Input: bu21013_ts - use local 'client->dev' variable in probe()

'dev' is shorter and simpler than '&client->dev' and in few cases it
allows to skip line wrapping. Probe function uses '&client->dev' a lot,
so this improves readability slightly.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230625162817.100397-24-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index f811677a59f7a844aee29b291872aed1a499d643..652439a79e216d8e67ffae5033fd5dd9929af992 100644 (file)
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -410,31 +410,32 @@ static int bu21013_probe(struct i2c_client *client)
        struct input_dev *in_dev;
        struct input_absinfo *info;
        u32 max_x = 0, max_y = 0;
+       struct device *dev = &client->dev;
        int error;
 
        if (!i2c_check_functionality(client->adapter,
                                     I2C_FUNC_SMBUS_BYTE_DATA)) {
-               dev_err(&client->dev, "i2c smbus byte data not supported\n");
+               dev_err(dev, "i2c smbus byte data not supported\n");
                return -EIO;
        }
 
        if (!client->irq) {
-               dev_err(&client->dev, "No IRQ set up\n");
+               dev_err(dev, "No IRQ set up\n");
                return -EINVAL;
        }
 
-       ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+       ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
        if (!ts)
                return -ENOMEM;
 
        ts->client = client;
 
-       ts->x_flip = device_property_read_bool(&client->dev, "rohm,flip-x");
-       ts->y_flip = device_property_read_bool(&client->dev, "rohm,flip-y");
+       ts->x_flip = device_property_read_bool(dev, "rohm,flip-x");
+       ts->y_flip = device_property_read_bool(dev, "rohm,flip-y");
 
-       in_dev = devm_input_allocate_device(&client->dev);
+       in_dev = devm_input_allocate_device(dev);
        if (!in_dev) {
-               dev_err(&client->dev, "device memory alloc failed\n");
+               dev_err(dev, "device memory alloc failed\n");
                return -ENOMEM;
        }
        ts->in_dev = in_dev;
@@ -444,8 +445,8 @@ static int bu21013_probe(struct i2c_client *client)
        in_dev->name = DRIVER_TP;
        in_dev->id.bustype = BUS_I2C;
 
-       device_property_read_u32(&client->dev, "rohm,touch-max-x", &max_x);
-       device_property_read_u32(&client->dev, "rohm,touch-max-y", &max_y);
+       device_property_read_u32(dev, "rohm,touch-max-x", &max_x);
+       device_property_read_u32(dev, "rohm,touch-max-y", &max_y);
 
        input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0, max_x, 0, 0);
        input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
@@ -454,14 +455,14 @@ static int bu21013_probe(struct i2c_client *client)
 
        /* Adjust for the legacy "flip" properties, if present */
        if (!ts->props.invert_x &&
-           device_property_read_bool(&client->dev, "rohm,flip-x")) {
+           device_property_read_bool(dev, "rohm,flip-x")) {
                info = &in_dev->absinfo[ABS_MT_POSITION_X];
                info->maximum -= info->minimum;
                info->minimum = 0;
        }
 
        if (!ts->props.invert_y &&
-           device_property_read_bool(&client->dev, "rohm,flip-y")) {
+           device_property_read_bool(dev, "rohm,flip-y")) {
                info = &in_dev->absinfo[ABS_MT_POSITION_Y];
                info->maximum -= info->minimum;
                info->minimum = 0;
@@ -471,50 +472,46 @@ static int bu21013_probe(struct i2c_client *client)
                                    INPUT_MT_DIRECT | INPUT_MT_TRACK |
                                        INPUT_MT_DROP_UNUSED);
        if (error) {
-               dev_err(&client->dev, "failed to initialize MT slots");
+               dev_err(dev, "failed to initialize MT slots");
                return error;
        }
 
-       ts->regulator = devm_regulator_get(&client->dev, "avdd");
+       ts->regulator = devm_regulator_get(dev, "avdd");
        if (IS_ERR(ts->regulator)) {
-               dev_err(&client->dev, "regulator_get failed\n");
+               dev_err(dev, "regulator_get failed\n");
                return PTR_ERR(ts->regulator);
        }
 
        error = regulator_enable(ts->regulator);
        if (error) {
-               dev_err(&client->dev, "regulator enable failed\n");
+               dev_err(dev, "regulator enable failed\n");
                return error;
        }
 
-       error = devm_add_action_or_reset(&client->dev, bu21013_power_off, ts);
+       error = devm_add_action_or_reset(dev, bu21013_power_off, ts);
        if (error) {
-               dev_err(&client->dev, "failed to install power off handler\n");
+               dev_err(dev, "failed to install power off handler\n");
                return error;
        }
 
        /* Named "CS" on the chip, DT binding is "reset" */
-       ts->cs_gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
+       ts->cs_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
        if (IS_ERR(ts->cs_gpiod))
-               return dev_err_probe(&client->dev, PTR_ERR(ts->cs_gpiod),
-                                    "failed to get CS GPIO\n");
+               return dev_err_probe(dev, PTR_ERR(ts->cs_gpiod), "failed to get CS GPIO\n");
 
        gpiod_set_consumer_name(ts->cs_gpiod, "BU21013 CS");
 
-       error = devm_add_action_or_reset(&client->dev,
-                                        bu21013_disable_chip, ts);
+       error = devm_add_action_or_reset(dev, bu21013_disable_chip, ts);
        if (error) {
-               dev_err(&client->dev,
-                       "failed to install chip disable handler\n");
+               dev_err(dev, "failed to install chip disable handler\n");
                return error;
        }
 
        /* Named "INT" on the chip, DT binding is "touch" */
-       ts->int_gpiod = devm_gpiod_get_optional(&client->dev,
-                                               "touch", GPIOD_IN);
+       ts->int_gpiod = devm_gpiod_get_optional(dev, "touch", GPIOD_IN);
        error = PTR_ERR_OR_ZERO(ts->int_gpiod);
        if (error)
-               return dev_err_probe(&client->dev, error, "failed to get INT GPIO\n");
+               return dev_err_probe(dev, error, "failed to get INT GPIO\n");
 
        if (ts->int_gpiod)
                gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
@@ -522,22 +519,20 @@ static int bu21013_probe(struct i2c_client *client)
        /* configure the touch panel controller */
        error = bu21013_init_chip(ts);
        if (error) {
-               dev_err(&client->dev, "error in bu21013 config\n");
+               dev_err(dev, "error in bu21013 config\n");
                return error;
        }
 
-       error = devm_request_threaded_irq(&client->dev, client->irq,
-                                         NULL, bu21013_gpio_irq,
+       error = devm_request_threaded_irq(dev, client->irq, NULL, bu21013_gpio_irq,
                                          IRQF_ONESHOT, DRIVER_TP, ts);
        if (error) {
-               dev_err(&client->dev, "request irq %d failed\n",
-                       client->irq);
+               dev_err(dev, "request irq %d failed\n", client->irq);
                return error;
        }
 
        error = input_register_device(in_dev);
        if (error) {
-               dev_err(&client->dev, "failed to register input device\n");
+               dev_err(dev, "failed to register input device\n");
                return error;
        }