* MA 02111-1307 USA
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __ARTIK10_H
+#define __ARTIK10_H
/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
-#define CONFIG_ARCH_EXYNOS /* which is in a Exynos Family */
+#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
#define CONFIG_ARCH_EXYNOS5 /* which is in a Exynos5 Family */
#define CONFIG_CPU_EXYNOS5420 /* which is in a Exynos5420 */
#define CONFIG_CPU_EXYNOS5422 /* which is in a Exynos5422 */
#define CONFIG_CPU_EXYNOS5422_EVT0 /* which is in a Exynos5422 EVT0 */
#define CONFIG_MACH_ARTIK10 /* which is in a ARTIK10 */
+#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5422
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#include <configs/artik_common.h>
/* TRUSTZONE */
-#define CONFIG_TRUSTZONE_ENABLE
-#ifdef CONFIG_TRUSTZONE_ENABLE
-#undef CONFIG_TZPC
-#define CONFIG_SMC_CMD
#define CONFIG_TRUSTZONE_RESERVED_DRAM 0x1600000
-#else
-#define CONFIG_TRUSTZONE_RESERVED_DRAM 0x0
-#define CONFIG_TZPC
-#undef CONFIG_SMC_CMD
-#endif
-
-/* Configuration of bl1 partition size */
-#define CONFIG_BL_MONITOR
-/* Configuration of secure boot */
-#undef CONFIG_UBOOT_SECURE_BOOT
-#undef CONFIG_TZSW_SECURE_BOOT
-#undef CONFIG_SECURE_BOOT
-
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_UBOOT_SECURE_BOOT
-#define CONFIG_TZSW_SECURE_BOOT
-#define CONFIG_SECURE_ROOTFS
-#define CONFIG_SECURE_KERNEL_SIZE 0x400000
-#define CONFIG_SECURE_ROOTFS_SIZE 0x100000
-#ifdef CONFIG_CPU_EXYNOS5422_EVT0
-#define CONFIG_SECURE_KERNEL_BASE 0x40008000
-#define CONFIG_SECURE_ROOTFS_BASE 0x41000000
-#else
-#define CONFIG_SECURE_KERNEL_BASE 0x20008000
-#define CONFIG_SECURE_ROOTFS_BASE 0x21000000
-#endif
-#endif
+#define CONFIG_SPL_TEXT_BASE 0x02027000
+#define CONFIG_PHY_IRAM_BASE (0x02020000)
+#define CONFIG_PHY_IRAM_NS_BASE (CONFIG_PHY_IRAM_BASE + 0x53000)
/* Power Management is enabled */
#define CONFIG_PM
#define CONFIG_PM_VDD_G3D 1.00
#define CONFIG_PM_VDD_MIF 1.10
-/* Bootloader Recovery */
-#define CONFIG_RECOVERY_MODE
-
-/* RAMDUMP MODE */
-#define CONFIG_RAMDUMP_MODE 0xD
-
-/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_DCACHE_OFF
-
-#ifdef CONFIG_CPU_EXYNOS5422_EVT0
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#else
-#define CONFIG_SYS_SDRAM_BASE 0x20000000
-#endif
-#define CONFIG_SYS_TEXT_BASE 0x43E00000
-#define CONFIG_SPL_TEXT_BASE 0x02027000
-
-/* input clock of PLL: SMDK5422 has 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5422
-
-/* iRAM information */
-#define CONFIG_PHY_IRAM_BASE (0x02020000)
-#define CONFIG_PHY_IRAM_NS_BASE (CONFIG_PHY_IRAM_BASE + 0x53000)
-
-/* Power Down Modes */
-#define S5P_CHECK_SLEEP 0x00000BAD
-#define S5P_CHECK_DIDLE 0xBAD00000
-#define S5P_CHECK_LPA 0xABAD0000
-
-/* Offset for OM status registers */
-#define OM_STATUS_OFFSET 0x0
-
-/* Offset for inform registers */
-#define INFORM0_OFFSET 0x800
-#define INFORM1_OFFSET 0x804
-#define INFORM2_OFFSET 0x808
-#define INFORM3_OFFSET 0x80C
-#define INFORM4_OFFSET 0x810
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
-
/* select serial console configuration */
-#define CONFIG_SERIAL_MULTI
#define CONFIG_SERIAL3 /* use SERIAL 3 */
-#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
-#define TZPC_BASE_OFFSET 0x10000
-
/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_MSHC
-#define CONFIG_S5P_SDHCI
#define CONFIG_MMC_64BIT_BUS
-#if defined(CONFIG_S5P_MSHC)
-#define CONFIG_MMC_SMU_INIT
-#define CONFIG_MMC_EARLY_INIT
-#define MMC_MAX_CHANNEL 4
-#define USE_MMC0
-#define USE_MMC2
-
-#define PHASE_DEVIDER 4
-
#define SDR_CH0 0x03030003
#define DDR_CH0 0x03020001
-
#define SDR_CH2 0x03020001
#define DDR_CH2 0x03030002
-#define SDR_CH4 0x0
-#define DDR_CH4 0x0
-#endif
-
-/*
- * Boot configuration
- */
-#define BOOT_ONENAND 0x1
-#define BOOT_NAND 0x40000
-#define BOOT_MMCSD 0x3
-#define BOOT_NOR 0x4
-#define BOOT_SEC_DEV 0x5
-#define BOOT_EMMC 0x6
-#define BOOT_EMMC_4_4 0x7
-#define BOOT_USB 0x100
-
-/*
- * Boot device
- */
-#define SDMMC_CH2 0x0
-#define SDMMC_CH0 0x4
-#define EMMC 0x14
-#define SATA 0x18
-#define SPI_SF 0x28
-#define SFMC 0x34
-#define USB 0x40
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-/* PWM */
-#define CONFIG_PWM
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command definition*/
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-
-#define CONFIG_CMD_MOVI
-#define CONFIG_CMD_MOVINAND
-#define CONFIG_CMD_BOOTZ
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
/* USB */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
/* OHCI : Host 1.0 */
#define CONFIG_USB_OHCI
+
#define CONFIG_EXYNOS_USBD3
#undef CONFIG_USB_CPUMODE
-#ifdef CONFIG_EXYNOS_USBD3
-#ifdef CONFIG_MACH_UNIVERSAL5410
-#define CONFIG_EXYNOS_USBD3_CH1
-#else
#define CONFIG_EXYNOS_USBD3_CH0
-/*#define CONFIG_EXYNOS_USBD3_CH1*/
-#endif
-#else
-#undef CONFIG_S3C_USBD
-#endif
-#define USBD_DOWN_ADDR 0x40000000
#define EXYNOS_SYSREG_BASE EXYNOS5_SYSREG_BASE
#define EXYNOS_POWER_BASE EXYNOS5_POWER_BASE
+#define CONFIG_REVISION_TAG
+
/*
* USBD 3.0 SFR
*/
#define CONFIG_EXYNOS_THERMAL
#define CONFIG_EXYNOS_THERMAL_STABLE_TEMP 82
-/*
- * FASTBOOT
- */
-#define CONFIG_FASTBOOT
-#define CFG_FASTBOOT_SDMMCBSP
-/* Fastboot variables */
-#define CFG_FASTBOOT_TRANSFER_BUFFER (CONFIG_SYS_SDRAM_BASE + 0x8000000)
-#define CFG_FASTBOOT_TRANSFER_BUFFER_SIZE (0x30000000) /* 768MB */
-#define CFG_FASTBOOT_ADDR_KERNEL (CONFIG_SYS_SDRAM_BASE + 0x8000)
-#define CFG_FASTBOOT_ADDR_RAMDISK (CONFIG_SYS_SDRAM_BASE + 0x1000000)
-#define CFG_FASTBOOT_PAGESIZE (2048) // Page size of booting device
-#define CFG_FASTBOOT_SDMMC_BLOCKSIZE (512) // Block size of sdmmc
-#ifdef CONFIG_MMC_64BIT_BUS
-#define CFG_FASTBOOT_MMC_BUFFER (CONFIG_SYS_SDRAM_BASE + 0x58000000)
-#endif
-#define CONFIG_FASTBOOT_GET_MMC_PARTITIONS
-#define CONFIG_FASTBOOT_FLASH_CHUNK
-#ifdef CONFIG_FASTBOOT_FLASH_CHUNK
-#define CONFIG_FASTBOOT_CHUNK_SIZE 64
-#endif
-
-#define CONFIG_FASTBOOT_AUTO_REBOOT
-#define CONFIG_FASTBOOT_AUTO_REBOOT_MODE 0x3
+/* Fastboot variables */
+#define CFG_FASTBOOT_MMC_BUFFER (CONFIG_SYS_SDRAM_BASE + \
+ 0x58000000)
/* MMC SPL */
-#define CONFIG_SPL
#define IROM_FNPTR_BASE 0x02020030
#define SECCOND_BOOT_INFORM_OFFSET 0x00000004
-#define SDMMC_DEV_OFFSET 0x00000000
-#define EMMC_DEV_OFFSET 0x00000014
-
-#define CONFIG_BOOTCOMMAND "run mmcboot"
-
-#ifdef CONFIG_RAMDUMP_MODE
-#define CONFIG_BOOTCOMMAND_RAMDUMP "fastboot"
-#endif
-
-#define CONFIG_BOOTCOMMAND2 ""
-
-/* Configuration for factory reset mode */
-#define CONFIG_FACTORY_RESET_MODE 0xf
-#define CONFIG_FACTORY_RESET_BOOTCOMMAND \
- "ext3format mmc 0:3;ext3format mmc 0:4;" \
- "movi read kernel 0 20008000;" \
- "movi read rootfs 0 21000000 100000;" \
- "bootz 20008000 21000000"
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "ARTIK10 # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC3,115200n8\0"
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_RD_LVL
-
-/* Stack sizes */
-#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
-
#define CONFIG_NR_DRAM_BANKS 8
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define PHYS_SDRAM_12_SIZE (SDRAM_BANK_SIZE - \
CONFIG_TRUSTZONE_RESERVED_DRAM)
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
#define CONFIG_IDENT_STRING " for ARTIK10"
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-/* Configuration of ENV size on mmc */
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
-#include <asm/arch/movi_partition.h>
-
-/* Configuration of ROOTFS_ATAGS */
-#define CONFIG_ROOTFS_ATAGS
-#ifdef CONFIG_ROOTFS_ATAGS
-#define CONFIG_ROOTFS_LEN 100000
-#endif
-
-/* U-boot copy size from boot Media to DRAM.*/
-#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
-#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
-#define CONFIG_DOS_PARTITION
#define CFG_PARTITION_START 0x4000000
#define CONFIG_IRAM_STACK 0x02074000
-/* GPT */
-#define CONFIG_RANDOM_UUID
-#define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_GPT
-#define CONFIG_CMD_PART
-
-#define CONFIG_KERNEL_PART_SIZE 8
-#define CONFIG_RAMDISK_PART_SIZE 16
-#define CONFIG_ROOTFS_PART_SIZE 3072
-#define CONFIG_RECOVERY_PARTITION
-
-#ifdef CONFIG_RECOVERY_PARTITION
-#define CONFIG_ROOTFS_OFFSET 49
-#else
-#define CONFIG_ROOTFS_OFFSET 25
-#endif
-
-#define CONFIG_ROOT_DEV 0
-#define CONFIG_ROOT_PART 1
-
-#define PARTS_DEFAULT \
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=" __stringify(CONFIG_ROOTFS_OFFSET) "MiB,size=" \
- __stringify(CONFIG_ROOTFS_PART_SIZE) "MiB,uuid=${uuid_gpt_rootfs};" \
- "name=data,size=-,uuid=${uuid_gpt_data}\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=" CONFIG_DEFAULT_CONSOLE \
- "consoleon=set console console=" CONFIG_DEFAULT_CONSOLE "; saveenv; reset\0" \
- "consoleoff=set console console=ram; saveenv; reset\0" \
- "rootfslen=" __stringify(CONFIG_ROOTFS_LEN) "\0" \
- "partitions=" PARTS_DEFAULT \
- "rootdev=" __stringify(CONFIG_ROOT_DEV) "\0" \
- "rootpart=" __stringify(CONFIG_ROOT_PART) "\0" \
- "root_rw=rw\0" \
- "opts=loglevel=4\0" \
- "boot_cmd=movi read kernel 0 40008000;" \
- "movi read rootfs 0 43000000 1000000;" \
- "bootz 40008000 43000000\0" \
- "ramfsboot=setenv bootargs ${console} root=/dev/ram0 " \
- "rootfstype=ext2 initrd=0x43000000," \
- __stringify(CONFIG_RAMDISK_PART_SIZE)"M ${opts};" \
- "run boot_cmd\0" \
- "mmcboot=setenv bootargs ${console} " \
- "root=/dev/mmcblk${rootdev}p${rootpart} ${root_rw} " \
- "${opts};run boot_cmd\0" \
- "bootcmd=run mmcboot\0"
-
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
-/* Ethernet Controllor Driver */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_NET_MULTI
-#endif /*CONFIG_CMD_NET*/
-
-/* Disable devicetree support */
-/* #define CONFIG_OF_LIBFDT */
-
/* Base address for secondary boot information */
#define CONFIG_SECONDARY_BOOT_INFORM_BASE (CONFIG_SYS_TEXT_BASE - 0x8)
-/* Offset for pmu reset status */
-#define RST_STAT_OFFSET 0x404
-
/* RST_STAT */
#define WRESET (1 << 10)
-#define SYS_WDTRESET (1 << 9)
+#define SYS_WDTRESET (1 << 9)
-#endif /* __CONFIG_H */
+#endif /* __ARTIK10_H */
* MA 02111-1307 USA
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __ARTIK5_H
+#define __ARTIK5_H
/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_ARCH_EXYNOS
#define CONFIG_ARCH_EXYNOS4
#define CONFIG_CPU_EXYNOS3250 /* which is in a Exynos3250 */
#define CONFIG_MACH_SMDK3250
#define CONFIG_MACH_ARTIK5
-#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <configs/artik_common.h>
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_DCACHE_OFF
+/* TRUSTZONE */
+#define CONFIG_TRUSTZONE_RESERVED_DRAM 0x800000 /* USE 8MB */
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_TEXT_BASE 0x43E00000
#define CONFIG_SPL_TEXT_BASE 0x02025000
#define CONFIG_PHY_IRAM_BASE (0x02020000)
#define CONFIG_PHY_IRAM_NS_BASE (CONFIG_PHY_IRAM_BASE + 0x3F000)
-
-/* TRUSTZONE */
-#define CONFIG_TRUSTZONE_ENABLE
-#ifdef CONFIG_TRUSTZONE_ENABLE
-#undef CONFIG_TZPC
-#define CONFIG_SMC_CMD
-#define CONFIG_TRUSTZONE_RESERVED_DRAM 0x800000 /* USE 8MB */
-#else
-#define CONFIG_TRUSTZONE_RESERVED_DRAM 0x0
-#endif
-
-/* Configuration of bl1 partition size */
-#define CONFIG_BL_MONITOR
-
-/* Configuration of secure boot */
-#undef CONFIG_UBOOT_SECURE_BOOT
-#undef CONFIG_SECURE_BOOT
-
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_UBOOT_SECURE_BOOT
-#define CONFIG_TZSW_SECURE_BOOT
-#define CONFIG_SECURE_ROOTFS
-#define CONFIG_SECURE_CONTEXT_BASE 0x40003800
-#define CONFIG_SECURE_KERNEL_BASE 0x40008000
-#define CONFIG_SECURE_KERNEL_SIZE 0x400000
-#define CONFIG_SECURE_ROOTFS_BASE 0x41000000
-#define CONFIG_SECURE_ROOTFS_SIZE 0x100000
-#endif
-
/*
* clock setting:
* APLL = 700MHz
* EPLL = 800MHz
* VPLL = 335MHz
*/
-/* input clock of PLL: SMDK3250 has 24MHz input clock */
-#ifdef CONFIG_SMDK3250_FPGA_DEBUG
-#define CONFIG_SYS_FIN_12
-#define CONFIG_SYS_CLK_FREQ 12000000 //FPGA clock source: 12MHz
-#else
#define CONFIG_SYS_FIN_24
-#define CONFIG_SYS_CLK_FREQ 24000000 //backup clock in smdk
-#endif
/* Specify the ARM_CLK frequency in MHz */
#define CONFIG_ARM_CLK 700
/* MCLK_CDREX */
#define MCLK_CDREX_400 1
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
-/* Power Down Modes */
-#define S5P_CHECK_SLEEP 0x00000BAD
-#define S5P_CHECK_DIDLE 0xBAD00000
-#define S5P_CHECK_LPA 0xABAD0000
-
-/* Offset for OM status registers */
-#define OM_STATUS_OFFSET 0x0
-
-/* Offset for inform registers */
-#define INFORM0_OFFSET 0x800
-#define INFORM1_OFFSET 0x804
-#define INFORM2_OFFSET 0x808
-#define INFORM3_OFFSET 0x80C
-#define INFORM4_OFFSET 0x810
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
-
/* select serial console configuration */
-#define CONFIG_SERIAL_MULTI
#define CONFIG_SERIAL2 /* use SERIAL 2 */
-#define CONFIG_BAUDRATE 115200
-
-#define TZPC_BASE_OFFSET 0x10000
/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_MSHC
-#define CONFIG_S5P_SDHCI
-
-#if defined(CONFIG_S5P_MSHC)
-#define CONFIG_MMC_SMU_INIT
-#define CONFIG_MMC_EARLY_INIT
-#define MMC_MAX_CHANNEL 4
-#define USE_MMC0
-#define USE_MMC2
-
-#define PHASE_DEVIDER 4
#define SDR_CH0 0x03040000
#define DDR_CH0 0x03010000
-#ifndef CONFIG_SMDK3250_FPGA_DEBUG
#define SDR_CH2 0x03010000
#define DDR_CH2 0x03010000
-#else
-#define SDR_CH2 0x03000000
-#define DDR_CH2 0x03000000
-#endif
-#define SDR_CH4 0x0
-#define DDR_CH4 0x0
-#endif
-
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-/* PWM */
-#define CONFIG_PWM
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command definition*/
-#include <config_cmd_default.h>
-
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-
-#define CONFIG_CMD_MOVI
-#define CONFIG_CMD_MOVINAND
-#define CONFIG_CMD_BOOTZ
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
/* USB */
-#undef CONFIG_CMD_USB
-/* EHCI : 2.0 Host */
-#undef CONFIG_USB_EHCI
-#undef CONFIG_USB_EHCI_EXYNOS
-#undef CONFIG_USB_STORAGE
-
#define CONFIG_S3C_USBD
#undef CONFIG_USB_CPUMODE
-#define CONFIG_EXYNOS_DA
-#define CONFIG_DNW
-#define USBD_DOWN_ADDR 0x40000000
#define EXYNOS_SYSREG_BASE EXYNOS4_SYSREG_BASE
#define EXYNOS_POWER_BASE EXYNOS4_POWER_BASE
-/*
-* DNW
-*/
-#define CONFIG_SPL_EXYNOS_USBD3
-#define CONFIG_DNW_VERSION 0x0a
-#define CONFIG_AUTO_STAT_DNW_VERSION 0x05
-/* #undef CONFIG_AUTO_STAT_DNW_VERSION */
-#define CFG_DNW_TRANSFER_BUFFER (0x48000000)
-#define CFG_DNW_TRANSFER_BUFFER_SIZE (0x30000000) /* 768MB */
-/* #ifdef CONFIG_AUTO_STAT_DNW_VERSION */
-#define CFG_DNW_AUTO_CFG_PARTITION "fdisk -c 0" /* default partition */
-/* #endif */
-
-/*
- * FASTBOOT
- */
-#define CONFIG_FASTBOOT
-#define CFG_FASTBOOT_SDMMCBSP
-/* Fastboot variables */
-#define CFG_FASTBOOT_TRANSFER_BUFFER (0x48000000)
-#define CFG_FASTBOOT_TRANSFER_BUFFER_SIZE (0x30000000) /* 768MB */
-#define CFG_FASTBOOT_ADDR_KERNEL (0x40008000)
-#define CFG_FASTBOOT_ADDR_RAMDISK (0x41000000)
-#define CFG_FASTBOOT_PAGESIZE (2048) // Page size of booting device
-#define CFG_FASTBOOT_SDMMC_BLOCKSIZE (512) // Block size of sdmmc
-#define CONFIG_FASTBOOT_GET_MMC_PARTITIONS
-#define CONFIG_FASTBOOT_FLASH_CHUNK
-#ifdef CONFIG_FASTBOOT_FLASH_CHUNK
-#define CONFIG_FASTBOOT_CHUNK_SIZE 64
-#endif
-
-#define CONFIG_FASTBOOT_AUTO_REBOOT
-#define CONFIG_FASTBOOT_AUTO_REBOOT_MODE 0x3
-
-#ifdef CONFIG_EFI_PARTITION
-#define CONFIG_PRI_GPT_SIZE (34 * 512)
-#define CONFIG_SEC_GPT_SIZE (33 * 512)
-#define CONFIG_16GEMMC_BLK (30535680)
-#endif
-
-#ifdef CONFIG_CPU_EXYNOS3250
-/* CFG_FASTBOOT_TRANSFER_BUFFER + CFG_FASTBOOT_TRANSFER_BUFFER_SIZE */
#define CFG_FASTBOOT_MMC_BUFFER (0x78000000)
-#endif
-
/* MMC SPL */
-#define CONFIG_SPL
#define CONFIG_SPL_15KB
#define IROM_FNPTR_BASE 0x020200A0
#define SECCOND_BOOT_INFORM_OFFSET 0x00000028
-#define SDMMC_DEV_OFFSET 0x00000000
-#define EMMC_DEV_OFFSET 0x00000014
-
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_BOOTCOMMAND "emmc open 0;movi r z f 0 40000000;emmc close 0;" \
- "movi read kernel 0 40008000;movi read rootfs 0 41000000 100000;bootz 40008000 41000000"
-#else
-#define CONFIG_BOOTCOMMAND "run mmcboot"
-#endif
-
-#define CONFIG_BOOTCOMMAND_VIA_SCRIPT "movi init 1;fatload mmc 1 0x40000000 booting_script;source 0x40000000"
-
-#define CONFIG_RECOVERYCOMMAND_1st_SDMMC \
- "movi init 1;" \
- "emmc open 1;" \
- "movi r f 0 0x40000000;" \
- "movi r b 0 0x40008000;" \
- "movi r u 0 0x42000000;" \
- "movi r t 0 0x42100000;" \
- "movi w z f 1 0x40000000;" \
- "movi w z b 1 0x40008000;" \
- "movi w z u 1 0x42000000;" \
- "movi w z t 1 0x42100000;" \
- "emmc close 1;"
-
-#define CONFIG_RECOVERYCOMMAND_SDMMC \
- "emmc partition 0 10 0;" \
- "mmc erase user 0 1072 1;" \
- "movi r f 1 40000000;emmc open 0;movi w z f 0 40000000;emmc close 0;" \
- "movi r b 1 40000000;emmc open 0;movi w z b 0 40000000;emmc close 0;" \
- "movi r u 1 40000000;emmc open 0;movi w z u 0 40000000;emmc close 0;" \
- "movi r t 1 40000000;emmc open 0;movi w z t 0 40000000;emmc close 0;" \
- "reset"
-
-#define CONFIG_RECOVERYCOMMAND_USB \
- "fastboot"
-
-/* Configuration for factory reset mode */
-#define CONFIG_FACTORY_RESET_MODE 0xf
-#define CONFIG_FACTORY_RESET_BOOTCOMMAND \
- "ext3format mmc 0:3;ext3format mmc 0:4;" \
- "movi read kernel 0 40008000;" \
- "movi read rootfs 0 41000000 100000;" \
- "bootz 40008000 41000000"
-#define CONFIG_FACTORY_RESET_COMMAND \
- "ext3format mmc 0:3;ext3format mmc 0:4;reset;"
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-/* define CONFIG_SYS_PROMPT "ESPRESSO3250 # " by surai */
#define CONFIG_SYS_PROMPT "ARITK5 # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_HZ 1000
-
-
-/* Stack sizes */
-#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
-
#define CONFIG_NR_DRAM_BANKS 8
#define SDRAM_BANK_SIZE (64UL << 20UL) /* 64 MB */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define PHYS_SDRAM_8_SIZE (SDRAM_BANK_SIZE - \
CONFIG_TRUSTZONE_RESERVED_DRAM)
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
-/* #define CONFIG_IDENT_STRING " for ESPRESSO3250" by surai */
#define CONFIG_IDENT_STRING " for ARTIK5"
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-
-/* Power Management is enabled */
-#define CONFIG_PM
-#define CONFIG_PM_VDD_ARM 1000
-#define CONFIG_PM_VDD_INT 1000
-#define CONFIG_PM_VDD_G3D 1000
-#define CONFIG_PM_VDD_MIF 1100
-#define CONFIG_PM_VDD_MEM 1200
-
#define CONFIG_PMIC_S5M8767A
-/* Bootloader Recovery */
-#undef CONFIG_RECOVERY_MODE
-
-/* RAMDUMP MODE */
-#define CONFIG_RAMDUMP_MODE 0xD
-
-/* Boot configuration */
-#define BOOT_ONENAND 0x1
-#define BOOT_NAND 0x40000
-#define BOOT_MMCSD 0x3
-#define BOOT_NOR 0x4
-#define BOOT_SEC_DEV 0x5
-#define BOOT_EMMC 0x6
-#define BOOT_EMMC_4_4 0x7
-#define BOOT_EMMC_5_0 BOOT_EMMC_4_4
-#define BOOT_USB 0x100
-
-/* Boot device */
-#define SDMMC_CH2 0x0
-#define SDMMC_CH0 0x4
-#define EMMC 0x14
-#define SATA 0x18
-#define SPI_SF 0x28
-#define SFMC 0x34
-#define USB 0x40
-
-/* Configuration of ENV size on mmc */
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
-
-#include <asm/arch/movi_partition.h>
-
-/* Configuration of ROOTFS_ATAGS */
-#define CONFIG_ROOTFS_ATAGS
-#ifdef CONFIG_ROOTFS_ATAGS
-#define CONFIG_ROOTFS_LEN 100000
-#endif
/* Configuration for Partition */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_NVDATA_PARTITION
#define CFG_PARTITION_START 0x6400000
#define CONFIG_IRAM_STACK 0x02060000
-/* GPT */
-#define CONFIG_RANDOM_UUID
-#define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_GPT
-#define CONFIG_CMD_PART
-
-#define CONFIG_KERNEL_PART_SIZE 8
-#define CONFIG_RAMDISK_PART_SIZE 16
-#define CONFIG_ROOTFS_PART_SIZE 3072
-#define CONFIG_RECOVERY_PARTITION
-
-#ifdef CONFIG_RECOVERY_PARTITION
-#define CONFIG_ROOTFS_OFFSET 49
-#else
-#define CONFIG_ROOTFS_OFFSET 25
-#endif
-
-#define CONFIG_ROOT_DEV 0
-#define CONFIG_ROOT_PART 1
-
-#define PARTS_DEFAULT \
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=" __stringify(CONFIG_ROOTFS_OFFSET) "MiB,size=" \
- __stringify(CONFIG_ROOTFS_PART_SIZE) "MiB,uuid=${uuid_gpt_rootfs};" \
- "name=data,size=-,uuid=${uuid_gpt_data}\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=" CONFIG_DEFAULT_CONSOLE \
- "consoleon=set console console=" CONFIG_DEFAULT_CONSOLE "; saveenv; reset\0" \
- "consoleoff=set console console=ram; saveenv; reset\0" \
- "rootfslen=" __stringify(CONFIG_ROOTFS_LEN) "\0" \
- "partitions=" PARTS_DEFAULT \
- "rootdev=" __stringify(CONFIG_ROOT_DEV) "\0" \
- "rootpart=" __stringify(CONFIG_ROOT_PART) "\0" \
- "root_rw=rw\0" \
- "opts=loglevel=4\0" \
- "boot_cmd=movi read kernel 0 40008000;" \
- "movi read rootfs 0 41000000 1000000;" \
- "bootz 40008000 41000000\0" \
- "ramfsboot=setenv bootargs ${console} root=/dev/ram0 " \
- "rootfstype=ext2 initrd=0x41000000," \
- __stringify(CONFIG_RAMDISK_PART_SIZE)"M ${opts};" \
- "run boot_cmd\0" \
- "mmcboot=setenv bootargs ${console} " \
- "root=/dev/mmcblk${rootdev}p${rootpart} ${root_rw} " \
- "${opts};run boot_cmd\0" \
- "bootcmd=run mmcboot\0"
-
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
-/* Ethernet Controllor Driver */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE 0x5000000
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_ENV_SROM_BANK 1
-#endif /*CONFIG_CMD_NET*/
-
-/* Disable devicetree support */
-/* #define CONFIG_OF_LIBFDT */
-
/* Base address for secondary boot information */
#define CONFIG_SECONDARY_BOOT_INFORM_BASE (CONFIG_SYS_TEXT_BASE - 0x8)
-/* Configurateion of LCD */
-/* #define CONFIG_EXYNOS_FB */
-/* #define CONFIG_USE_LCD */
-/* #define CONFIG_FB_ADDR 0x46000000 */
-
-/* #define CONFIG_SHIRI_LCD */
-/* #define CONFIG_EXYNOS_MIPI_DSIM */
-/* #define CONFIG_CMD_LCD */
-/* #define CONFIG_CMD_LCDTEXT */
-/* #define CONFIG_S5P_LCD_INIT */
-
-/* Offset for pmu reset status */
-#define RST_STAT_OFFSET 0x404
-
/* RST_STAT */
#define SWRESET (1 << 29)
#define WRESET (1 << 28)
#define SYS_WDTRESET (1 << 20)
#define PINRESET (1 << 16)
-#endif /* __CONFIG_H */
+#endif /* __ARTIK5_H */
--- /dev/null
+/*
+ * Copyright (C) 2015 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG ARTIK10 (EXYNOS5422) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ARTIK_COMMON_H
+#define __ARTIK_COMMON_H
+
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P /* S5P Family */
+#define CONFIG_ARCH_EXYNOS /* which is in a Exynos Family */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* TRUSTZONE */
+#define CONFIG_TRUSTZONE_ENABLE
+#undef CONFIG_TZPC
+#define CONFIG_SMC_CMD
+
+/* Configuration of bl1 partition size */
+#define CONFIG_BL_MONITOR
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_DCACHE_OFF
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_TEXT_BASE 0x43E00000
+
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+/* RAMDUMP MODE */
+#define CONFIG_RAMDUMP_MODE 0xD
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
+
+/* Offset for OM status registers */
+#define OM_STATUS_OFFSET 0x0
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET 0x800
+#define INFORM1_OFFSET 0x804
+#define INFORM2_OFFSET 0x808
+#define INFORM3_OFFSET 0x80C
+#define INFORM4_OFFSET 0x810
+
+/* Offset for pmu reset status */
+#define RST_STAT_OFFSET 0x404
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_BAUDRATE 115200
+
+#define TZPC_BASE_OFFSET 0x10000
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_MSHC
+#define CONFIG_S5P_SDHCI
+
+#define CONFIG_MMC_SMU_INIT
+#define CONFIG_MMC_EARLY_INIT
+#define MMC_MAX_CHANNEL 4
+#define USE_MMC0
+#define USE_MMC2
+
+#define PHASE_DEVIDER 4
+
+/* Boot configuration */
+#define BOOT_ONENAND 0x1
+#define BOOT_NAND 0x40000
+#define BOOT_MMCSD 0x3
+#define BOOT_NOR 0x4
+#define BOOT_SEC_DEV 0x5
+#define BOOT_EMMC 0x6
+#define BOOT_EMMC_4_4 0x7
+#define BOOT_EMMC_5_0 BOOT_EMMC_4_4
+#define BOOT_USB 0x100
+
+/*
+ * Boot device
+ */
+#define SDMMC_CH2 0x0
+#define SDMMC_CH0 0x4
+#define EMMC 0x14
+#define SATA 0x18
+#define SPI_SF 0x28
+#define SFMC 0x34
+#define USB 0x40
+
+/* PWM */
+#define CONFIG_PWM
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+/* FASTBOOT */
+#define CONFIG_FASTBOOT
+#define CFG_FASTBOOT_SDMMCBSP
+/* Fastboot variables */
+#define CFG_FASTBOOT_TRANSFER_BUFFER (0x48000000)
+#define CFG_FASTBOOT_TRANSFER_BUFFER_SIZE (0x30000000) /* 768MB */
+#define CFG_FASTBOOT_ADDR_KERNEL (0x40008000)
+#define CFG_FASTBOOT_ADDR_RAMDISK (0x41000000)
+#define CFG_FASTBOOT_PAGESIZE (2048)
+#define CFG_FASTBOOT_SDMMC_BLOCKSIZE (512)
+
+#define CONFIG_FASTBOOT_GET_MMC_PARTITIONS
+#define CONFIG_FASTBOOT_FLASH_CHUNK
+#ifdef CONFIG_FASTBOOT_FLASH_CHUNK
+#define CONFIG_FASTBOOT_CHUNK_SIZE 64
+#endif
+
+#define CONFIG_FASTBOOT_AUTO_REBOOT
+#define CONFIG_FASTBOOT_AUTO_REBOOT_MODE 0x3
+
+#define CONFIG_SPL
+#define SDMMC_DEV_OFFSET 0x00000000
+#define EMMC_DEV_OFFSET 0x00000014
+
+#define CONFIG_BOOTCOMMAND "run mmcboot"
+
+#define CONFIG_BOOTCOMMAND_RAMDUMP "fastboot"
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+
+#define CONFIG_SYS_HZ 1000
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+/* Configuration for Partition */
+#define CONFIG_DOS_PARTITION
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+
+/* GPT */
+#define CONFIG_RANDOM_UUID
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_GPT
+#define CONFIG_CMD_PART
+
+#define CONFIG_CMD_MOVI
+#define CONFIG_CMD_MOVINAND
+#define CONFIG_CMD_BOOTZ
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+/* USB */
+#define USBD_DOWN_ADDR 0x40000000
+
+/* Configuration of ENV size on mmc */
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+
+#include <asm/arch/movi_partition.h>
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+
+/* Configuration of ROOTFS_ATAGS */
+#define CONFIG_ROOTFS_ATAGS
+#define CONFIG_ROOTFS_LEN 100000
+
+#define CONFIG_KERNEL_PART_SIZE 8
+#define CONFIG_RAMDISK_PART_SIZE 16
+#define CONFIG_ROOTFS_PART_SIZE 3072
+#define CONFIG_RECOVERY_PARTITION
+
+#ifdef CONFIG_RECOVERY_PARTITION
+#define CONFIG_ROOTFS_OFFSET 49
+#else
+#define CONFIG_ROOTFS_OFFSET 25
+#endif
+
+#define CONFIG_ROOT_DEV 0
+#define CONFIG_ROOT_PART 1
+
+#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,start=" __stringify(CONFIG_ROOTFS_OFFSET) "MiB,size=" \
+ __stringify(CONFIG_ROOTFS_PART_SIZE) "MiB,uuid=${uuid_gpt_rootfs};" \
+ "name=data,size=-,uuid=${uuid_gpt_data}\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=" CONFIG_DEFAULT_CONSOLE \
+ "consoleon=set console console=" CONFIG_DEFAULT_CONSOLE "; saveenv; reset\0" \
+ "consoleoff=set console console=ram; saveenv; reset\0" \
+ "rootfslen=" __stringify(CONFIG_ROOTFS_LEN) "\0" \
+ "partitions=" PARTS_DEFAULT \
+ "rootdev=" __stringify(CONFIG_ROOT_DEV) "\0" \
+ "rootpart=" __stringify(CONFIG_ROOT_PART) "\0" \
+ "root_rw=rw\0" \
+ "opts=loglevel=4\0" \
+ "boot_cmd=movi read kernel 0 40008000;" \
+ "movi read rootfs 0 43000000 1000000;" \
+ "bootz 40008000 43000000\0" \
+ "ramfsboot=setenv bootargs ${console} root=/dev/ram0 " \
+ "rootfstype=ext2 initrd=0x43000000," \
+ __stringify(CONFIG_RAMDISK_PART_SIZE)"M ${opts};" \
+ "run boot_cmd\0" \
+ "mmcboot=setenv bootargs ${console} " \
+ "root=/dev/mmcblk${rootdev}p${rootpart} ${root_rw} " \
+ "${opts};run boot_cmd\0" \
+ "bootcmd=run mmcboot\0"
+
+#endif /* __ARTIK_COMMON_H */
projects / profile / common / platform / kernel / u-boot-artik.git / commitdiff