net: dsa: felix: re-enable TAS guard band mode

Commit 316bcffe4479 ("net: dsa: felix: disable always guard band bit for
TAS config") disabled the guard band and broke 802.3Qbv compliance.

There are two issues here:
 (1) Without the guard band the end of the scheduling window could be
     overrun by a frame in transit.
 (2) Frames that don't fit into a configured window will still be sent.

The reason for both issues is that the switch will schedule the _start_
of a frame transmission inside the predefined window without taking the
length of the frame into account. Thus, we'll need the guard band which
will close the gate early, so that a complete frame can still be sent.
Revert the commit and add a note.

For a lengthy discussion see [1].

[1] https://lore.kernel.org/netdev/c7618025da6723418c56a54fe4683bd7@walle.cc/

Fixes: 316bcffe4479 ("net: dsa: felix: disable always guard band bit for TAS config")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 2473bebe48e6ee19af24890f9b5d4f57f96516ac..f966a253d1c77a9aa6af3b6f27327e61c9951d56 100644 (file)
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1227,12 +1227,17 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
        if (taprio->num_entries > VSC9959_TAS_GCL_ENTRY_MAX)
                return -ERANGE;
 
-       /* Set port num and disable ALWAYS_GUARD_BAND_SCH_Q, which means set
-        * guard band to be implemented for nonschedule queues to schedule
-        * queues transition.
+       /* Enable guard band. The switch will schedule frames without taking
+        * their length into account. Thus we'll always need to enable the
+        * guard band which reserves the time of a maximum sized frame at the
+        * end of the time window.
+        *
+        * Although the ALWAYS_GUARD_BAND_SCH_Q bit is global for all ports, we
+        * need to set PORT_NUM, because subsequent writes to PARAM_CFG_REG_n
+        * operate on the port number.
         */
-       ocelot_rmw(ocelot,
-                  QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port),
+       ocelot_rmw(ocelot, QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port) |
+                  QSYS_TAS_PARAM_CFG_CTRL_ALWAYS_GUARD_BAND_SCH_Q,
                   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM_M |
                   QSYS_TAS_PARAM_CFG_CTRL_ALWAYS_GUARD_BAND_SCH_Q,
                   QSYS_TAS_PARAM_CFG_CTRL);