[media] dvb_pll: DVB-S incorrect tune settings for dw2102/dm1105/cx88/opera1

This tuner PLL has missing initialisation settings resulting in
haphazard tuning. The PLL LPF was set to just 22000 symbol rate.

Basically, the module is a Sharp BS2F7HZ0194 (STV0299+IX2410)

I have had problems implementing the PLL in a new driver and
did not want to break the IX2410 out of the PLL.

This applies to DW2102, DM1105, CX88 and OPERA1 drivers.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 4d4d0bb..62a65ef 100644 (file)
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -64,6 +64,7 @@ struct dvb_pll_desc {
        void (*set)(struct dvb_frontend *fe, u8 *buf,
                    const struct dvb_frontend_parameters *params);
        u8   *initdata;
+       u8   *initdata2;
        u8   *sleepdata;
        int  count;
        struct {
@@ -321,26 +322,73 @@ static struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261 = {
 static void opera1_bw(struct dvb_frontend *fe, u8 *buf,
                      const struct dvb_frontend_parameters *params)
 {
-       if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ)
-               buf[2] |= 0x08;
+       struct dvb_pll_priv *priv = fe->tuner_priv;
+       u32 b_w  = (params->u.qpsk.symbol_rate * 27) / 32000;
+       struct i2c_msg msg = {
+               .addr = priv->pll_i2c_address,
+               .flags = 0,
+               .buf = buf,
+               .len = 4
+       };
+       int result;
+       u8 lpf;
+
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+
+       result = i2c_transfer(priv->i2c, &msg, 1);
+       if (result != 1)
+               printk(KERN_ERR "%s: i2c_transfer failed:%d",
+                       __func__, result);
+
+       if (b_w <= 10000)
+               lpf = 0xc;
+       else if (b_w <= 12000)
+               lpf = 0x2;
+       else if (b_w <= 14000)
+               lpf = 0xa;
+       else if (b_w <= 16000)
+               lpf = 0x6;
+       else if (b_w <= 18000)
+               lpf = 0xe;
+       else if (b_w <= 20000)
+               lpf = 0x1;
+       else if (b_w <= 22000)
+               lpf = 0x9;
+       else if (b_w <= 24000)
+               lpf = 0x5;
+       else if (b_w <= 26000)
+               lpf = 0xd;
+       else if (b_w <= 28000)
+               lpf = 0x3;
+               else
+               lpf = 0xb;
+       buf[2] ^= 0x1c; /* Flip bits 3-5 */
+       /* Set lpf */
+       buf[2] |= ((lpf >> 2) & 0x3) << 3;
+       buf[3] |= (lpf & 0x3) << 2;
+
+       return;
 }
 
 static struct dvb_pll_desc dvb_pll_opera1 = {
        .name  = "Opera Tuner",
        .min   =  900000,
        .max   = 2250000,
+       .initdata = (u8[]){ 4, 0x08, 0xe5, 0xe1, 0x00 },
+       .initdata2 = (u8[]){ 4, 0x08, 0xe5, 0xe5, 0x00 },
        .iffreq= 0,
        .set   = opera1_bw,
        .count = 8,
        .entries = {
-               { 1064000, 500, 0xe5, 0xc6 },
-               { 1169000, 500, 0xe5, 0xe6 },
-               { 1299000, 500, 0xe5, 0x24 },
-               { 1444000, 500, 0xe5, 0x44 },
-               { 1606000, 500, 0xe5, 0x64 },
-               { 1777000, 500, 0xe5, 0x84 },
-               { 1941000, 500, 0xe5, 0xa4 },
-               { 2250000, 500, 0xe5, 0xc4 },
+               { 1064000, 500, 0xf9, 0xc2 },
+               { 1169000, 500, 0xf9, 0xe2 },
+               { 1299000, 500, 0xf9, 0x20 },
+               { 1444000, 500, 0xf9, 0x40 },
+               { 1606000, 500, 0xf9, 0x60 },
+               { 1777000, 500, 0xf9, 0x80 },
+               { 1941000, 500, 0xf9, 0xa0 },
+               { 2250000, 500, 0xf9, 0xc0 },
        }
 };
 
@@ -648,8 +696,17 @@ static int dvb_pll_init(struct dvb_frontend *fe)
                int result;
                if (fe->ops.i2c_gate_ctrl)
                        fe->ops.i2c_gate_ctrl(fe, 1);
-               if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
+               result = i2c_transfer(priv->i2c, &msg, 1);
+               if (result != 1)
                        return result;
+               if (priv->pll_desc->initdata2) {
+                       msg.buf = priv->pll_desc->initdata2 + 1;
+                       msg.len = priv->pll_desc->initdata2[0];
+                       if (fe->ops.i2c_gate_ctrl)
+                               fe->ops.i2c_gate_ctrl(fe, 1);
+                       result = i2c_transfer(priv->i2c, &msg, 1);
+                       if (result != 1)
+                               return result;
                }
                return 0;
        }