z: pkt = %02x %02x %02x %02x\n",
return PSMOUSE_BAD_DATA;
}
- input_sync(dev);
+ priv->btn_left = pkt[0] & PS2_LEFT;
+ priv->btn_right = pkt[0] & PS2_RIGHT;
- return PSMOUSE_FULL_PACKET;
-}
+ byd_report_input(psmouse);
-/* Send a sequence of bytes, where each is ACKed before the next is sent. */
-static int byd_send_sequence(struct psmouse *psmouse, const u8 *seq, size_t len)
-{
- unsigned int i;
-
- for (i = 0; i < len; ++i) {
- if (ps2_command(&psmouse->ps2dev, NULL, seq[i]))
- return -1;
+ /* Reset time since last touch. */
+ if (priv->touch) {
+ priv->last_touch_time = jiffies;
+ mod_timer(&priv->timer, jiffies + BYD_TOUCH_TIMEOUT);
}
- return 0;
-}
-
-/* Keep scrolling after fingers are removed. */
-#define SCROLL_INERTIAL 0x01
-#define SCROLL_NO_INERTIAL 0x02
-
-/* Clicking can be done by tapping or pressing. */
-#define CLICK_BOTH 0x01
-/* Clicking can only be done by pressing. */
-#define CLICK_PRESS_ONLY 0x02
-static int byd_enable(struct psmouse *psmouse)
-{
- const u8 seq1[] = { 0xE2, 0x00, 0xE0, 0x02, 0xE0 };
- const u8 seq2[] = {
- 0xD3, 0x01,
- 0xD0, 0x00,
- 0xD0, 0x04,
- /* Whether clicking is done by tapping or pressing. */
- 0xD4, CLICK_PRESS_ONLY,
- 0xD5, 0x01,
- 0xD7, 0x03,
- /* Vertical and horizontal one-finger scroll zone inertia. */
- 0xD8, SCROLL_INERTIAL,
- 0xDA, 0x05,
- 0xDB, 0x02,
- 0xE4, 0x05,
- 0xD6, 0x01,
- 0xDE, 0x04,
- 0xE3, 0x01,
- 0xCF, 0x00,
- 0xD2, 0x03,
- /* Vertical and horizontal two-finger scrolling inertia. */
- 0xE5, SCROLL_INERTIAL,
- 0xD9, 0x02,
- 0xD9, 0x07,
- 0xDC, 0x03,
- 0xDD, 0x03,
- 0xDF, 0x03,
- 0xE1, 0x03,
- 0xD1, 0x00,
- 0xCE, 0x00,
- 0xCC, 0x00,
- 0xE0, 0x00,
- 0xE2, 0x01
- };
- u8 param[4];
-
- if (byd_send_sequence(psmouse, seq1, ARRAY_SIZE(seq1)))
- return -1;
-
- /* Send a 0x01 command, which should return 4 bytes. */
- if (ps2_command(&psmouse->ps2dev, param, 0x0401))
- return -1;
-
- if (byd_send_sequence(psmouse, seq2, ARRAY_SIZE(seq2)))
- return -1;
-
- return 0;
+ return PSMOUSE_FULL_PACKET;
}
-/*
- * Send the set of PS/2 commands required to make it identify as an
- * intellimouse with 4-byte instead of 3-byte packets.
- */
-static int byd_send_intellimouse_sequence(struct psmouse *psmouse)
+static int byd_reset_touchpad(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
u8 param[4];
- int i;
+ size_t i;
+
const struct {
u16 command;
u8 arg;
} seq[] = {
- { PSMOUSE_CMD_RESET_BAT, 0 },
- { PSMOUSE_CMD_RESET_BAT, 0 },
- { PSMOUSE_CMD_GETID, 0 },
- { PSMOUSE_CMD_SETSCALE11, 0 },
- { PSMOUSE_CMD_SETSCALE11, 0 },
- { PSMOUSE_CMD_SETSCALE11, 0 },
- { PSMOUSE_CMD_GETINFO, 0 },
- { PSMOUSE_CMD_SETRES, 0x03 },
+ /*
+ * Intellimouse initialization sequence, to get 4-byte instead
+ * of 3-byte packets.
+ */
{ PSMOUSE_CMD_SETRATE, 0xC8 },
{ PSMOUSE_CMD_SETRATE, 0x64 },
{ PSMOUSE_CMD_SETRATE, 0x50 },
{ PSMOUSE_CMD_GETID, 0 },
- { PSMOUSE_CMD_SETRATE, 0xC8 },
- { PSMOUSE_CMD_SETRATE, 0xC8 },
- { PSMOUSE_CMD_SETRATE, 0x50 },
- { PSMOUSE_CMD_GETID, 0 },
- { PSMOUSE_CMD_SETRATE, 0x64 },
- { PSMOUSE_CMD_SETRES, 0x03 },
- { PSMOUSE_CMD_ENABLE, 0 }
+ { PSMOUSE_CMD_ENABLE, 0 },
+ /*
+ * BYD-specific initialization, which enables absolute mode and
+ * (if desired), the touchpad's built-in gesture detection.
+ */
+ { 0x10E2, 0x00 },
+ { 0x10E0, 0x02 },
+ /* The touchpad should reply with 4 seemingly-random bytes */
+ { 0x14E0, 0x01 },
+ /* Pairs of parameters and values. */
+ { BYD_CMD_SET_HANDEDNESS, 0x01 },
+ { BYD_CMD_SET_PHYSICAL_BUTTONS, 0x04 },
+ { BYD_CMD_SET_TAP, 0x02 },
+ { BYD_CMD_SET_ONE_FINGER_SCROLL, 0x04 },
+ { BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC, 0x04 },
+ { BYD_CMD_SET_EDGE_MOTION, 0x01 },
+ { BYD_CMD_SET_PALM_CHECK, 0x00 },
+ { BYD_CMD_SET_MULTITOUCH, 0x02 },
+ { BYD_CMD_SET_TWO_FINGER_SCROLL, 0x04 },
+ { BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC, 0x04 },
+ { BYD_CMD_SET_LEFT_EDGE_REGION, 0x00 },
+ { BYD_CMD_SET_TOP_EDGE_REGION, 0x00 },
+ { BYD_CMD_SET_RIGHT_EDGE_REGION, 0x00 },
+ { BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00 },
+ { BYD_CMD_SET_ABSOLUTE_MODE, 0x02 },
+ /* Finalize initialization. */
+ { 0x10E0, 0x00 },
+ { 0x10E2, 0x01 },
};
- memset(param, 0, sizeof(param));
for (i = 0; i < ARRAY_SIZE(seq); ++i) {
+ memset(param, 0, sizeof(param));
param[0] = seq[i].arg;
if (ps2_command(ps2dev, param, seq[i].command))
- return -1;
+ return -EIO;
}
- return 0;
-}
-
-static int byd_reset_touchpad(struct psmouse *psmouse)
-{
- if (byd_send_intellimouse_sequence(psmouse))
- return -EIO;
-
- if (byd_enable(psmouse))
- return -EIO;
-
+ psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
return 0;
}
return 0;
}
+static void byd_disconnect(struct psmouse *psmouse)
+{
+ struct byd_data *priv = psmouse->private;
+
+ if (priv) {
+ del_timer(&priv->timer);
+ kfree(psmouse->private);
+ psmouse->private = NULL;
+ }
+}
+
+int byd_detect(struct psmouse *psmouse, bool set_properties)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ u8 param[4] = {0x03, 0x00, 0x00, 0x00};
+
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
+ return -1;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
+ return -1;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
+ return -1;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
+ return -1;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ return -1;
+
+ if (param[1] != 0x03 || param[2] != 0x64)
+ return -ENODEV;
+
+ psmouse_dbg(psmouse, "BYD touchpad detected\n");
+
+ if (set_properties) {
+ psmouse->vendor = "BYD";
+ psmouse->name = "TouchPad";
+ }
+
+ return 0;
+}
+
int byd_init(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
+ struct byd_data *priv;
if (psmouse_reset(psmouse))
return -EIO;
if (byd_reset_touchpad(psmouse))
return -EIO;
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ memset(priv, 0, sizeof(*priv));
+ setup_timer(&priv->timer, byd_clear_touch, (unsigned long) psmouse);
+
+ psmouse->private = priv;
+ psmouse->disconnect = byd_disconnect;
psmouse->reconnect = byd_reconnect;
psmouse->protocol_handler = byd_process_byte;
psmouse->pktsize = 4;
psmouse->resync_time = 0;
- __set_bit(BTN_MIDDLE, dev->keybit);
- __set_bit(REL_WHEEL, dev->relbit);
- __set_bit(REL_HWHEEL, dev->relbit);
+ __set_bit(INPUT_PROP_POINTER, dev->propbit);
+ /* Touchpad */
+ __set_bit(BTN_TOUCH, dev->keybit);
+ __set_bit(BTN_TOOL_FINGER, dev->keybit);
+ /* Buttons */
+ __set_bit(BTN_LEFT, dev->keybit);
+ __set_bit(BTN_RIGHT, dev->keybit);
+ __clear_bit(BTN_MIDDLE, dev->keybit);
+
+ /* Absolute position */
+ __set_bit(EV_ABS, dev->evbit);
+ input_set_abs_params(dev, ABS_X, 0, BYD_PAD_WIDTH, 0, 0);
+ input_set_abs_params(dev, ABS_Y, 0, BYD_PAD_HEIGHT, 0, 0);
+ input_abs_set_res(dev, ABS_X, BYD_PAD_RESOLUTION);
+ input_abs_set_res(dev, ABS_Y, BYD_PAD_RESOLUTION);
+ /* No relative support */
+ __clear_bit(EV_REL, dev->evbit);
+ __clear_bit(REL_X, dev->relbit);
+ __clear_bit(REL_Y, dev->relbit);
return 0;
}
projects / platform / kernel / linux-rpi3.git / commitdiff