This patch uses the unique id to identify the type of external connector instead
of string name. The string name have the many potential issues. So, this patch
defines the 'extcon' enumeration which includes all supported external connector
on EXTCON subsystem. If new external connector is necessary, the unique id of
new connector have to be added in 'extcon' enumeration. There are current
supported external connector in 'enum extcon' as following:
enum extcon {
EXTCON_NONE = 0x0,
/* USB external connector */
EXTCON_USB = 0x1,
EXTCON_USB_HOST = 0x2,
/* Charger external connector */
EXTCON_TA = 0x10,
EXTCON_FAST_CHARGER = 0x11,
EXTCON_SLOW_CHARGER = 0x12,
EXTCON_CHARGE_DOWNSTREAM = 0x13,
/* Audio and video external connector */
EXTCON_LINE_IN = 0x20,
EXTCON_LINE_OUT = 0x21,
EXTCON_MICROPHONE = 0x22,
EXTCON_HEADPHONE = 0x23,
EXTCON_HDMI = 0x30,
EXTCON_MHL = 0x31,
EXTCON_DVI = 0x32,
EXTCON_VGA = 0x33,
EXTCON_SPDIF_IN = 0x34,
EXTCON_SPDIF_OUT = 0x35,
EXTCON_VIDEO_IN = 0x36,
EXTCON_VIDEO_OUT = 0x37,
/* Miscellaneous external connector */
EXTCON_DOCK = 0x50,
EXTCON_JIG = 0x51,
EXTCON_MECHANICAL = 0x52,
EXTCON_END,
};
For example in extcon-arizona.c:
To use unique id removes the potential issue about handling
the inconsistent name of external connector with string.
- Previously, use the string to register the type of arizona jack connector
static const char *arizona_cable[] = {
"Mechanical",
"Microphone",
"Headphone",
"Line-out",
};
- Newly, use the unique id to register the type of arizona jack connector
static const enum extcon arizona_cable[] = {
EXTCON_MECHANICAL,
EXTCON_MICROPHONE,
EXTCON_HEADPHONE,
EXTCON_LINE_OUT,
EXTCON_NONE,
};
And this patch modify the prototype of extcon_{get|set}_cable_state_() which
uses the 'enum extcon id' instead of 'cable_index'. Because although one more
extcon drivers support USB cable, each extcon driver might has the differnt
'cable_index' for USB cable. All extcon drivers can use the unique id number
for same external connector with modified extcon_{get|set}_cable_state_().
- Previously, use 'cable_index' on these functions:
extcon_get_cable_state_(struct extcon_dev*, int cable_index)
extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state)
-Newly, use 'enum extcon id' on these functions:
extcon_get_cable_state_(struct extcon_dev*, enum extcon id)
extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[arnd: Report the build break about drivers/usb/phy/phy-tahvo.c after using the
unique id for external connector insteadf of string]
Reported-by: Arnd Bergmann <arnd@arndb.de>
[dan.carpenter: Report the build warning of extcon_{set|get}_cable_state_()]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
1257,
};
-#define ARIZONA_CABLE_MECHANICAL 0
-#define ARIZONA_CABLE_MICROPHONE 1
-#define ARIZONA_CABLE_HEADPHONE 2
-#define ARIZONA_CABLE_LINEOUT 3
-
-static const char *arizona_cable[] = {
- "Mechanical",
- "Microphone",
- "Headphone",
- "Line-out",
- NULL,
+static const enum extcon arizona_cable[] = {
+ EXTCON_MECHANICAL,
+ EXTCON_MICROPHONE,
+ EXTCON_HEADPHONE,
+ EXTCON_LINE_OUT,
+ EXTCON_NONE,
};
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
- int report = ARIZONA_CABLE_HEADPHONE;
+ enum extcon report = EXTCON_HEADPHONE;
int ret, reading;
bool mic = false;
}
/* If the cable was removed while measuring ignore the result */
- ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
+ ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
/* Report high impedence cables as line outputs */
if (reading >= 5000)
- report = ARIZONA_CABLE_LINEOUT;
+ report = EXTCON_LINE_OUT;
else
- report = ARIZONA_CABLE_HEADPHONE;
+ report = EXTCON_HEADPHONE;
ret = extcon_set_cable_state_(info->edev, report, true);
if (ret != 0)
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
- ret = extcon_set_cable_state_(info->edev,
- ARIZONA_CABLE_HEADPHONE, true);
+ ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
- ret = extcon_set_cable_state_(info->edev,
- ARIZONA_CABLE_HEADPHONE, true);
+ ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
mutex_lock(&info->lock);
/* If the cable was removed while measuring ignore the result */
- ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
+ ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
arizona_identify_headphone(info);
ret = extcon_set_cable_state_(info->edev,
- ARIZONA_CABLE_MICROPHONE, true);
-
+ EXTCON_MICROPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Headset report failed: %d\n",
ret);
if (info->last_jackdet == present) {
dev_dbg(arizona->dev, "Detected jack\n");
ret = extcon_set_cable_state_(info->edev,
- ARIZONA_CABLE_MECHANICAL, true);
+ EXTCON_MECHANICAL, true);
if (ret != 0)
dev_err(arizona->dev, "Mechanical report failed: %d\n",
/* IRQ enable-6 register */
#define BC12_IRQ_CFG_MASK BIT(1)
-#define AXP288_EXTCON_SLOW_CHARGER "SLOW-CHARGER"
-#define AXP288_EXTCON_DOWNSTREAM_CHARGER "CHARGE-DOWNSTREAM"
-#define AXP288_EXTCON_FAST_CHARGER "FAST-CHARGER"
-
enum axp288_extcon_reg {
AXP288_PS_STAT_REG = 0x00,
AXP288_PS_BOOT_REASON_REG = 0x02,
EXTCON_IRQ_END,
};
-static const char *axp288_extcon_cables[] = {
- AXP288_EXTCON_SLOW_CHARGER,
- AXP288_EXTCON_DOWNSTREAM_CHARGER,
- AXP288_EXTCON_FAST_CHARGER,
- NULL,
+static const enum extcon axp288_extcon_cables[] = {
+ EXTCON_SLOW_CHARGER,
+ EXTCON_CHARGE_DOWNSTREAM,
+ EXTCON_FAST_CHARGER,
+ EXTCON_NONE,
};
struct axp288_extcon_info {
static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
{
static bool notify_otg, notify_charger;
- static char *cable;
+ static enum extcon cable;
int ret, stat, cfg, pwr_stat;
u8 chrg_type;
bool vbus_attach = false;
dev_dbg(info->dev, "sdp cable is connecetd\n");
notify_otg = true;
notify_charger = true;
- cable = AXP288_EXTCON_SLOW_CHARGER;
+ cable = EXTCON_SLOW_CHARGER;
break;
case DET_STAT_CDP:
dev_dbg(info->dev, "cdp cable is connecetd\n");
notify_otg = true;
notify_charger = true;
- cable = AXP288_EXTCON_DOWNSTREAM_CHARGER;
+ cable = EXTCON_CHARGE_DOWNSTREAM;
break;
case DET_STAT_DCP:
dev_dbg(info->dev, "dcp cable is connecetd\n");
notify_charger = true;
- cable = AXP288_EXTCON_FAST_CHARGER;
+ cable = EXTCON_FAST_CHARGER;
break;
default:
dev_warn(info->dev,
}
if (notify_charger)
- extcon_set_cable_state(info->edev, cable, vbus_attach);
+ extcon_set_cable_state_(info->edev, cable, vbus_attach);
/* Clear the flags on disconnect event */
if (!vbus_attach)
MAX14577_MUIC_ADC_OPEN,
};
-/* max14577 MUIC device support below list of accessories(external connector) */
-enum {
- EXTCON_CABLE_USB = 0,
- EXTCON_CABLE_TA,
- EXTCON_CABLE_FAST_CHARGER,
- EXTCON_CABLE_SLOW_CHARGER,
- EXTCON_CABLE_CHARGE_DOWNSTREAM,
- EXTCON_CABLE_JIG,
-
- _EXTCON_CABLE_NUM,
-};
-
-static const char *max14577_extcon_cable[] = {
- [EXTCON_CABLE_USB] = "USB",
- [EXTCON_CABLE_TA] = "TA",
- [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
- [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
- [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
- [EXTCON_CABLE_JIG] = "JIG",
-
- NULL,
+static const enum extcon max14577_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_TA,
+ EXTCON_FAST_CHARGER,
+ EXTCON_SLOW_CHARGER,
+ EXTCON_CHARGE_DOWNSTREAM,
+ EXTCON_JIG,
+ EXTCON_NONE,
};
/*
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "JIG", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
return 0;
}
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "USB", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
- extcon_set_cable_state(info->edev, "TA", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
- extcon_set_cable_state(info->edev,
- "Charge-downstream", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+ attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
- extcon_set_cable_state(info->edev, "Slow-charger", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+ attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_1A:
- extcon_set_cable_state(info->edev, "Fast-charger", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+ attached);
break;
case MAX14577_CHARGER_TYPE_NONE:
case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
/*
* MAX77693 MUIC device support below list of accessories(external connector)
*/
-enum {
- EXTCON_CABLE_USB = 0,
- EXTCON_CABLE_USB_HOST,
- EXTCON_CABLE_TA,
- EXTCON_CABLE_FAST_CHARGER,
- EXTCON_CABLE_SLOW_CHARGER,
- EXTCON_CABLE_CHARGE_DOWNSTREAM,
- EXTCON_CABLE_MHL,
- EXTCON_CABLE_JIG,
- EXTCON_CABLE_DOCK,
-
- _EXTCON_CABLE_NUM,
-};
-
-static const char *max77693_extcon_cable[] = {
- [EXTCON_CABLE_USB] = "USB",
- [EXTCON_CABLE_USB_HOST] = "USB-Host",
- [EXTCON_CABLE_TA] = "TA",
- [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
- [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
- [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
- [EXTCON_CABLE_MHL] = "MHL",
- [EXTCON_CABLE_JIG] = "JIG",
- [EXTCON_CABLE_DOCK] = "DOCK",
-
- NULL,
+static const enum extcon max77693_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_TA,
+ EXTCON_FAST_CHARGER,
+ EXTCON_SLOW_CHARGER,
+ EXTCON_CHARGE_DOWNSTREAM,
+ EXTCON_MHL,
+ EXTCON_JIG,
+ EXTCON_DOCK,
+ EXTCON_NONE,
};
/*
int ret = 0;
int vbvolt;
bool cable_attached;
- char dock_name[CABLE_NAME_MAX];
+ enum extcon dock_id;
dev_info(info->dev,
"external connector is %s (adc:0x%02x)\n",
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "DOCK", attached);
- extcon_set_cable_state(info->edev, "MHL", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
+ extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
goto out;
case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */
- strcpy(dock_name, "DOCK");
+ dock_id = EXTCON_DOCK;
break;
case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */
- strcpy(dock_name, "DOCK");
+ dock_id = EXTCON_DOCK;
if (!attached)
- extcon_set_cable_state(info->edev, "USB", false);
+ extcon_set_cable_state_(info->edev, EXTCON_USB, false);
break;
default:
dev_err(info->dev, "failed to detect %s dock device\n",
ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, dock_name, attached);
+ extcon_set_cable_state_(info->edev, dock_id, attached);
out:
return 0;
ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "USB-Host", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77693_MUIC_GND_AV_CABLE_LOAD:
/* Audio Video Cable with load, PATH:AUDIO */
ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev,
- "Audio-video-load", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX77693_MUIC_GND_MHL:
case MAX77693_MUIC_GND_MHL_VB:
/* MHL or MHL with USB/TA cable */
- extcon_set_cable_state(info->edev, "MHL", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
break;
default:
dev_err(info->dev, "failed to detect %s cable of gnd type\n",
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "JIG", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
return 0;
}
* - Support charging through micro-usb port without
* data connection
*/
- extcon_set_cable_state(info->edev, "TA", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
if (!cable_attached)
- extcon_set_cable_state(info->edev,
- "MHL", cable_attached);
+ extcon_set_cable_state_(info->edev, EXTCON_MHL,
+ cable_attached);
break;
}
* - Support charging through micro-usb port without
* data connection.
*/
- extcon_set_cable_state(info->edev, "USB", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB,
+ attached);
if (!cable_attached)
- extcon_set_cable_state(info->edev, "DOCK",
- cable_attached);
+ extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+ cable_attached);
break;
case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
/*
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "DOCK", attached);
- extcon_set_cable_state(info->edev, "MHL", attached);
-
+ extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+ attached);
+ extcon_set_cable_state_(info->edev, EXTCON_MHL,
+ attached);
break;
}
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "USB", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB,
+ attached);
break;
case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
/* Only TA cable */
- extcon_set_cable_state(info->edev, "TA", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
}
break;
case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
- extcon_set_cable_state(info->edev,
- "Charge-downstream", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+ attached);
break;
case MAX77693_CHARGER_TYPE_APPLE_500MA:
- extcon_set_cable_state(info->edev, "Slow-charger", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+ attached);
break;
case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
- extcon_set_cable_state(info->edev, "Fast-charger", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+ attached);
break;
case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
break;
MAX77843_MUIC_CHG_GND,
};
-enum {
- MAX77843_CABLE_USB = 0,
- MAX77843_CABLE_USB_HOST,
- MAX77843_CABLE_TA,
- MAX77843_CABLE_CHARGE_DOWNSTREAM,
- MAX77843_CABLE_FAST_CHARGER,
- MAX77843_CABLE_SLOW_CHARGER,
- MAX77843_CABLE_MHL,
- MAX77843_CABLE_JIG,
-
- MAX77843_CABLE_NUM,
-};
-
-static const char *max77843_extcon_cable[] = {
- [MAX77843_CABLE_USB] = "USB",
- [MAX77843_CABLE_USB_HOST] = "USB-HOST",
- [MAX77843_CABLE_TA] = "TA",
- [MAX77843_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-DOWNSTREAM",
- [MAX77843_CABLE_FAST_CHARGER] = "FAST-CHARGER",
- [MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
- [MAX77843_CABLE_MHL] = "MHL",
- [MAX77843_CABLE_JIG] = "JIG",
+static const enum extcon max77843_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_TA,
+ EXTCON_CHARGE_DOWNSTREAM,
+ EXTCON_FAST_CHARGER,
+ EXTCON_SLOW_CHARGER,
+ EXTCON_MHL,
+ EXTCON_JIG,
+ EXTCON_NONE,
};
struct max77843_muic_irq {
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "USB-HOST", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77843_MUIC_GND_MHL_VB:
case MAX77843_MUIC_GND_MHL:
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "MHL", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
break;
default:
dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "JIG", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
return 0;
}
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "USB", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX77843_MUIC_CHG_DOWNSTREAM:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev,
- "CHARGER-DOWNSTREAM", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+ attached);
break;
case MAX77843_MUIC_CHG_DEDICATED:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "TA", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_500MA:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+ attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_1A:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+ attached);
break;
case MAX77843_MUIC_CHG_GND:
gnd_type = max77843_muic_get_cable_type(info,
/* Charger cable on MHL accessory is attach or detach */
if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
- extcon_set_cable_state(info->edev, "TA", true);
+ extcon_set_cable_state_(info->edev, EXTCON_TA, true);
else if (gnd_type == MAX77843_MUIC_GND_MHL)
- extcon_set_cable_state(info->edev, "TA", false);
+ extcon_set_cable_state_(info->edev, EXTCON_TA, false);
break;
case MAX77843_MUIC_CHG_NONE:
break;
int path_uart;
};
-enum {
- EXTCON_CABLE_USB = 0,
- EXTCON_CABLE_USB_HOST,
- EXTCON_CABLE_TA,
- EXTCON_CABLE_FAST_CHARGER,
- EXTCON_CABLE_SLOW_CHARGER,
- EXTCON_CABLE_CHARGE_DOWNSTREAM,
- EXTCON_CABLE_MHL,
- EXTCON_CABLE_DOCK,
- EXTCON_CABLE_JIG,
-
- _EXTCON_CABLE_NUM,
-};
-
-static const char *max8997_extcon_cable[] = {
- [EXTCON_CABLE_USB] = "USB",
- [EXTCON_CABLE_USB_HOST] = "USB-Host",
- [EXTCON_CABLE_TA] = "TA",
- [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
- [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
- [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
- [EXTCON_CABLE_MHL] = "MHL",
- [EXTCON_CABLE_DOCK] = "DOCK",
- [EXTCON_CABLE_JIG] = "JIG",
-
- NULL,
+static const enum extcon max8997_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_TA,
+ EXTCON_FAST_CHARGER,
+ EXTCON_SLOW_CHARGER,
+ EXTCON_CHARGE_DOWNSTREAM,
+ EXTCON_MHL,
+ EXTCON_DOCK,
+ EXTCON_JIG,
+ EXTCON_NONE,
};
/*
switch (usb_type) {
case MAX8997_USB_HOST:
- extcon_set_cable_state(info->edev, "USB-Host", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX8997_USB_DEVICE:
- extcon_set_cable_state(info->edev, "USB", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
default:
dev_err(info->dev, "failed to detect %s usb cable\n",
switch (cable_type) {
case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
- extcon_set_cable_state(info->edev, "DOCK", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
break;
default:
dev_err(info->dev, "failed to detect %s dock device\n",
return ret;
}
- extcon_set_cable_state(info->edev, "JIG", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
return 0;
}
return ret;
break;
case MAX8997_MUIC_ADC_MHL:
- extcon_set_cable_state(info->edev, "MHL", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
break;
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
}
break;
case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
- extcon_set_cable_state(info->edev,
- "Charge-downstream", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+ attached);
break;
case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
- extcon_set_cable_state(info->edev, "TA", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
case MAX8997_CHARGER_TYPE_500MA:
- extcon_set_cable_state(info->edev, "Slow-charger", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+ attached);
break;
case MAX8997_CHARGER_TYPE_1A:
- extcon_set_cable_state(info->edev, "Fast-charger", attached);
+ extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+ attached);
break;
default:
dev_err(info->dev,
#include <linux/of.h>
#include <linux/of_platform.h>
-static const char *palmas_extcon_cable[] = {
- [0] = "USB",
- [1] = "USB-HOST",
- NULL,
+static const enum extcon palmas_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_NONE,
};
static const int mutually_exclusive[] = {0x3, 0x0};
static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
{
struct palmas_usb *palmas_usb = _palmas_usb;
+ struct extcon_dev *edev = palmas_usb->edev;
unsigned int vbus_line_state;
palmas_read(palmas_usb->palmas, PALMAS_INTERRUPT_BASE,
if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
- extcon_set_cable_state(palmas_usb->edev, "USB", true);
+ extcon_set_cable_state_(edev, EXTCON_USB, true);
dev_info(palmas_usb->dev, "USB cable is attached\n");
} else {
dev_dbg(palmas_usb->dev,
} else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state(palmas_usb->edev, "USB", false);
+ extcon_set_cable_state_(edev, EXTCON_USB, false);
dev_info(palmas_usb->dev, "USB cable is detached\n");
} else {
dev_dbg(palmas_usb->dev,
{
unsigned int set, id_src;
struct palmas_usb *palmas_usb = _palmas_usb;
+ struct extcon_dev *edev = palmas_usb->edev;
palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_SET, &set);
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
- extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
+ extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
+ extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
+ extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
- extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
+ extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
}
};
/* List of detectable cables */
-enum {
- EXTCON_CABLE_USB = 0,
- EXTCON_CABLE_USB_HOST,
- EXTCON_CABLE_TA,
- EXTCON_CABLE_JIG,
-
- EXTCON_CABLE_END,
-};
-
-static const char *rt8973a_extcon_cable[] = {
- [EXTCON_CABLE_USB] = "USB",
- [EXTCON_CABLE_USB_HOST] = "USB-Host",
- [EXTCON_CABLE_TA] = "TA",
- [EXTCON_CABLE_JIG] = "JIG",
- NULL,
+static const enum extcon rt8973a_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_TA,
+ EXTCON_JIG,
+ EXTCON_NONE,
};
/* Define OVP (Over Voltage Protection), OTP (Over Temperature Protection) */
enum rt8973a_event_type event)
{
static unsigned int prev_cable_type;
- const char **cable_names = info->edev->supported_cable;
unsigned int con_sw = DM_DP_SWITCH_UART;
- int ret, idx = 0, cable_type;
+ int ret, cable_type;
+ enum extcon id;
bool attached = false;
- if (!cable_names)
- return 0;
-
switch (event) {
case RT8973A_EVENT_ATTACH:
cable_type = rt8973a_muic_get_cable_type(info);
switch (cable_type) {
case RT8973A_MUIC_ADC_OTG:
- idx = EXTCON_CABLE_USB_HOST;
+ id = EXTCON_USB_HOST;
con_sw = DM_DP_SWITCH_USB;
break;
case RT8973A_MUIC_ADC_TA:
- idx = EXTCON_CABLE_TA;
+ id = EXTCON_TA;
con_sw = DM_DP_SWITCH_OPEN;
break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
- idx = EXTCON_CABLE_JIG;
+ id = EXTCON_JIG;
con_sw = DM_DP_SWITCH_USB;
break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
- idx = EXTCON_CABLE_JIG;
+ id = EXTCON_JIG;
con_sw = DM_DP_SWITCH_UART;
break;
case RT8973A_MUIC_ADC_USB:
- idx = EXTCON_CABLE_USB;
+ id = EXTCON_USB;
con_sw = DM_DP_SWITCH_USB;
break;
case RT8973A_MUIC_ADC_OPEN:
return ret;
/* Change the state of external accessory */
- extcon_set_cable_state(info->edev, cable_names[idx], attached);
+ extcon_set_cable_state_(info->edev, id, attached);
return 0;
}
};
/* List of detectable cables */
-enum {
- EXTCON_CABLE_USB = 0,
- EXTCON_CABLE_USB_HOST,
- EXTCON_CABLE_TA,
-
- EXTCON_CABLE_END,
-};
-
-static const char *sm5502_extcon_cable[] = {
- [EXTCON_CABLE_USB] = "USB",
- [EXTCON_CABLE_USB_HOST] = "USB-Host",
- [EXTCON_CABLE_TA] = "TA",
- NULL,
+static const enum extcon sm5502_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_TA,
+ EXTCON_NONE,
};
/* Define supported accessory type */
bool attached)
{
static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
- const char **cable_names = info->edev->supported_cable;
unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
unsigned int con_sw = DM_DP_SWITCH_OPEN;
unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
- unsigned int idx = 0;
+ enum extcon id;
int ret;
- if (!cable_names)
- return 0;
-
/* Get the type of attached or detached cable */
if (attached)
cable_type = sm5502_muic_get_cable_type(info);
switch (cable_type) {
case SM5502_MUIC_ADC_OPEN_USB:
- idx = EXTCON_CABLE_USB;
+ id = EXTCON_USB;
con_sw = DM_DP_SWITCH_USB;
vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB;
break;
case SM5502_MUIC_ADC_OPEN_TA:
- idx = EXTCON_CABLE_TA;
+ id = EXTCON_TA;
con_sw = DM_DP_SWITCH_OPEN;
vbus_sw = VBUSIN_SWITCH_VBUSOUT;
break;
case SM5502_MUIC_ADC_OPEN_USB_OTG:
- idx = EXTCON_CABLE_USB_HOST;
+ id = EXTCON_USB_HOST;
con_sw = DM_DP_SWITCH_USB;
vbus_sw = VBUSIN_SWITCH_OPEN;
break;
return ret;
/* Change the state of external accessory */
- extcon_set_cable_state(info->edev, cable_names[idx], attached);
+ extcon_set_cable_state_(info->edev, id, attached);
return 0;
}
struct delayed_work wq_detcable;
};
-/* List of detectable cables */
-enum {
- EXTCON_CABLE_USB = 0,
- EXTCON_CABLE_USB_HOST,
-
- EXTCON_CABLE_END,
-};
-
-static const char *usb_extcon_cable[] = {
- [EXTCON_CABLE_USB] = "USB",
- [EXTCON_CABLE_USB_HOST] = "USB-HOST",
- NULL,
+static const enum extcon usb_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_NONE,
};
static void usb_extcon_detect_cable(struct work_struct *work)
* As we don't have event for USB peripheral cable attached,
* we simulate USB peripheral attach here.
*/
- extcon_set_cable_state(info->edev,
- usb_extcon_cable[EXTCON_CABLE_USB_HOST],
- false);
- extcon_set_cable_state(info->edev,
- usb_extcon_cable[EXTCON_CABLE_USB],
- true);
+ extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
+ extcon_set_cable_state_(info->edev, EXTCON_USB, true);
} else {
/*
* ID = 0 means USB HOST cable attached.
* As we don't have event for USB peripheral cable detached,
* we simulate USB peripheral detach here.
*/
- extcon_set_cable_state(info->edev,
- usb_extcon_cable[EXTCON_CABLE_USB],
- false);
- extcon_set_cable_state(info->edev,
- usb_extcon_cable[EXTCON_CABLE_USB_HOST],
- true);
+ extcon_set_cable_state_(info->edev, EXTCON_USB, false);
+ extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);
}
}
*
* External connector (extcon) class driver
*
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
* Copyright (C) 2012 Samsung Electronics
* Author: Donggeun Kim <dg77.kim@samsung.com>
* Author: MyungJoo Ham <myungjoo.ham@samsung.com>
#include <linux/slab.h>
#include <linux/sysfs.h>
-/*
- * extcon_cable_name suggests the standard cable names for commonly used
- * cable types.
- *
- * However, please do not use extcon_cable_name directly for extcon_dev
- * struct's supported_cable pointer unless your device really supports
- * every single port-type of the following cable names. Please choose cable
- * names that are actually used in your extcon device.
- */
-const char extcon_cable_name[][CABLE_NAME_MAX + 1] = {
+#define SUPPORTED_CABLE_MAX 32
+#define CABLE_NAME_MAX 30
+
+static const char *extcon_name[] = {
[EXTCON_USB] = "USB",
[EXTCON_USB_HOST] = "USB-Host",
[EXTCON_TA] = "TA",
[EXTCON_FAST_CHARGER] = "Fast-charger",
[EXTCON_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CHARGE_DOWNSTREAM] = "Charge-downstream",
+ [EXTCON_LINE_IN] = "Line-in",
+ [EXTCON_LINE_OUT] = "Line-out",
+ [EXTCON_MICROPHONE] = "Microphone",
+ [EXTCON_HEADPHONE] = "Headphone",
[EXTCON_HDMI] = "HDMI",
[EXTCON_MHL] = "MHL",
[EXTCON_DVI] = "DVI",
[EXTCON_VGA] = "VGA",
- [EXTCON_DOCK] = "Dock",
- [EXTCON_LINE_IN] = "Line-in",
- [EXTCON_LINE_OUT] = "Line-out",
- [EXTCON_MIC_IN] = "Microphone",
- [EXTCON_HEADPHONE_OUT] = "Headphone",
[EXTCON_SPDIF_IN] = "SPDIF-in",
[EXTCON_SPDIF_OUT] = "SPDIF-out",
[EXTCON_VIDEO_IN] = "Video-in",
[EXTCON_VIDEO_OUT] = "Video-out",
+ [EXTCON_DOCK] = "Dock",
+ [EXTCON_JIG] = "JIG",
[EXTCON_MECHANICAL] = "Mechanical",
+ NULL,
};
static struct class *extcon_class;
return 0;
}
+static int find_cable_index_by_id(struct extcon_dev *edev, const enum extcon id)
+{
+ int i;
+
+ /* Find the the index of extcon cable in edev->supported_cable */
+ for (i = 0; i < edev->max_supported; i++) {
+ if (edev->supported_cable[i] == id)
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int find_cable_index_by_name(struct extcon_dev *edev, const char *name)
+{
+ enum extcon id = EXTCON_NONE;
+ int i;
+
+ if (edev->max_supported == 0)
+ return -EINVAL;
+
+ /* Find the the number of extcon cable */
+ for (i = 0; i < EXTCON_END; i++) {
+ if (!extcon_name[i])
+ continue;
+ if (!strncmp(extcon_name[i], name, CABLE_NAME_MAX)) {
+ id = i;
+ break;
+ }
+ }
+
+ if (id == EXTCON_NONE)
+ return -EINVAL;
+
+ return find_cable_index_by_id(edev, id);
+}
+
static ssize_t state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
if (edev->max_supported == 0)
return sprintf(buf, "%u\n", edev->state);
- for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
- if (!edev->supported_cable[i])
- break;
+ for (i = 0; i < edev->max_supported; i++) {
count += sprintf(buf + count, "%s=%d\n",
- edev->supported_cable[i],
+ extcon_name[edev->supported_cable[i]],
!!(edev->state & (1 << i)));
}
{
struct extcon_cable *cable = container_of(attr, struct extcon_cable,
attr_name);
+ int i = cable->cable_index;
return sprintf(buf, "%s\n",
- cable->edev->supported_cable[cable->cable_index]);
+ extcon_name[cable->edev->supported_cable[i]]);
}
static ssize_t cable_state_show(struct device *dev,
EXPORT_SYMBOL_GPL(extcon_set_state);
/**
- * extcon_find_cable_index() - Get the cable index based on the cable name.
+ * extcon_get_cable_state_() - Get the status of a specific cable.
* @edev: the extcon device that has the cable.
- * @cable_name: cable name to be searched.
- *
- * Note that accessing a cable state based on cable_index is faster than
- * cable_name because using cable_name induces a loop with strncmp().
- * Thus, when get/set_cable_state is repeatedly used, using cable_index
- * is recommended.
+ * @id: the unique id of each external connector in extcon enumeration.
*/
-int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
+int extcon_get_cable_state_(struct extcon_dev *edev, const enum extcon id)
{
- int i;
-
- if (edev->supported_cable) {
- for (i = 0; edev->supported_cable[i]; i++) {
- if (!strncmp(edev->supported_cable[i],
- cable_name, CABLE_NAME_MAX))
- return i;
- }
- }
+ int index;
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(extcon_find_cable_index);
+ index = find_cable_index_by_id(edev, id);
+ if (index < 0)
+ return index;
-/**
- * extcon_get_cable_state_() - Get the status of a specific cable.
- * @edev: the extcon device that has the cable.
- * @index: cable index that can be retrieved by extcon_find_cable_index().
- */
-int extcon_get_cable_state_(struct extcon_dev *edev, int index)
-{
- if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+ if (edev->max_supported && edev->max_supported <= index)
return -EINVAL;
return !!(edev->state & (1 << index));
*/
int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name)
{
- return extcon_get_cable_state_(edev, extcon_find_cable_index
+ return extcon_get_cable_state_(edev, find_cable_index_by_name
(edev, cable_name));
}
EXPORT_SYMBOL_GPL(extcon_get_cable_state);
/**
* extcon_set_cable_state_() - Set the status of a specific cable.
* @edev: the extcon device that has the cable.
- * @index: cable index that can be retrieved by
- * extcon_find_cable_index().
- * @cable_state: the new cable status. The default semantics is
+ * @id: the unique id of each external connector
+ * in extcon enumeration.
+ * @state: the new cable status. The default semantics is
* true: attached / false: detached.
*/
-int extcon_set_cable_state_(struct extcon_dev *edev,
- int index, bool cable_state)
+int extcon_set_cable_state_(struct extcon_dev *edev, enum extcon id,
+ bool cable_state)
{
u32 state;
+ int index;
- if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+ index = find_cable_index_by_id(edev, id);
+ if (index < 0)
+ return index;
+
+ if (edev->max_supported && edev->max_supported <= index)
return -EINVAL;
state = cable_state ? (1 << index) : 0;
int extcon_set_cable_state(struct extcon_dev *edev,
const char *cable_name, bool cable_state)
{
- return extcon_set_cable_state_(edev, extcon_find_cable_index
+ return extcon_set_cable_state_(edev, find_cable_index_by_name
(edev, cable_name), cable_state);
}
EXPORT_SYMBOL_GPL(extcon_set_cable_state);
if (!obj->edev)
return -ENODEV;
- obj->cable_index = extcon_find_cable_index(obj->edev,
- cable_name);
+ obj->cable_index = find_cable_index_by_name(obj->edev,
+ cable_name);
if (obj->cable_index < 0)
return obj->cable_index;
while ((dev = class_dev_iter_next(&iter))) {
extd = dev_get_drvdata(dev);
- if (extcon_find_cable_index(extd, cable_name) < 0)
+ if (find_cable_index_by_name(extd, cable_name) < 0)
continue;
class_dev_iter_exit(&iter);
/*
* extcon_dev_allocate() - Allocate the memory of extcon device.
- * @supported_cable: Array of supported cable names ending with NULL.
+ * @supported_cable: Array of supported extcon ending with EXTCON_NONE.
* If supported_cable is NULL, cable name related APIs
* are disabled.
*
*
* Return the pointer of extcon device if success or ERR_PTR(err) if fail
*/
-struct extcon_dev *extcon_dev_allocate(const char **supported_cable)
+struct extcon_dev *extcon_dev_allocate(const enum extcon *supported_cable)
{
struct extcon_dev *edev;
/**
* devm_extcon_dev_allocate - Allocate managed extcon device
* @dev: device owning the extcon device being created
- * @supported_cable: Array of supported cable names ending with NULL.
+ * @supported_cable: Array of supported extcon ending with EXTCON_NONE.
* If supported_cable is NULL, cable name related APIs
* are disabled.
*
* or ERR_PTR(err) if fail
*/
struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
- const char **supported_cable)
+ const enum extcon *supported_cable)
{
struct extcon_dev **ptr, *edev;
return ret;
}
- if (edev->supported_cable) {
- /* Get size of array */
- for (index = 0; edev->supported_cable[index]; index++)
- ;
- edev->max_supported = index;
- } else {
- edev->max_supported = 0;
- }
+ if (!edev->supported_cable)
+ return -EINVAL;
+
+ for (; edev->supported_cable[index] != EXTCON_NONE; index++);
+ edev->max_supported = index;
if (index > SUPPORTED_CABLE_MAX) {
- dev_err(&edev->dev, "extcon: maximum number of supported cables exceeded.\n");
+ dev_err(&edev->dev,
+ "exceed the maximum number of supported cables\n");
return -EINVAL;
}
}
module_exit(extcon_class_exit);
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
struct extcon_dev extcon;
};
-static const char *tahvo_cable[] = {
- "USB-HOST",
- "USB",
- NULL,
+static const enum extcon tahvo_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+
+ EXTCON_NONE,
};
static ssize_t vbus_state_show(struct device *device,
/*
* External connector (extcon) class driver
*
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
* Copyright (C) 2012 Samsung Electronics
* Author: Donggeun Kim <dg77.kim@samsung.com>
* Author: MyungJoo Ham <myungjoo.ham@samsung.com>
#include <linux/notifier.h>
#include <linux/sysfs.h>
-#define SUPPORTED_CABLE_MAX 32
-#define CABLE_NAME_MAX 30
-
-/*
- * The standard cable name is to help support general notifier
- * and notifiee device drivers to share the common names.
- * Please use standard cable names unless your notifier device has
- * a very unique and abnormal cable or
- * the cable type is supposed to be used with only one unique
- * pair of notifier/notifiee devices.
- *
- * Please add any other "standard" cables used with extcon dev.
- *
- * You may add a dot and number to specify version or specification
- * of the specific cable if it is required. (e.g., "Fast-charger.18"
- * and "Fast-charger.10" for 1.8A and 1.0A chargers)
- * However, the notifiee and notifier should be able to handle such
- * string and if the notifiee can negotiate the protocol or identify,
- * you don't need such convention. This convention is helpful when
- * notifier can distinguish but notifiee cannot.
- */
-enum extcon_cable_name {
- EXTCON_USB = 0,
- EXTCON_USB_HOST,
- EXTCON_TA, /* Travel Adaptor */
- EXTCON_FAST_CHARGER,
- EXTCON_SLOW_CHARGER,
- EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */
- EXTCON_HDMI,
- EXTCON_MHL,
- EXTCON_DVI,
- EXTCON_VGA,
- EXTCON_DOCK,
- EXTCON_LINE_IN,
- EXTCON_LINE_OUT,
- EXTCON_MIC_IN,
- EXTCON_HEADPHONE_OUT,
- EXTCON_SPDIF_IN,
- EXTCON_SPDIF_OUT,
- EXTCON_VIDEO_IN,
- EXTCON_VIDEO_OUT,
- EXTCON_MECHANICAL,
+enum extcon {
+ EXTCON_NONE = 0x0,
+
+ /* USB external connector */
+ EXTCON_USB = 0x1,
+ EXTCON_USB_HOST = 0x2,
+
+ /* Charger external connector */
+ EXTCON_TA = 0x10,
+ EXTCON_FAST_CHARGER = 0x11,
+ EXTCON_SLOW_CHARGER = 0x12,
+ EXTCON_CHARGE_DOWNSTREAM = 0x13,
+
+ /* Audio/Video external connector */
+ EXTCON_LINE_IN = 0x20,
+ EXTCON_LINE_OUT = 0x21,
+ EXTCON_MICROPHONE = 0x22,
+ EXTCON_HEADPHONE = 0x23,
+
+ EXTCON_HDMI = 0x30,
+ EXTCON_MHL = 0x31,
+ EXTCON_DVI = 0x32,
+ EXTCON_VGA = 0x33,
+ EXTCON_SPDIF_IN = 0x34,
+ EXTCON_SPDIF_OUT = 0x35,
+ EXTCON_VIDEO_IN = 0x36,
+ EXTCON_VIDEO_OUT = 0x37,
+
+ /* Etc external connector */
+ EXTCON_DOCK = 0x50,
+ EXTCON_JIG = 0x51,
+ EXTCON_MECHANICAL = 0x52,
+
+ EXTCON_END,
};
-extern const char extcon_cable_name[][CABLE_NAME_MAX + 1];
struct extcon_cable;
* struct extcon_dev - An extcon device represents one external connector.
* @name: The name of this extcon device. Parent device name is
* used if NULL.
- * @supported_cable: Array of supported cable names ending with NULL.
+ * @supported_cable: Array of supported cable names ending with EXTCON_NONE.
* If supported_cable is NULL, cable name related APIs
* are disabled.
* @mutually_exclusive: Array of mutually exclusive set of cables that cannot
struct extcon_dev {
/* Optional user initializing data */
const char *name;
- const char **supported_cable;
+ const enum extcon *supported_cable;
const u32 *mutually_exclusive;
/* Optional callbacks to override class functions */
/*
* Following APIs control the memory of extcon device.
*/
-extern struct extcon_dev *extcon_dev_allocate(const char **cables);
+extern struct extcon_dev *extcon_dev_allocate(const enum extcon *cable);
extern void extcon_dev_free(struct extcon_dev *edev);
extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
- const char **cables);
+ const enum extcon *cable);
extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
/*
/*
* get/set_cable_state access each bit of the 32b encoded state value.
- * They are used to access the status of each cable based on the cable_name
- * or cable_index, which is retrieved by extcon_find_cable_index
+ * They are used to access the status of each cable based on the cable_name.
*/
-extern int extcon_find_cable_index(struct extcon_dev *sdev,
- const char *cable_name);
-extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index);
-extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index,
+extern int extcon_get_cable_state_(struct extcon_dev *edev, enum extcon id);
+extern int extcon_set_cable_state_(struct extcon_dev *edev, enum extcon id,
bool cable_state);
extern int extcon_get_cable_state(struct extcon_dev *edev,
static inline void devm_extcon_dev_unregister(struct device *dev,
struct extcon_dev *edev) { }
-static inline struct extcon_dev *extcon_dev_allocate(const char **cables)
+static inline struct extcon_dev *extcon_dev_allocate(const enum extcon *cable)
{
return ERR_PTR(-ENOSYS);
}
static inline void extcon_dev_free(struct extcon_dev *edev) { }
static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
- const char **cables)
+ const enum extcon *cable)
{
return ERR_PTR(-ENOSYS);
}
return 0;
}
-static inline int extcon_find_cable_index(struct extcon_dev *edev,
- const char *cable_name)
-{
- return 0;
-}
-
static inline int extcon_get_cable_state_(struct extcon_dev *edev,
- int cable_index)
+ enum extcon id)
{
return 0;
}
static inline int extcon_set_cable_state_(struct extcon_dev *edev,
- int cable_index, bool cable_state)
+ enum extcon id, bool cable_state)
{
return 0;
}
* @consumer_channel: Unique name to identify the channel on the consumer
* side. This typically describes the channels used within
* the consumer. E.g. 'battery_voltage'
- * @cable_names: array of cable names ending with null.
+ * @cable_names: array of extcon id for supported cables.
* @adc_contitions: array of struct adc_jack_cond conditions ending
* with .state = 0 entry. This describes how to decode
* adc values into extcon state.
const char *name;
const char *consumer_channel;
- /* The last entry should be NULL */
- const char **cable_names;
+ const enum extcon *cable_names;
/* The last entry's state should be 0 */
struct adc_jack_cond *adc_conditions;
projects / platform / kernel / linux-exynos.git / commitdiff