sdhci: Advertise 2.0v supply on SDIO host controller
authorAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Thu, 11 Jan 2018 13:51:58 +0000 (15:51 +0200)
committerUlf Hansson <ulf.hansson@linaro.org>
Thu, 11 Jan 2018 14:51:09 +0000 (15:51 +0100)
On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO,
requires 2.0v, while the host, according to Intel Merrifield TRM,
supports 1.8v supply only.

The card announces itself as

  mmc2: new ultra high speed DDR50 SDIO card at address 0001

Introduce a custom OCR mask for SDIO host controller on Intel Merrifield
and add a special case to sdhci_set_power_noreg() to override 2.0v supply
by enforcing 1.8v power choice.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
drivers/mmc/host/sdhci-pci-core.c
drivers/mmc/host/sdhci.c

index c5b229b..00fa7a3 100644 (file)
@@ -930,6 +930,8 @@ static int intel_mrfld_mmc_probe_slot(struct sdhci_pci_slot *slot)
                slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
                break;
        case INTEL_MRFLD_SDIO:
+               /* Advertise 2.0v for compatibility with the SDIO card's OCR */
+               slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195;
                slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE |
                                         MMC_CAP_POWER_OFF_CARD;
                break;
index e9290a3..80b1a59 100644 (file)
@@ -1434,6 +1434,13 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
        if (mode != MMC_POWER_OFF) {
                switch (1 << vdd) {
                case MMC_VDD_165_195:
+               /*
+                * Without a regulator, SDHCI does not support 2.0v
+                * so we only get here if the driver deliberately
+                * added the 2.0v range to ocr_avail. Map it to 1.8v
+                * for the purpose of turning on the power.
+                */
+               case MMC_VDD_20_21:
                        pwr = SDHCI_POWER_180;
                        break;
                case MMC_VDD_29_30: