#include "et1310_rx.h"
#include "et131x.h"
-void nic_return_rfd(struct et131x_adapter *etdev, struct rfd *rfd);
+static inline u32 bump_fbr(u32 *fbr, u32 limit)
+{
+ u32 v = *fbr;
+ v++;
+ /* This works for all cases where limit < 1024. The 1023 case
+ works because 1023++ is 1024 which means the if condition is not
+ taken but the carry of the bit into the wrap bit toggles the wrap
+ value correctly */
+ if ((v & ET_DMA10_MASK) > limit) {
+ v &= ~ET_DMA10_MASK;
+ v ^= ET_DMA10_WRAP;
+ }
+ /* For the 1023 case */
+ v &= (ET_DMA10_MASK|ET_DMA10_WRAP);
+ *fbr = v;
+ return v;
+}
/**
* et131x_rx_dma_memory_alloc
&rx_ring->Fbr1MemPa[i]);
if (!rx_ring->Fbr1MemVa[i]) {
- dev_err(&adapter->pdev->dev,
+ dev_err(&adapter->pdev->dev,
"Could not alloc memory\n");
return -ENOMEM;
}
/* Free Packet Status Ring */
if (rx_ring->pPSRingVa) {
pktStatRingSize =
- sizeof(struct pkt_stat_desc) * adapter->rx_ring.PsrNumEntries;
+ sizeof(struct pkt_stat_desc) * adapter->rx_ring.PsrNumEntries;
pci_free_consistent(adapter->pdev, pktStatRingSize,
rx_ring->pPSRingVa, rx_ring->pPSRingPa);
}
/**
+ * NICReturnRFD - Recycle a RFD and put it back onto the receive list
+ * @etdev: pointer to our adapter
+ * @rfd: pointer to the RFD
+ */
+void nic_return_rfd(struct et131x_adapter *etdev, struct rfd *rfd)
+{
+ struct rx_ring *rx_local = &etdev->rx_ring;
+ struct rxdma_regs __iomem *rx_dma = &etdev->regs->rxdma;
+ u16 bi = rfd->bufferindex;
+ u8 ri = rfd->ringindex;
+ unsigned long flags;
+
+ /* We don't use any of the OOB data besides status. Otherwise, we
+ * need to clean up OOB data
+ */
+ if (
+#ifdef USE_FBR0
+ (ri == 0 && bi < rx_local->Fbr0NumEntries) ||
+#endif
+ (ri == 1 && bi < rx_local->Fbr1NumEntries)) {
+ spin_lock_irqsave(&etdev->FbrLock, flags);
+
+ if (ri == 1) {
+ struct fbr_desc *next =
+ (struct fbr_desc *) (rx_local->pFbr1RingVa) +
+ INDEX10(rx_local->local_Fbr1_full);
+
+ /* Handle the Free Buffer Ring advancement here. Write
+ * the PA / Buffer Index for the returned buffer into
+ * the oldest (next to be freed)FBR entry
+ */
+ next->addr_hi = rx_local->fbr[1]->bus_high[bi];
+ next->addr_lo = rx_local->fbr[1]->bus_low[bi];
+ next->word2 = bi;
+
+ writel(bump_fbr(&rx_local->local_Fbr1_full,
+ rx_local->Fbr1NumEntries - 1),
+ &rx_dma->fbr1_full_offset);
+ }
+#ifdef USE_FBR0
+ else {
+ struct fbr_desc *next = (struct fbr_desc *)
+ rx_local->pFbr0RingVa +
+ INDEX10(rx_local->local_Fbr0_full);
+
+ /* Handle the Free Buffer Ring advancement here. Write
+ * the PA / Buffer Index for the returned buffer into
+ * the oldest (next to be freed) FBR entry
+ */
+ next->addr_hi = rx_local->fbr[0]->bus_high[bi];
+ next->addr_lo = rx_local->fbr[0]->bus_low[bi];
+ next->word2 = bi;
+
+ writel(bump_fbr(&rx_local->local_Fbr0_full,
+ rx_local->Fbr0NumEntries - 1),
+ &rx_dma->fbr0_full_offset);
+ }
+#endif
+ spin_unlock_irqrestore(&etdev->FbrLock, flags);
+ } else {
+ dev_err(&etdev->pdev->dev,
+ "NICReturnRFD illegal Buffer Index returned\n");
+ }
+
+ /* The processing on this RFD is done, so put it back on the tail of
+ * our list
+ */
+ spin_lock_irqsave(&etdev->rcv_lock, flags);
+ list_add_tail(&rfd->list_node, &rx_local->RecvList);
+ rx_local->nReadyRecv++;
+ spin_unlock_irqrestore(&etdev->rcv_lock, flags);
+
+ WARN_ON(rx_local->nReadyRecv > rx_local->NumRfd);
+}
+
+/**
* et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310
* @etdev: pointer to our adapter structure
*/
* the packet to it, puts the RFD in the RecvPendList, and also returns
* the pointer to the RFD.
*/
-struct rfd * nic_rx_pkts(struct et131x_adapter *etdev)
+struct rfd *nic_rx_pkts(struct et131x_adapter *etdev)
{
struct rx_ring *rx_local = &etdev->rx_ring;
struct rx_status_block *status;
etdev->rx_ring.UnfinishedReceives = false;
}
-static inline u32 bump_fbr(u32 *fbr, u32 limit)
-{
- u32 v = *fbr;
- v++;
- /* This works for all cases where limit < 1024. The 1023 case
- works because 1023++ is 1024 which means the if condition is not
- taken but the carry of the bit into the wrap bit toggles the wrap
- value correctly */
- if ((v & ET_DMA10_MASK) > limit) {
- v &= ~ET_DMA10_MASK;
- v ^= ET_DMA10_WRAP;
- }
- /* For the 1023 case */
- v &= (ET_DMA10_MASK|ET_DMA10_WRAP);
- *fbr = v;
- return v;
-}
-
-/**
- * NICReturnRFD - Recycle a RFD and put it back onto the receive list
- * @etdev: pointer to our adapter
- * @rfd: pointer to the RFD
- */
-void nic_return_rfd(struct et131x_adapter *etdev, struct rfd *rfd)
-{
- struct rx_ring *rx_local = &etdev->rx_ring;
- struct rxdma_regs __iomem *rx_dma = &etdev->regs->rxdma;
- u16 bi = rfd->bufferindex;
- u8 ri = rfd->ringindex;
- unsigned long flags;
-
- /* We don't use any of the OOB data besides status. Otherwise, we
- * need to clean up OOB data
- */
- if (
-#ifdef USE_FBR0
- (ri == 0 && bi < rx_local->Fbr0NumEntries) ||
-#endif
- (ri == 1 && bi < rx_local->Fbr1NumEntries)) {
- spin_lock_irqsave(&etdev->FbrLock, flags);
-
- if (ri == 1) {
- struct fbr_desc *next =
- (struct fbr_desc *) (rx_local->pFbr1RingVa) +
- INDEX10(rx_local->local_Fbr1_full);
-
- /* Handle the Free Buffer Ring advancement here. Write
- * the PA / Buffer Index for the returned buffer into
- * the oldest (next to be freed)FBR entry
- */
- next->addr_hi = rx_local->fbr[1]->bus_high[bi];
- next->addr_lo = rx_local->fbr[1]->bus_low[bi];
- next->word2 = bi;
-
- writel(bump_fbr(&rx_local->local_Fbr1_full,
- rx_local->Fbr1NumEntries - 1),
- &rx_dma->fbr1_full_offset);
- }
-#ifdef USE_FBR0
- else {
- struct fbr_desc *next = (struct fbr_desc *)
- rx_local->pFbr0RingVa +
- INDEX10(rx_local->local_Fbr0_full);
-
- /* Handle the Free Buffer Ring advancement here. Write
- * the PA / Buffer Index for the returned buffer into
- * the oldest (next to be freed) FBR entry
- */
- next->addr_hi = rx_local->fbr[0]->bus_high[bi];
- next->addr_lo = rx_local->fbr[0]->bus_low[bi];
- next->word2 = bi;
-
- writel(bump_fbr(&rx_local->local_Fbr0_full,
- rx_local->Fbr0NumEntries - 1),
- &rx_dma->fbr0_full_offset);
- }
-#endif
- spin_unlock_irqrestore(&etdev->FbrLock, flags);
- } else {
- dev_err(&etdev->pdev->dev,
- "NICReturnRFD illegal Buffer Index returned\n");
- }
-
- /* The processing on this RFD is done, so put it back on the tail of
- * our list
- */
- spin_lock_irqsave(&etdev->rcv_lock, flags);
- list_add_tail(&rfd->list_node, &rx_local->RecvList);
- rx_local->nReadyRecv++;
- spin_unlock_irqrestore(&etdev->rcv_lock, flags);
-
- WARN_ON(rx_local->nReadyRecv > rx_local->NumRfd);
-}