arm64: zynqmp: Use ethernet-phy as node name for ethernet phys

Ethernet phys based on devicetree specification should be using
ethernet-phy@ node name instead of pure phy@.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
index ae834bc..6e5a0d2 100644 (file)
--- a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
@@ -58,7 +58,7 @@
        phy-handle = <&phy0>;
        phy-mode = "sgmii";
        is-internal-pcspma;
-       phy0: phy@0 { /* marwell m88e1512 */
+       phy0: ethernet-phy@0 { /* marwell m88e1512 */
                reg = <0>;
                reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
 /*             xlnx,phy-type = <PHY_TYPE_SGMII>; */

diff --git a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
index 65eeea1..8894914 100644 (file)
--- a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
@@ -89,7 +89,7 @@
        phy-handle = <&phy0>;
        phy-mode = "sgmii"; /* DTG generates this properly  1512 */
        phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>;
-       phy0: phy@0 { /* marwell m88e1512 - SGMII */
+       phy0: ethernet-phy@0 { /* marwell m88e1512 - SGMII */
                reg = <0>;
 /*             xlnx,phy-type = <PHY_TYPE_SGMII>; */
        };

diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
index f49da81..04d5fc9 100644 (file)
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
@@ -76,7 +76,7 @@
        phy-mode = "sgmii"; /* DTG generates this properly  1512 */
        is-internal-pcspma;
        /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
-       phy0: phy@0 {
+       phy0: ethernet-phy@0 {
                reg = <0>;
        };
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index 8824f5c..bb6a94e 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -75,7 +75,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@0 {
+       phy0: ethernet-phy@0 {
                reg = <0>;
        };
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index afa90a8..b8cc5ed 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -85,7 +85,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@5 {
+       phy0: ethernet-phy@5 {
                reg = <5>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
index d6a0103..2ead8dd 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
@@ -76,7 +76,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@0 { /* VSC8211 */
+       phy0: ethernet-phy@0 { /* VSC8211 */
                reg = <0>;
        };
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
index 0632b18..12c0173 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -73,7 +73,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@0 {
+       phy0: ethernet-phy@0 {
                reg = <0>;
        };
 };

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 6e22871..e2a49a6 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -110,7 +110,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@21 {
+       phy0: ethernet-phy@21 {
                reg = <21>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index af4d868..08a4887 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -16,7 +16,7 @@
 
 &gem3 {
        phy-handle = <&phyc>;
-       phyc: phy@c {
+       phyc: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index c7a3cdc..3e63765 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -54,7 +54,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@c {
+       phy0: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index 7df16b0..8d8cabf 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -55,7 +55,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@c {
+       phy0: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 9fd3953..74d501d 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -110,7 +110,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@c {
+       phy0: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;

diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 2e28a39..d23e4ea 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -106,7 +106,7 @@
        status = "okay";
        phy-handle = <&phy0>;
        phy-mode = "rgmii-id";
-       phy0: phy@c {
+       phy0: ethernet-phy@c {
                reg = <0xc>;
                ti,rx-internal-delay = <0x8>;
                ti,tx-internal-delay = <0xa>;