These aren't necessary after switch and if blocks.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
case HUB_LED_OFF: s = "off"; break;
case HUB_LED_AUTO: s = "auto"; break;
default: s = "??"; break;
- }; s; }),
+ } s; }),
status);
}
break;
default:
return -EINVAL;
- };
+ }
response_pkt = (__le16 *) dwc->setup_buf;
*response_pkt = cpu_to_le16(usb_status);
default:
return -EINVAL;
- };
+ }
return 0;
}
dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
ret = dwc3_ep0_delegate_req(dwc, ctrl);
break;
- };
+ }
return ret;
}
return DIV_ROUND_UP(val, 8);
default:
return DIV_ROUND_UP(val, 2);
- };
+ }
}
static int config_buf(struct usb_configuration *config,
default:
val = "ctrl";
break;
- }; val; }),
+ } val; }),
max, ep->stream_en ? "enabled" : "disabled");
/* at this point real hardware should be NAKing transfers
default:
s = "?";
break;
- }; s; }),
+ } s; }),
ep, ep ? (usb_pipein(urb->pipe) ? "in" : "out") : "",
({ char *s; \
switch (usb_pipetype(urb->pipe)) { \
default: \
s = "-iso"; \
break; \
- }; s; }),
+ } s; }),
urb->actual_length, urb->transfer_buffer_length);
}
s = "invalid"; break;
default:
s = "?"; break;
- }; s; }),
+ } s; }),
(tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
(tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
(tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
case USB_ENDPOINT_XFER_BULK: return "bulk";
case USB_ENDPOINT_XFER_ISOC: return "iso";
case USB_ENDPOINT_XFER_INT: return "intr";
- };
+ }
return "control";
}
#endif
val = "intr"; break;
default:
val = "iso"; break;
- }; val; }),
+ } val; }),
usb_endpoint_maxp (d) & 0x1fff,
ep->dma ? "dma" : "pio", ep->fifo_size
);
s = "RNDIS_INITIALIZED"; break;
case RNDIS_DATA_INITIALIZED:
s = "RNDIS_DATA_INITIALIZED"; break;
- }; s; }),
+ } s; }),
param->medium,
(param->media_state) ? 0 : param->speed*100,
(param->media_state) ? "disconnected" : "connected",
bot_enqueue_cmd_cbw(fu);
return 0;
break;
- };
+ }
return -ENOTSUPP;
}
default:
BUG();
- };
+ }
return;
cleanup:
case QH_LOW_SPEED: tmp = 'l'; break; \
case QH_HIGH_SPEED: tmp = 'h'; break; \
default: tmp = '?'; break; \
- }; tmp; })
+ } tmp; })
static inline char token_mark(struct ehci_hcd *ehci, __hc32 token)
{
tmp = 'h'; break; \
default: \
tmp = '?'; break; \
- }; tmp; })
+ } tmp; })
static inline char token_mark(struct fotg210_hcd *fotg210, __hc32 token)
{
case QH_LOW_SPEED: tmp = 'l'; break; \
case QH_HIGH_SPEED: tmp = 'h'; break; \
default: tmp = '?'; break; \
- }; tmp; })
+ } tmp; })
static inline char token_mark(struct fusbh200_hcd *fusbh200, __hc32 token)
{
default:
s = "?";
break;
- };
+ }
s;}), ep->maxpacket) ;
list_for_each_entry(urb, &ep->hep->urb_list, urb_list) {
seq_printf(s, " urb%p, %d/%d\n", urb,
case PIPE_BULK: temp = "bulk"; break; \
case PIPE_INTERRUPT: temp = "intr"; break; \
default: temp = "isoc"; break; \
- }; temp;})
+ } temp;})
#define pipestring(pipe) edstring(usb_pipetype(pipe))
/* debug| print the main components of an URB
case SL11H_CTL1MASK_SE0: s = " se0/reset"; break;
case SL11H_CTL1MASK_K: s = " k/resume"; break;
default: s = "j"; break;
- }; s; }),
+ } s; }),
(t & SL11H_CTL1MASK_LSPD) ? " lowspeed" : "",
(t & SL11H_CTL1MASK_SUSPEND) ? " suspend" : "");
case USB_PID_SETUP: s = "setup"; break;
case USB_PID_ACK: s = "status"; break;
default: s = "?"; break;
- }; s;}),
+ } s;}),
ep->maxpacket,
ep->nak_count, ep->error_count);
list_for_each_entry (urb, &ep->hep->urb_list, urb_list) {
dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
rc = -EBUSY;
goto done;
- };
+ }
/* All PCI host controllers are required to disable IRQ generation
* at the source, so we must turn off PIRQ.
default:
ret = asl_urb_enqueue(whc, urb, mem_flags);
break;
- };
+ }
return ret;
}
default:
ret = asl_urb_dequeue(whc, urb, status);
break;
- };
+ }
return ret;
}
/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
default:
s = "VALID"; break;
- }; s; }),
+ } s; }),
VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
musb->port1_status);
case USB_DR_MODE_OTG:
default:
return MUSB_PORT_MODE_DUAL_ROLE;
- };
+ }
}
static int dsps_create_musb_pdev(struct dsps_glue *glue,
case USB_ENDPOINT_XFER_BULK: s = "bulk"; break;
case USB_ENDPOINT_XFER_INT: s = "int"; break;
default: s = "iso"; break;
- }; s; }),
+ } s; }),
musb_ep->is_in ? "IN" : "OUT",
musb_ep->dma ? "dma, " : "",
musb_ep->packet_sz);
case USB_ENDPOINT_XFER_BULK: s = "-bulk"; break;
case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
default: s = "-intr"; break;
- }; s; }),
+ } s; }),
epnum, buf + offset, len);
/* Configure endpoint */
return 0;
udelay(1);
- };
+ }
return -ETIMEDOUT;
}
ar_name = "ASSOCIATE";
ar_assoc = 1;
break;
- };
+ }
break;
- };
+ }
dev_dbg(dev, "Association request #%02u: 0x%04x/%04x "
"(%zu bytes): %s\n",
default:
WARN_ON(1);
result = NOTIFY_BAD;
- };
+ }
return result;
}
projects / profile / ivi / kernel-x86-ivi.git / commitdiff