}
/**
+ * update_crc - update the CRC
+ *
+ * This function should be called after each update to the EEPROM structure,
+ * to make sure the CRC is always correct.
+ */
+static void update_crc(void)
+{
+ u32 crc;
+
+ crc = crc32(0, (void *)&e, sizeof(e) - 4);
+ e.crc = cpu_to_be32(crc);
+}
+
+/**
* prog_eeprom - write the EEPROM from memory
*/
static int prog_eeprom(void)
{
- int ret, i, length;
- unsigned int crc;
+ int ret, i;
void *p;
#ifdef CONFIG_SYS_EEPROM_BUS_NUM
unsigned int bus;
#else
memset(e.res_0, 0xFF, sizeof(e.res_0));
#endif
-
- length = sizeof(e);
- crc = crc32(0, (void *)&e, length - 4);
- e.crc = cpu_to_be32(crc);
+ update_crc();
#ifdef CONFIG_SYS_EEPROM_BUS_NUM
bus = i2c_get_bus_num();
i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
#endif
- for (i = 0, p = &e; i < length; i += 8, p += 8) {
+ for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) {
ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
- p, min((length - i), 8));
+ p, min((sizeof(e) - i), 8));
if (ret)
break;
udelay(5000); /* 5ms write cycle timing */
for (i = 0; i < 6; i++)
e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]);
+
+ update_crc();
}
/**
if (*p == ':')
p++;
}
+
+ update_crc();
}
int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- int i;
char cmd;
if (argc == 1) {
return 0;
}
- if ((cmd == 'i') && (argc > 2)) {
- for (i = 0; i < 4; i++)
- e.id[i] = argv[2][i];
+ if (cmd == 'i') {
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
+ memcpy(e.id, "NXID", sizeof(e.id));
+ e.version = 0;
+#else
+ memcpy(e.id, "CCID", sizeof(e.id));
+#endif
return 0;
}
case 'n': /* serial number */
memset(e.sn, 0, sizeof(e.sn));
strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1);
+ update_crc();
break;
case 'e': /* errata */
#ifdef CONFIG_SYS_I2C_EEPROM_NXID
e.errata[0] = argv[2][0];
e.errata[1] = argv[2][1];
#endif
+ update_crc();
break;
case 'd': /* date BCD format YYMMDDhhmmss */
set_date(argv[2]);
break;
case 'p': /* MAC table size */
e.mac_count = simple_strtoul(argv[2], NULL, 16);
+ update_crc();
break;
case '0' ... '7': /* "mac 0" through "mac 7" */
set_mac_address(cmd - '0', argv[2]);
int mac_read_from_eeprom(void)
{
unsigned int i;
+ u32 crc;
+
+ puts("EEPROM: ");
if (read_eeprom()) {
printf("Read failed.\n");
}
if (!is_valid) {
- printf("Invalid ID (%02x %02x %02x %02x)\n", e.id[0], e.id[1], e.id[2], e.id[3]);
+ printf("Invalid ID (%02x %02x %02x %02x)\n",
+ e.id[0], e.id[1], e.id[2], e.id[3]);
return -1;
}
- if (be32_to_cpu(e.crc) != 0xFFFFFFFF) {
- u32 crc = crc32(0, (void *)&e, sizeof(e) - 4);
-
- if (crc != be32_to_cpu(e.crc)) {
- printf("CRC mismatch (%08x != %08x).\n", crc,
- be32_to_cpu(e.crc));
- return -1;
- }
- }
-
- /* Check the number of MAC addresses which is limited to
- * MAX_NUM_PORTS.
- */
- if (e.mac_count > MAX_NUM_PORTS) {
- printf("Warning: The number of MAC addresses is greater"
- " than %u, force it to %u.\n", MAX_NUM_PORTS,
- MAX_NUM_PORTS);
- e.mac_count = MAX_NUM_PORTS;
+ crc = crc32(0, (void *)&e, sizeof(e) - 4);
+ if (crc != be32_to_cpu(e.crc)) {
+ printf("CRC mismatch (%08x != %08x)\n", crc, be32_to_cpu(e.crc));
+ return -1;
}
- for (i = 0; i < e.mac_count; i++) {
+ for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) {
if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) &&
memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
char ethaddr[18];
}
}
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
+ printf("%c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3],
+ be32_to_cpu(e.version));
+#else
+ printf("%c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]);
+#endif
+
return 0;
}