ColdFire 5282: Fix external flash boot and return dramsize

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>

diff --git a/board/m5282evb/m5282evb.c b/board/m5282evb/m5282evb.c
index 243d6a4..7d6d1d6 100644 (file)
--- a/board/m5282evb/m5282evb.c
+++ b/board/m5282evb/m5282evb.c
@@ -89,4 +89,5 @@ long int initdram (int board_type)
                /* Write to the SDRAM Mode Register */
                *(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
        }
+       return dramsize;
 }

diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 686e2a5..260a09a 100644 (file)
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -58,7 +58,7 @@ _vectors:
 .long  0x00000000              /* Flash offset is 0 until we setup CS0 */
 #if defined(CONFIG_R5200)
 .long  0x400
-#elif defined(CONFIG_M5282)
+#elif defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
 .long  _start - TEXT_BASE
 #else
 .long  _START
@@ -177,7 +177,11 @@ _after_flashbar_copy:
         * therefore no VBR to set
         */
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
+       move.l  #CFG_INT_FLASH_BASE, %d0
+#else
        move.l  #CFG_FLASH_BASE, %d0
+#endif
        movec   %d0, %VBR
 #endif
 

diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index 3c17c1e..7bb9f60 100644 (file)
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -163,7 +163,7 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE         0x00000000
-#define        CFG_SDRAM_SIZE          8       /* SDRAM size in MB */
+#define        CFG_SDRAM_SIZE          16      /* SDRAM size in MB */
 #define CFG_FLASH_BASE         0xffe00000
 #define        CFG_INT_FLASH_BASE      0xf0000000
 #define CFG_INT_FLASH_ENABLE   0x21