ARM: Kirkwood: Use DT to configure SATA device.

Convert boards using DT, but the old way of configuring SATA to now
use properties in there DT file.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>

diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index 9a33077..6fb0d7e 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -26,6 +26,11 @@
                        status = "okay";
                };
 
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <2>;
+               };
+
                nand@3000000 {
                        status = "okay";
 

diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index 16734c1..17895d9 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -21,6 +21,11 @@
                        status = "okay";
                };
 
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <2>;
+               };
+
                nand@3000000 {
                        status = "okay";
 

diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index ab8a855..d64ff7d 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -48,6 +48,11 @@
                                };
                        };
                };
+
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <1>;
+               };
        };
 
 };

diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index f59dcf6..f7b9580 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -21,6 +21,11 @@
                        status = "okay";
                };
 
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <2>;
+               };
+
                nand@3000000 {
                        status = "okay";
 

diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 7b3f961..b4a789a 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -70,5 +70,9 @@
                                };
                        };
                };
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <2>;
+               };
        };
 };

diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 58c2d68..179f4b3 100644 (file)
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -35,10 +35,6 @@ static struct mv643xx_eth_platform_data dnskw_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
 };
 
-static struct mv_sata_platform_data dnskw_sata_data = {
-       .n_ports        = 2,
-};
-
 static unsigned int dnskw_mpp_config[] __initdata = {
        MPP13_UART1_TXD,        /* Custom ... */
        MPP14_UART1_RXD,        /* ... Controller (DNS-320 only) */
@@ -245,7 +241,6 @@ void __init dnskw_init(void)
 
        kirkwood_ehci_init();
        kirkwood_ge00_init(&dnskw_ge00_data);
-       kirkwood_sata_init(&dnskw_sata_data);
        kirkwood_i2c_init();
 
        platform_device_register(&dnskw_button_device);

diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index eb0e4d5..e494393 100644 (file)
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -43,10 +43,6 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
 };
 
-static struct mv_sata_platform_data dreamplug_sata_data = {
-       .n_ports        = 1,
-};
-
 static struct mvsdio_platform_data dreamplug_mvsdio_data = {
        /* unfortunately the CD signal has not been connected */
 };
@@ -103,7 +99,6 @@ void __init dreamplug_init(void)
        kirkwood_ehci_init();
        kirkwood_ge00_init(&dreamplug_ge00_data);
        kirkwood_ge01_init(&dreamplug_ge01_data);
-       kirkwood_sata_init(&dreamplug_sata_data);
        kirkwood_sdio_init(&dreamplug_mvsdio_data);
 
        platform_device_register(&dreamplug_leds);

diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index eddf1df..56d198e 100644 (file)
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -33,10 +33,6 @@ static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
 };
 
-static struct mv_sata_platform_data ib62x0_sata_data = {
-       .n_ports        = 2,
-};
-
 static unsigned int ib62x0_mpp_config[] __initdata = {
        MPP0_NF_IO2,
        MPP1_NF_IO3,
@@ -132,7 +128,6 @@ void __init ib62x0_init(void)
 
        kirkwood_ehci_init();
        kirkwood_ge00_init(&ib62x0_ge00_data);
-       kirkwood_sata_init(&ib62x0_sata_data);
        platform_device_register(&ib62x0_led_device);
        platform_device_register(&ib62x0_button_device);
        if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&

diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index 00b79ea..1750e68 100644 (file)
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -33,10 +33,6 @@ static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
 };
 
-static struct mv_sata_platform_data qnap_ts219_sata_data = {
-       .n_ports        = 2,
-};
-
 static unsigned int qnap_ts219_mpp_config[] __initdata = {
        MPP0_SPI_SCn,
        MPP1_SPI_MOSI,
@@ -70,7 +66,6 @@ void __init qnap_dt_ts219_init(void)
                qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
 
        kirkwood_ge00_init(&qnap_ts219_ge00_data);
-       kirkwood_sata_init(&qnap_ts219_sata_data);
        kirkwood_ehci_init();
 
        pm_power_off = qnap_tsx1x_power_off;