ARM: dts: uniphier: route on-board device IRQ to GPIO controller

Interrupt lines from on-board devices are connected to the GPIO
controller.  Handle this correctly.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index b3aaab3..148e7bb 100644 (file)
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -38,7 +38,7 @@
 };
 
 &ethsc {
-       interrupts = <0 49 4>;
+       interrupts = <1 8>;
 };
 
 &serial0 {

diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 2188d11..ec2a098 100644 (file)
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -40,7 +40,7 @@
 };
 
 &ethsc {
-       interrupts = <0 52 4>;
+       interrupts = <4 8>;
 };
 
 &serial0 {

diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 903df63..7316cc6 100644 (file)
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -40,7 +40,7 @@
 };
 
 &ethsc {
-       interrupts = <0 50 4>;
+       interrupts = <2 8>;
 };
 
 &serial0 {

diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index 5accd3c..4ec48a1 100644 (file)
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -38,7 +38,7 @@
 };
 
 &ethsc {
-       interrupts = <0 48 4>;
+       interrupts = <0 8>;
 };
 
 &serial0 {

diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
index 7751511..e4e7e1b 100644 (file)
--- a/arch/arm/boot/dts/uniphier-support-card.dtsi
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -16,6 +16,7 @@
                #address-cells = <1>;
                #size-cells = <1>;
                ranges = <0x00000000 1 0x01f00000 0x00100000>;
+               interrupt-parent = <&gpio>;
 
                ethsc: ethernet@0 {
                        compatible = "smsc,lan9118", "smsc,lan9115";