#include <linux/mmiotrace.h>
static unsigned long mmio_address;
-module_param(mmio_address, ulong, 0);
+module_param_hw(mmio_address, ulong, iomem, 0);
MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB "
"(or 8 MB if read_far is non-zero).");
static unsigned int irq = 0; /* interrupt number IRQ */
static unsigned long mem = 0; /* physical segment of board */
-module_param(irq, uint, 0);
+module_param_hw(irq, uint, irq, 0);
MODULE_PARM_DESC(irq, "IRQ of the Applicom board");
-module_param(mem, ulong, 0);
+module_param_hw(mem, ulong, iomem, 0);
MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board");
static unsigned int numboards; /* number of installed boards */
" interface separated by commas. The types are 'kcs',"
" 'smic', and 'bt'. For example si_type=kcs,bt will set"
" the first interface to kcs and the second to bt");
-module_param_array(addrs, ulong, &num_addrs, 0);
+module_param_hw_array(addrs, ulong, iomem, &num_addrs, 0);
MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
" addresses separated by commas. Only use if an interface"
" is in memory. Otherwise, set it to zero or leave"
" it blank.");
-module_param_array(ports, uint, &num_ports, 0);
+module_param_hw_array(ports, uint, ioport, &num_ports, 0);
MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
" addresses separated by commas. Only use if an interface"
" is a port. Otherwise, set it to zero or leave"
" it blank.");
-module_param_array(irqs, int, &num_irqs, 0);
+module_param_hw_array(irqs, int, irq, &num_irqs, 0);
MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
" addresses separated by commas. Only use if an interface"
" has an interrupt. Otherwise, set it to zero or leave"
" it blank.");
-module_param_array(regspacings, int, &num_regspacings, 0);
+module_param_hw_array(regspacings, int, other, &num_regspacings, 0);
MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
" and each successive register used by the interface. For"
" instance, if the start address is 0xca2 and the spacing"
" is 2, then the second address is at 0xca4. Defaults"
" to 1.");
-module_param_array(regsizes, int, &num_regsizes, 0);
+module_param_hw_array(regsizes, int, other, &num_regsizes, 0);
MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
" This should generally be 1, 2, 4, or 8 for an 8-bit,"
" 16-bit, 32-bit, or 64-bit register. Use this if you"
" the 8-bit IPMI register has to be read from a larger"
" register.");
-module_param_array(regshifts, int, &num_regshifts, 0);
+module_param_hw_array(regshifts, int, other, &num_regshifts, 0);
MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
" IPMI register, in bits. For instance, if the data"
" is read from a 32-bit word and the IPMI data is in"
" bit 8-15, then the shift would be 8");
-module_param_array(slave_addrs, int, &num_slave_addrs, 0);
+module_param_hw_array(slave_addrs, int, other, &num_slave_addrs, 0);
MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
" the controller. Normally this is 0x20, but can be"
" overridden by this parm. This is an array indexed"
int mwave_uart_irq = 0;
int mwave_uart_io = 0;
module_param(mwave_debug, int, 0);
-module_param(mwave_3780i_irq, int, 0);
-module_param(mwave_3780i_io, int, 0);
-module_param(mwave_uart_irq, int, 0);
-module_param(mwave_uart_io, int, 0);
+module_param_hw(mwave_3780i_irq, int, irq, 0);
+module_param_hw(mwave_3780i_io, int, ioport, 0);
+module_param_hw(mwave_uart_irq, int, irq, 0);
+module_param_hw(mwave_uart_io, int, ioport, 0);
static int mwave_open(struct inode *inode, struct file *file);
static int mwave_close(struct inode *inode, struct file *file);
#define DRV_NAME "cs5535-clockevt"
static int timer_irq;
-module_param_named(irq, timer_irq, int, 0644);
+module_param_hw_named(irq, timer_irq, int, irq, 0644);
MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks.");
/*
cpufreq_unregister_driver(&speedstep_driver);
}
-module_param(smi_port, int, 0444);
+module_param_hw(smi_port, int, ioport, 0444);
module_param(smi_cmd, int, 0444);
module_param(smi_sig, uint, 0444);
static unsigned int base[MAX_NUM_DIO48E];
static unsigned int num_dio48e;
-module_param_array(base, uint, &num_dio48e, 0);
+module_param_hw_array(base, uint, ioport, &num_dio48e, 0);
MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses");
static unsigned int irq[MAX_NUM_DIO48E];
-module_param_array(irq, uint, NULL, 0);
+module_param_hw_array(irq, uint, irq, NULL, 0);
MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers");
/**
static unsigned int base[MAX_NUM_IDI_48];
static unsigned int num_idi_48;
-module_param_array(base, uint, &num_idi_48, 0);
+module_param_hw_array(base, uint, ioport, &num_idi_48, 0);
MODULE_PARM_DESC(base, "ACCES 104-IDI-48 base addresses");
static unsigned int irq[MAX_NUM_IDI_48];
-module_param_array(irq, uint, NULL, 0);
+module_param_hw_array(irq, uint, irq, NULL, 0);
MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers");
/**
static unsigned int base[MAX_NUM_IDIO_16];
static unsigned int num_idio_16;
-module_param_array(base, uint, &num_idio_16, 0);
+module_param_hw_array(base, uint, ioport, &num_idio_16, 0);
MODULE_PARM_DESC(base, "ACCES 104-IDIO-16 base addresses");
static unsigned int irq[MAX_NUM_IDIO_16];
-module_param_array(irq, uint, NULL, 0);
+module_param_hw_array(irq, uint, irq, NULL, 0);
MODULE_PARM_DESC(irq, "ACCES 104-IDIO-16 interrupt line numbers");
/**
static unsigned int base[MAX_NUM_GPIOMM];
static unsigned int num_gpiomm;
-module_param_array(base, uint, &num_gpiomm, 0);
+module_param_hw_array(base, uint, ioport, &num_gpiomm, 0);
MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses");
/**
static unsigned int base[MAX_NUM_WS16C48];
static unsigned int num_ws16c48;
-module_param_array(base, uint, &num_ws16c48, 0);
+module_param_hw_array(base, uint, ioport, &num_ws16c48, 0);
MODULE_PARM_DESC(base, "WinSystems WS16C48 base addresses");
static unsigned int irq[MAX_NUM_WS16C48];
-module_param_array(irq, uint, NULL, 0);
+module_param_hw_array(irq, uint, irq, NULL, 0);
MODULE_PARM_DESC(irq, "WinSystems WS16C48 interrupt line numbers");
/**
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
static u16 force_addr;
-module_param(force_addr, ushort, 0);
+module_param_hw(force_addr, ushort, ioport, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the i2c controller");
MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter");
MODULE_LICENSE("GPL");
-module_param(base, int, 0);
-module_param(irq, int, 0);
+module_param_hw(base, int, ioport_or_iomem, 0);
+module_param_hw(irq, int, irq, 0);
module_param(clock, int, 0);
module_param(own, int, 0);
-module_param(mmapped, int, 0);
+module_param_hw(mmapped, int, other, 0);
module_isa_driver(i2c_elektor_driver, 1);
static struct platform_device *pdev;
static u16 base;
-module_param(base, ushort, 0);
+module_param_hw(base, ushort, ioport, 0);
MODULE_PARM_DESC(base, "Base I/O address");
static int irq;
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "IRQ (optional)");
/* ----- Low-level parallel port access ----------------------------------- */
MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver");
MODULE_LICENSE("GPL");
-module_param(base, ulong, 0);
+module_param_hw(base, ulong, ioport, 0);
MODULE_PARM_DESC(base, "I/O base address");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "IRQ");
module_param(clock, int, 0);
MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t"
/* If force_addr is set to anything different from 0, we forcibly enable
the PIIX4 at the given address. VERY DANGEROUS! */
static int force_addr;
-module_param (force_addr, int, 0);
+module_param_hw(force_addr, int, ioport, 0);
MODULE_PARM_DESC(force_addr,
"Forcibly enable the PIIX4 at the given address. "
"EXTREMELY DANGEROUS!");
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
static u16 force_addr;
-module_param(force_addr, ushort, 0);
+module_param_hw(force_addr, ushort, ioport, 0);
MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
static struct pci_driver sis5595_driver;
/* If force_addr is set to anything different from 0, we forcibly enable
the VT596 at the given address. VERY DANGEROUS! */
static u16 force_addr;
-module_param(force_addr, ushort, 0);
+module_param_hw(force_addr, ushort, ioport, 0);
MODULE_PARM_DESC(force_addr,
"Forcibly enable the SMBus at the given address. "
"EXTREMELY DANGEROUS!");
#define MAX_DEVICES 4
static int base[MAX_DEVICES] = { 0x820, 0x840 };
-module_param_array(base, int, NULL, 0);
+module_param_hw_array(base, int, ioport, NULL, 0);
MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
#define POLL_TIMEOUT (HZ/5)
static unsigned int base[max_num_isa_dev(STX104_EXTENT)];
static unsigned int num_stx104;
-module_param_array(base, uint, &num_stx104, 0);
+module_param_hw_array(base, uint, ioport, &num_stx104, 0);
MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
/**
static unsigned int base[max_num_isa_dev(CIO_DAC_EXTENT)];
static unsigned int num_cio_dac;
-module_param_array(base, uint, &num_cio_dac, 0);
+module_param_hw_array(base, uint, ioport, &num_cio_dac, 0);
MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses");
/**
#define INPORT_IRQ 5
static int inport_irq = INPORT_IRQ;
-module_param_named(irq, inport_irq, uint, 0);
+module_param_hw_named(irq, inport_irq, uint, irq, 0);
MODULE_PARM_DESC(irq, "IRQ number (5=default)");
static struct input_dev *inport_dev;
#define LOGIBM_IRQ 5
static int logibm_irq = LOGIBM_IRQ;
-module_param_named(irq, logibm_irq, uint, 0);
+module_param_hw_named(irq, logibm_irq, uint, irq, 0);
MODULE_PARM_DESC(irq, "IRQ number (5=default)");
static struct input_dev *logibm_dev;
MODULE_LICENSE("GPL");
static unsigned int mk712_io = 0x260; /* Also 0x200, 0x208, 0x300 */
-module_param_named(io, mk712_io, uint, 0);
+module_param_hw_named(io, mk712_io, uint, ioport, 0);
MODULE_PARM_DESC(io, "I/O base address of MK712 touchscreen controller");
static unsigned int mk712_irq = 10; /* Also 12, 14, 15 */
-module_param_named(irq, mk712_irq, uint, 0);
+module_param_hw_named(irq, mk712_irq, uint, irq, 0);
MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller");
/* eight 8-bit registers */
static int io[MAX_CARDS];
static int irq[MAX_CARDS];
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(io, "I/O base address(es)");
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
static int irq[MAX_CARDS];
static int cardnr[MAX_CARDS];
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param_array(cardnr, int, NULL, 0);
MODULE_PARM_DESC(io, "I/O base address(es)");
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
MODULE_LICENSE("GPL");
module_param_array(type, int, NULL, 0);
module_param_array(protocol, int, NULL, 0);
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(mem, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
+module_param_hw_array(mem, int, iomem, NULL, 0);
module_param(id, charp, 0);
#ifdef IO0_IO1
-module_param_array(io0, int, NULL, 0);
-module_param_array(io1, int, NULL, 0);
+module_param_hw_array(io0, int, ioport, NULL, 0);
+module_param_hw_array(io1, int, ioport, NULL, 0);
#endif
#endif /* MODULE */
*/
static unsigned long vidmem; /* default = 0 - Video memory base address */
-module_param(vidmem, ulong, 0444);
+module_param_hw(vidmem, ulong, iomem, 0444);
MODULE_PARM_DESC(vidmem, "Default video memory base address");
/*
module_param(type, int, 0444);
MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug");
-module_param(io, int, 0444);
+module_param_hw(io, int, ioport, 0444);
MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
/* some architectures (e.g. intel xscale) have memory mapped registers */
-module_param(iommap, ulong, 0444);
+module_param_hw(iommap, ulong, other, 0444);
MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory mapped io)");
/*
* on 32bit word boundaries.
* See linux-kernel/drivers/tty/serial/8250/8250.c serial_in()/out()
*/
-module_param(ioshift, int, 0444);
+module_param_hw(ioshift, int, other, 0444);
MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)");
-module_param(irq, int, 0444);
+module_param_hw(irq, int, irq, 0444);
MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
-module_param(share_irq, bool, 0444);
+module_param_hw(share_irq, bool, other, 0444);
MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)");
module_param(sense, int, 0444);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jiri Kosina");
-module_param(irq, uint, 0444);
+module_param_hw(irq, uint, irq, 0444);
MODULE_PARM_DESC(irq, "The IRQ to register for");
MODULE_DESCRIPTION("Dummy IRQ handler driver");
module_init(wbsd_drv_init);
module_exit(wbsd_drv_exit);
#ifdef CONFIG_PNP
-module_param_named(nopnp, param_nopnp, uint, 0444);
+module_param_hw_named(nopnp, param_nopnp, uint, other, 0444);
#endif
-module_param_named(io, param_io, uint, 0444);
-module_param_named(irq, param_irq, uint, 0444);
-module_param_named(dma, param_dma, int, 0444);
+module_param_hw_named(io, param_io, uint, ioport, 0444);
+module_param_hw_named(irq, param_irq, uint, irq, 0444);
+module_param_hw_named(dma, param_dma, int, dma, 0444);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
static struct net_device *cops_dev;
MODULE_LICENSE("GPL");
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(board_type, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(board_type, int, other, 0);
static int __init cops_module_init(void)
{
MODULE_LICENSE("GPL");
module_param(debug, int, 0);
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(dma, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(dma, int, dma, 0);
static int __init ltpc_module_init(void)
static int clockm = 0;
module_param(node, int, 0);
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
module_param_string(device, device, sizeof(device), 0);
module_param(timeout, int, 0);
module_param(backplane, int, 0);
static int irq;
static char device[9]; /* use eg. device=arc1 to change name */
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
module_param_string(device, device, sizeof(device), 0);
MODULE_LICENSE("GPL");
static int shmem;
static char device[9]; /* use eg. device=arc1 to change name */
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
module_param(shmem, int, 0);
module_param_string(device, device, sizeof(device), 0);
static u8 bcr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
-module_param_array(port, ulong, NULL, S_IRUGO);
+module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
MODULE_PARM_DESC(port, "I/O port number");
-module_param_array(mem, ulong, NULL, S_IRUGO);
+module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
MODULE_PARM_DESC(mem, "I/O memory address");
-module_param_array(indirect, int, NULL, S_IRUGO);
+module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
-module_param_array(irq, int, NULL, S_IRUGO);
+module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
MODULE_PARM_DESC(irq, "IRQ number");
module_param_array(clk, int, NULL, S_IRUGO);
static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
static spinlock_t indirect_lock[MAXDEV]; /* lock for indirect access mode */
-module_param_array(port, ulong, NULL, S_IRUGO);
+module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
MODULE_PARM_DESC(port, "I/O port number");
-module_param_array(mem, ulong, NULL, S_IRUGO);
+module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
MODULE_PARM_DESC(mem, "I/O memory address");
-module_param_array(indirect, int, NULL, S_IRUGO);
+module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
-module_param_array(irq, int, NULL, S_IRUGO);
+module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
MODULE_PARM_DESC(irq, "IRQ number");
module_param_array(clk, int, NULL, S_IRUGO);
#endif /* CONFIG_PM */
module_param(debug,int, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param(max_interrupt_work, int, 0);
MODULE_PARM_DESC(debug, "debug level (0-6)");
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
module_param_array(enable_wol, int, NULL, 0);
module_param(rx_copybreak, int, 0);
module_param(max_interrupt_work, int, 0);
-module_param(compaq_ioaddr, int, 0);
-module_param(compaq_irq, int, 0);
+module_param_hw(compaq_ioaddr, int, ioport, 0);
+module_param_hw(compaq_irq, int, irq, 0);
module_param(compaq_device_id, int, 0);
module_param(watchdog, int, 0);
module_param(global_use_mmio, int, 0);
static u32 ne_msg_enable;
#ifdef MODULE
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param_array(bad, int, NULL, 0);
module_param_named(msg_enable, ne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
MODULE_PARM_DESC(io, "I/O base address(es),required");
static int io[MAX_ULTRA_CARDS];
static int irq[MAX_ULTRA_CARDS];
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
MODULE_PARM_DESC(io, "I/O base address(es)");
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
static int mem[MAX_WD_CARDS];
static int mem_end[MAX_WD_CARDS]; /* for non std. mem size */
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(mem, int, NULL, 0);
-module_param_array(mem_end, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
+module_param_hw_array(mem, int, iomem, NULL, 0);
+module_param_hw_array(mem_end, int, iomem, NULL, 0);
module_param_named(msg_enable, wd_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
MODULE_PARM_DESC(io, "I/O base address(es)");
MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)");
static int dma[MAX_CARDS];
static int irq[MAX_CARDS];
-module_param_array(io, int, NULL, 0);
-module_param_array(dma, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param(lance_debug, int, 0);
MODULE_PARM_DESC(io, "LANCE/PCnet I/O base address(es),required");
MODULE_PARM_DESC(dma, "LANCE/PCnet ISA DMA channel (ignored for some devices)");
#ifdef MODULE
static struct net_device *dev_ni65;
-module_param(irq, int, 0);
-module_param(io, int, 0);
-module_param(dma, int, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(dma, int, dma, 0);
MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)");
MODULE_PARM_DESC(io, "ni6510 I/O base address");
MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)");
static int dma;
static int dmasize = 16; /* or 64 */
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
module_param(debug, int, 0);
module_param_string(media, media, sizeof(media), 0);
module_param(duplex, int, 0);
-module_param(dma , int, 0);
+module_param_hw(dma , int, dma, 0);
module_param(dmasize , int, 0);
module_param(use_dma , int, 0);
MODULE_PARM_DESC(io, "cs89x0 I/O base address");
static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
module_param(de4x5_debug, int, 0);
module_param(dec_only, int, 0);
module_param(args, charp, 0);
#define HP100_DEVICES 5
/* Parameters set by insmod */
static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 };
-module_param_array(hp100_port, int, NULL, 0);
+module_param_hw_array(hp100_port, int, ioport, NULL, 0);
/* List of devices */
static struct net_device *hp100_devlist[HP100_DEVICES];
module_param(max_interrupt_work, int, 0);
module_param(debug, int, 0);
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param_array(xcvr, int, NULL, 0);
MODULE_PARM_DESC(max_interrupt_work, "ATP maximum events handled per interrupt");
MODULE_PARM_DESC(debug, "ATP debug level (0-7)");
static struct net_device *devSMC9194;
MODULE_LICENSE("GPL");
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
module_param(ifport, int, 0);
MODULE_PARM_DESC(io, "SMC 99194 I/O base address");
MODULE_PARM_DESC(irq, "SMC 99194 IRQ number");
module_param_array(mode, charp, NULL, 0);
MODULE_PARM_DESC(mode, "baycom operating mode");
-module_param_array(iobase, int, NULL, 0);
+module_param_hw_array(iobase, int, ioport, NULL, 0);
MODULE_PARM_DESC(iobase, "baycom io base address");
MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
module_param_array(mode, charp, NULL, 0);
MODULE_PARM_DESC(mode, "baycom operating mode; eg. par96 or picpar");
-module_param_array(iobase, int, NULL, 0);
+module_param_hw_array(iobase, int, ioport, NULL, 0);
MODULE_PARM_DESC(iobase, "baycom io base address");
MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
module_param_array(mode, charp, NULL, 0);
MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD");
-module_param_array(iobase, int, NULL, 0);
+module_param_hw_array(iobase, int, ioport, NULL, 0);
MODULE_PARM_DESC(iobase, "baycom io base address");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(irq, "baycom irq number");
module_param_array(baud, int, NULL, 0);
MODULE_PARM_DESC(baud, "baycom baud rate (300 to 4800)");
module_param_array(mode, charp, NULL, 0);
MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD");
-module_param_array(iobase, int, NULL, 0);
+module_param_hw_array(iobase, int, ioport, NULL, 0);
MODULE_PARM_DESC(iobase, "baycom io base address");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(irq, "baycom irq number");
MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
MODULE_AUTHOR("Klaus Kudielka");
MODULE_DESCRIPTION("Driver for high-speed SCC boards");
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_LICENSE("GPL");
static void __exit dmascc_exit(void)
MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME);
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_PARM_DESC(io, "Base I/O addresses");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(irq, "IRQ lines");
-module_param_array(dma, int, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
MODULE_PARM_DESC(dma, "DMA channels");
module_init(ali_ircc_init);
module_param(qos_mtt_bits, int, 0);
MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_PARM_DESC(io, "Base I/O addresses");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(irq, "IRQ lines");
-module_param_array(dma, int, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
MODULE_PARM_DESC(dma, "DMA channels");
module_param(dongle_id, int, 0);
MODULE_PARM_DESC(dongle_id, "Type-id of used dongle");
#define DMA_INVAL 255
static int ircc_dma = DMA_INVAL;
-module_param(ircc_dma, int, 0);
+module_param_hw(ircc_dma, int, dma, 0);
MODULE_PARM_DESC(ircc_dma, "DMA channel");
#define IRQ_INVAL 255
static int ircc_irq = IRQ_INVAL;
-module_param(ircc_irq, int, 0);
+module_param_hw(ircc_irq, int, irq, 0);
MODULE_PARM_DESC(ircc_irq, "IRQ line");
static int ircc_fir;
-module_param(ircc_fir, int, 0);
+module_param_hw(ircc_fir, int, ioport, 0);
MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
static int ircc_sir;
-module_param(ircc_sir, int, 0);
+module_param_hw(ircc_sir, int, ioport, 0);
MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
static int ircc_cfg;
-module_param(ircc_cfg, int, 0);
+module_param_hw(ircc_cfg, int, ioport, 0);
MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
static int ircc_transceiver;
module_param(qos_mtt_bits, int, 0);
MODULE_PARM_DESC(qos_mtt_bits, "Mimimum Turn Time");
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_PARM_DESC(io, "Base I/O addresses");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(irq, "IRQ lines");
/*
static struct class *cosa_class;
#ifdef MODULE
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_PARM_DESC(io, "The I/O bases of the COSA or SRP cards");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(irq, "The IRQ lines of the COSA or SRP cards");
-module_param_array(dma, int, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
MODULE_PARM_DESC(dma, "The DMA channels of the COSA or SRP cards");
MODULE_AUTHOR("Jan \"Yenya\" Kasprzak, <kas@fi.muni.cz>");
static int io = 0x200;
static int irq = 9;
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card");
-module_param(dma, int, 0);
+module_param_hw(dma, int, dma, 0);
MODULE_PARM_DESC(dma, "Set this to 1 to use DMA1/DMA3 for TX/RX");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "The interrupt line setting for the Comtrol Hostess SV11 card");
MODULE_AUTHOR("Alan Cox");
#ifdef MODULE
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param_array(baud, int, NULL, 0);
module_param_array(rxl, int, NULL, 0);
module_param_array(mac, int, NULL, 0);
static int irq=5;
static bool slow=false;
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, "The I/O base of the Sealevel card");
-module_param(txdma, int, 0);
+module_param_hw(txdma, int, dma, 0);
MODULE_PARM_DESC(txdma, "Transmit DMA channel");
-module_param(rxdma, int, 0);
+module_param_hw(rxdma, int, dma, 0);
MODULE_PARM_DESC(rxdma, "Receive DMA channel");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card");
module_param(slow, bool, 0);
MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012");
"Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350");
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param_array(rates, int, NULL, 0);
module_param_array(ssids, charp, NULL, 0);
module_param(auto_wep, int, 0);
static char *dma[PARPORT_PC_MAX_PORTS];
MODULE_PARM_DESC(io, "Base I/O address (SPP regs)");
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_PARM_DESC(io_hi, "Base I/O address (ECR)");
-module_param_array(io_hi, int, NULL, 0);
+module_param_hw_array(io_hi, int, ioport, NULL, 0);
MODULE_PARM_DESC(irq, "IRQ line");
-module_param_array(irq, charp, NULL, 0);
+module_param_hw_array(irq, charp, irq, NULL, 0);
MODULE_PARM_DESC(dma, "DMA channel");
-module_param_array(dma, charp, NULL, 0);
+module_param_hw_array(dma, charp, dma, NULL, 0);
#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
(defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialisation");
MODULE_PARM_DESC(first_slot, "Hotswap bus first slot number");
module_param(last_slot, byte, 0);
MODULE_PARM_DESC(last_slot, "Hotswap bus last slot number");
-module_param(port, ushort, 0);
+module_param_hw(port, ushort, ioport, 0);
MODULE_PARM_DESC(port, "#ENUM signal I/O port");
module_param(enum_bit, uint, 0);
MODULE_PARM_DESC(enum_bit, "#ENUM signal bit (0-7)");
static int cable_mode = -1;
static int wakeup = 0;
-module_param(i365_base, ulong, 0444);
+module_param_hw(i365_base, ulong, ioport, 0444);
module_param(ignore, int, 0444);
module_param(extra_sockets, int, 0444);
-module_param(irq_mask, int, 0444);
-module_param_array(irq_list, int, &irq_list_count, 0444);
-module_param(cs_irq, int, 0444);
+module_param_hw(irq_mask, int, other, 0444);
+module_param_hw_array(irq_list, int, irq, &irq_list_count, 0444);
+module_param_hw(cs_irq, int, irq, 0444);
module_param(async_clock, int, 0444);
module_param(cable_mode, int, 0444);
module_param(wakeup, int, 0444);
/* CCLK external clock time, in nanoseconds. 70 ns = 14.31818 MHz */
static int cycle_time = 70;
-module_param(tcic_base, ulong, 0444);
+module_param_hw(tcic_base, ulong, ioport, 0444);
module_param(ignore, int, 0444);
module_param(do_scan, int, 0444);
-module_param(irq_mask, int, 0444);
-module_param_array(irq_list, int, &irq_list_count, 0444);
-module_param(cs_irq, int, 0444);
+module_param_hw(irq_mask, int, other, 0444);
+module_param_hw_array(irq_list, int, irq, &irq_list_count, 0444);
+module_param_hw(cs_irq, int, irq, 0444);
module_param(poll_interval, int, 0444);
module_param(poll_quick, int, 0444);
module_param(cycle_time, int, 0444);
#if !defined(PCMCIA)
#if defined(MODULE)
static int io[] = {0, 0};
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_PARM_DESC(io,"base io address of controller");
static int irq[] = {0, 0};
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(irq,"interrupt for controller");
static int scsiid[] = {7, 7};
MODULE_PARM_DESC(isapnp, "enable PnP support (default=1)");
static int io[MAXBOARDS] = { 0x330, 0x334, 0, 0 };
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_PARM_DESC(io, "base IO address of controller (0x130,0x134,0x230,0x234,0x330,0x334, default=0x330,0x334)");
/* time AHA spends on the AT-bus during data transfer */
static int ncr_53c400a;
static int dtc_3181e;
static int hp_c2502;
-module_param(ncr_irq, int, 0);
-module_param(ncr_addr, int, 0);
+module_param_hw(ncr_irq, int, irq, 0);
+module_param_hw(ncr_addr, int, ioport, 0);
module_param(ncr_5380, int, 0);
module_param(ncr_53c400, int, 0);
module_param(ncr_53c400a, int, 0);
module_param(hp_c2502, int, 0);
static int irq[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(irq, "IRQ number(s) (0=none, 254=auto [default])");
static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
-module_param_array(base, int, NULL, 0);
+module_param_hw_array(base, int, ioport, NULL, 0);
MODULE_PARM_DESC(base, "base address(es)");
static int card[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
static int force_dma32 = 0;
/* parameters for modprobe/insmod */
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
module_param(disable, int, 0);
module_param(reserve_mode, int, 0);
module_param_array(reserve_list, int, NULL, 0);
static struct qlogicfas408_priv *cards;
static int iobase[MAX_QLOGICFAS];
static int irq[MAX_QLOGICFAS] = { [0 ... MAX_QLOGICFAS-1] = -1 };
-module_param_array(iobase, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(iobase, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
MODULE_PARM_DESC(iobase, "I/O address");
MODULE_PARM_DESC(irq, "IRQ");
speakup_info.port_tts = 0;
}
-module_param_named(port, port_forced, int, 0444);
+module_param_hw_named(port, port_forced, int, ioport, 0444);
module_param_named(start, synth_acntpc.startup, short, 0444);
MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
speakup_info.port_tts = 0;
}
-module_param_named(port, port_forced, int, 0444);
+module_param_hw_named(port, port_forced, int, ioport, 0444);
module_param_named(start, synth_dtlk.startup, short, 0444);
MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
synth_port = 0;
}
-module_param_named(port, port_forced, int, 0444);
+module_param_hw_named(port, port_forced, int, ioport, 0444);
module_param_named(start, synth_keypc.startup, short, 0444);
MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
/* These are required for each board */
MODULE_PARM_DESC(bus, "Enumeration of VMEbus to which the board is connected");
-module_param_array(bus, int, &bus_num, 0444);
+module_param_hw_array(bus, int, other, &bus_num, 0444);
MODULE_PARM_DESC(base, "Base VME address for PIO2 Registers");
-module_param_array(base, long, &base_num, 0444);
+module_param_hw_array(base, long, other, &base_num, 0444);
MODULE_PARM_DESC(vector, "VME IRQ Vector (Lower 4 bits masked)");
-module_param_array(vector, int, &vector_num, 0444);
+module_param_hw_array(vector, int, other, &vector_num, 0444);
MODULE_PARM_DESC(level, "VME IRQ Level");
-module_param_array(level, int, &level_num, 0444);
+module_param_hw_array(level, int, other, &level_num, 0444);
MODULE_PARM_DESC(variant, "Last 4 characters of PIO2 board variant");
module_param_array(variant, charp, &variant_num, 0444);
static long maddr[NR_CARDS];
static int irq[NR_CARDS];
-module_param_array(maddr, long, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(maddr, long, iomem, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
#endif /* CONFIG_ISA */
module_param_array(type, uint, NULL, 0);
MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
-module_param_array(baseaddr, ulong, NULL, 0);
+module_param_hw_array(baseaddr, ulong, ioport, NULL, 0);
MODULE_PARM_DESC(baseaddr, "base address");
module_param_array(numports, uint, NULL, 0);
MODULE_PARM_DESC(numports, "numports (ignored for C218)");
MODULE_AUTHOR("Casper Yang");
MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
-module_param_array(ioaddr, ulong, NULL, 0);
+module_param_hw_array(ioaddr, ulong, ioport, NULL, 0);
MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
module_param(ttymajor, int, 0);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Theodore Ts'o");
MODULE_DESCRIPTION("Comtrol RocketPort driver");
-module_param(board1, ulong, 0);
+module_param_hw(board1, ulong, ioport, 0);
MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1");
-module_param(board2, ulong, 0);
+module_param_hw(board2, ulong, ioport, 0);
MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2");
-module_param(board3, ulong, 0);
+module_param_hw(board3, ulong, ioport, 0);
MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3");
-module_param(board4, ulong, 0);
+module_param_hw(board4, ulong, ioport, 0);
MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4");
-module_param(controller, ulong, 0);
+module_param_hw(controller, ulong, ioport, 0);
MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller");
module_param(support_low_speed, bool, 0);
MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
-module_param(share_irqs, uint, 0644);
+module_param_hw(share_irqs, uint, other, 0644);
MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)");
module_param(nr_uarts, uint, 0644);
MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
#ifdef CONFIG_SERIAL_8250_RSA
-module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
+module_param_hw_array(probe_rsa, ulong, ioport, &probe_rsa_count, 0444);
MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
#endif
MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
module_param(break_on_load, bool, 0);
module_param(ttymajor, int, 0);
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(dma, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
module_param(debug_level, int, 0);
module_param_array(maxframe, int, NULL, 0);
module_param_array(txdmabufs, int, NULL, 0);
MODULE_PARM_DESC(nosplash, "Disable doing the splash screen");
module_param(arcfb_enable, uint, 0);
MODULE_PARM_DESC(arcfb_enable, "Enable communication with Arc board");
-module_param(dio_addr, ulong, 0);
+module_param_hw(dio_addr, ulong, ioport, 0);
MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480");
-module_param(cio_addr, ulong, 0);
+module_param_hw(cio_addr, ulong, ioport, 0);
MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400");
-module_param(c2io_addr, ulong, 0);
+module_param_hw(c2io_addr, ulong, ioport, 0);
MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408");
module_param(splashval, ulong, 0);
MODULE_PARM_DESC(splashval, "Splash pattern: 0xFF is black, 0x00 is green");
module_param(tuhold, ulong, 0);
MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Arc board");
-module_param(irq, uint, 0);
+module_param_hw(irq, uint, irq, 0);
MODULE_PARM_DESC(irq, "IRQ for the Arc board");
module_init(arcfb_init);
module_param(nosplash, uint, 0);
MODULE_PARM_DESC(nosplash, "Disable doing the splash screen");
-module_param(dio_addr, ulong, 0);
+module_param_hw(dio_addr, ulong, ioport, 0);
MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480");
-module_param(cio_addr, ulong, 0);
+module_param_hw(cio_addr, ulong, ioport, 0);
MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400");
-module_param(c2io_addr, ulong, 0);
+module_param_hw(c2io_addr, ulong, ioport, 0);
MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408");
module_param(splashval, ulong, 0);
MODULE_PARM_DESC(splashval, "Splash pattern: 0x00 is black, 0x01 is white");
MODULE_SUPPORTED_DEVICE("sma cpu5 watchdog");
MODULE_LICENSE("GPL");
-module_param(port, int, 0);
+module_param_hw(port, int, ioport, 0);
MODULE_PARM_DESC(port, "base address of watchdog card, default is 0x91");
module_param(verbose, int, 0);
#define WDT_TIMER_CFG 0xf3
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)");
module_param(ev, charp, 0);
MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `int')");
MODULE_DESCRIPTION("PC87413 WDT driver");
MODULE_LICENSE("GPL");
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, MODNAME " I/O port (default: "
__MODULE_STRING(IO_DEFAULT) ").");
"When set to 0 driver ISA PnP support will be disabled");
#endif
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, "io port");
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1");
static DEFINE_SPINLOCK(wdt_lock);
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, "WDT io port (default=0x240)");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "WDT irq (default=11)");
/* Support for the Fan Tachometer on the WDT501-P */
MODULE_PARM_DESC(pmsg_size, "size of user space message log");
static unsigned long long mem_address;
-module_param(mem_address, ullong, 0400);
+module_param_hw(mem_address, ullong, other, 0400);
MODULE_PARM_DESC(mem_address,
"start of reserved RAM used to store oops/panic logs");
* Flags available for kernel_param
*
* UNSAFE - the parameter is dangerous and setting it will taint the kernel
+ * HWPARAM - Hardware param not permitted in lockdown mode
*/
enum {
- KERNEL_PARAM_FL_UNSAFE = (1 << 0)
+ KERNEL_PARAM_FL_UNSAFE = (1 << 0),
+ KERNEL_PARAM_FL_HWPARAM = (1 << 1),
};
struct kernel_param {
perm, -1, 0); \
__MODULE_PARM_TYPE(name, "array of " #type)
+enum hwparam_type {
+ hwparam_ioport, /* Module parameter configures an I/O port */
+ hwparam_iomem, /* Module parameter configures an I/O mem address */
+ hwparam_ioport_or_iomem, /* Module parameter could be either, depending on other option */
+ hwparam_irq, /* Module parameter configures an I/O port */
+ hwparam_dma, /* Module parameter configures a DMA channel */
+ hwparam_dma_addr, /* Module parameter configures a DMA buffer address */
+ hwparam_other, /* Module parameter configures some other value */
+};
+
+/**
+ * module_param_hw_named - A parameter representing a hw parameters
+ * @name: a valid C identifier which is the parameter name.
+ * @value: the actual lvalue to alter.
+ * @type: the type of the parameter
+ * @hwtype: what the value represents (enum hwparam_type)
+ * @perm: visibility in sysfs.
+ *
+ * Usually it's a good idea to have variable names and user-exposed names the
+ * same, but that's harder if the variable must be non-static or is inside a
+ * structure. This allows exposure under a different name.
+ */
+#define module_param_hw_named(name, value, type, hwtype, perm) \
+ param_check_##type(name, &(value)); \
+ __module_param_call(MODULE_PARAM_PREFIX, name, \
+ ¶m_ops_##type, &value, \
+ perm, -1, \
+ KERNEL_PARAM_FL_HWPARAM | (hwparam_##hwtype & 0)); \
+ __MODULE_PARM_TYPE(name, #type)
+
+#define module_param_hw(name, type, hwtype, perm) \
+ module_param_hw_named(name, name, type, hwtype, perm)
+
+/**
+ * module_param_hw_array - A parameter representing an array of hw parameters
+ * @name: the name of the array variable
+ * @type: the type, as per module_param()
+ * @hwtype: what the value represents (enum hwparam_type)
+ * @nump: optional pointer filled in with the number written
+ * @perm: visibility in sysfs
+ *
+ * Input and output are as comma-separated values. Commas inside values
+ * don't work properly (eg. an array of charp).
+ *
+ * ARRAY_SIZE(@name) is used to determine the number of elements in the
+ * array, so the definition must be visible.
+ */
+#define module_param_hw_array(name, type, hwtype, nump, perm) \
+ param_check_##type(name, &(name)[0]); \
+ static const struct kparam_array __param_arr_##name \
+ = { .max = ARRAY_SIZE(name), .num = nump, \
+ .ops = ¶m_ops_##type, \
+ .elemsize = sizeof(name[0]), .elem = name }; \
+ __module_param_call(MODULE_PARAM_PREFIX, name, \
+ ¶m_array_ops, \
+ .arr = &__param_arr_##name, \
+ perm, -1, \
+ KERNEL_PARAM_FL_HWPARAM | (hwparam_##hwtype & 0)); \
+ __MODULE_PARM_TYPE(name, "array of " #type)
+
+
extern const struct kernel_param_ops param_array_ops;
extern const struct kernel_param_ops param_ops_string;
module_param_array(pnp, bool, NULL, 0444);
MODULE_PARM_DESC(pnp, "PnP detection for MPU-401 device.");
#endif
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for MPU-401 device.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for MPU-401 device.");
module_param_array(uart_enter, bool, NULL, 0444);
MODULE_PARM_DESC(uart_enter, "Issue UART_ENTER command at open.");
MODULE_PARM_DESC(index, "Index value for MotuMTPAV MIDI.");
module_param(id, charp, 0444);
MODULE_PARM_DESC(id, "ID string for MotuMTPAV MIDI.");
-module_param(port, long, 0444);
+module_param_hw(port, long, ioport, 0444);
MODULE_PARM_DESC(port, "Parallel port # for MotuMTPAV MIDI.");
-module_param(irq, int, 0444);
+module_param_hw(irq, int, irq, 0444);
MODULE_PARM_DESC(irq, "Parallel IRQ # for MotuMTPAV MIDI.");
module_param(hwports, int, 0444);
MODULE_PARM_DESC(hwports, "Hardware ports # for MotuMTPAV MIDI.");
MODULE_PARM_DESC(id, "ID string for Serial MIDI.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable UART16550A chip.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for UART16550A chip.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for UART16550A chip.");
module_param_array(speed, int, NULL, 0444);
MODULE_PARM_DESC(speed, "Speed in bauds.");
MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver.");
module_param_array(thinkpad, bool, NULL, 0444);
MODULE_PARM_DESC(thinkpad, "Enable only for the onboard CS4248 of IBM Thinkpad 360/750/755 series.");
MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
static int snd_adlib_match(struct device *dev, unsigned int n)
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for CMI8328 soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for CMI8328 driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for CMI8328 driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 for CMI8328 driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 for CMI8328 driver.");
-module_param_array(mpuport, long, NULL, 0444);
+module_param_hw_array(mpuport, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8328 driver.");
-module_param_array(mpuirq, int, NULL, 0444);
+module_param_hw_array(mpuirq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8328 MPU-401 port.");
#ifdef SUPPORT_JOYSTICK
module_param_array(gameport, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
-module_param_array(sbport, long, NULL, 0444);
+module_param_hw_array(sbport, long, ioport, NULL, 0444);
MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver.");
-module_param_array(sbirq, int, NULL, 0444);
+module_param_hw_array(sbirq, int, irq, NULL, 0444);
MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver.");
-module_param_array(sbdma8, int, NULL, 0444);
+module_param_hw_array(sbdma8, int, dma, NULL, 0444);
MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver.");
-module_param_array(sbdma16, int, NULL, 0444);
+module_param_hw_array(sbdma16, int, dma, NULL, 0444);
MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver.");
-module_param_array(wssport, long, NULL, 0444);
+module_param_hw_array(wssport, long, ioport, NULL, 0444);
MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver.");
-module_param_array(wssirq, int, NULL, 0444);
+module_param_hw_array(wssirq, int, irq, NULL, 0444);
MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver.");
-module_param_array(wssdma, int, NULL, 0444);
+module_param_hw_array(wssdma, int, dma, NULL, 0444);
MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver.");
-module_param_array(fmport, long, NULL, 0444);
+module_param_hw_array(fmport, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver.");
-module_param_array(mpuport, long, NULL, 0444);
+module_param_hw_array(mpuport, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver.");
-module_param_array(mpuirq, int, NULL, 0444);
+module_param_hw_array(mpuirq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port.");
#ifdef CONFIG_PNP
static int isa_registered;
MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
-module_param_array(mpu_irq, int, NULL, 0444);
+module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver.");
static int snd_cs4231_match(struct device *dev, unsigned int n)
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard.");
#endif
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " IDENT " driver.");
-module_param_array(cport, long, NULL, 0444);
+module_param_hw_array(cport, long, ioport, NULL, 0444);
MODULE_PARM_DESC(cport, "Control port # for " IDENT " driver.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " IDENT " driver.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM port # for " IDENT " driver.");
-module_param_array(sb_port, long, NULL, 0444);
+module_param_hw_array(sb_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(sb_port, "SB port # for " IDENT " driver (optional).");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for " IDENT " driver.");
-module_param_array(mpu_irq, int, NULL, 0444);
+module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " IDENT " driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 # for " IDENT " driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for " IDENT " driver.");
#ifdef CONFIG_PNP
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver.");
-module_param_array(irq, int, NULL, 0444);
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM port # for ES1688 driver.");
MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
-module_param_array(mpu_irq, int, NULL, 0444);
+module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver.");
-module_param_array(dma8, int, NULL, 0444);
+module_param_hw_array(dma8, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver.");
#ifdef CONFIG_PNP
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for ES18xx driver.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for ES18xx driver.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM port # for ES18xx driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for ES18xx driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA 1 # for ES18xx driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA 2 # for ES18xx driver.");
#ifdef CONFIG_PNP
static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
-module_param_array(wss_port, long, NULL, 0444);
+module_param_hw_array(wss_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(wss_port, "WSS port # for " CRD_NAME " driver.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM port # for " CRD_NAME " driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
-module_param_array(mpu_irq, int, NULL, 0444);
+module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "Playback DMA # for " CRD_NAME " driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "Capture DMA # for " CRD_NAME " driver.");
/*
MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver.");
module_param_array(joystick_dac, int, NULL, 0444);
MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver.");
MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
-module_param_array(gf1_port, long, NULL, 0444);
+module_param_hw_array(gf1_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(gf1_port, "GF1 port # for " CRD_NAME " driver (optional).");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
-module_param_array(mpu_irq, int, NULL, 0444);
+module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver.");
-module_param_array(gf1_irq, int, NULL, 0444);
+module_param_hw_array(gf1_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(gf1_irq, "GF1 IRQ # for " CRD_NAME " driver.");
-module_param_array(dma8, int, NULL, 0444);
+module_param_hw_array(dma8, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "GF1 DMA # for " CRD_NAME " driver.");
module_param_array(joystick_dac, int, NULL, 0444);
MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver.");
MODULE_PARM_DESC(id, "ID string for GUS MAX soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable GUS MAX soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for GUS MAX driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for GUS MAX driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 # for GUS MAX driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for GUS MAX driver.");
module_param_array(joystick_dac, int, NULL, 0444);
MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for GUS MAX driver.");
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard.");
#endif
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for InterWave driver.");
#ifdef SNDRV_STB
-module_param_array(port_tc, long, NULL, 0444);
+module_param_hw_array(port_tc, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port_tc, "Tone control (TEA6330T - i2c bus) port # for InterWave driver.");
#endif
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for InterWave driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 # for InterWave driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for InterWave driver.");
module_param_array(joystick_dac, int, NULL, 0444);
MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for InterWave driver.");
MODULE_FIRMWARE(INITCODEFILE);
MODULE_FIRMWARE(PERMCODEFILE);
-module_param_array(io, long, NULL, S_IRUGO);
+module_param_hw_array(io, long, ioport, NULL, S_IRUGO);
MODULE_PARM_DESC(io, "IO port #");
-module_param_array(irq, int, NULL, S_IRUGO);
-module_param_array(mem, long, NULL, S_IRUGO);
+module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
+module_param_hw_array(mem, long, iomem, NULL, S_IRUGO);
module_param_array(write_ndelay, int, NULL, S_IRUGO);
module_param(calibrate_signal, int, S_IRUGO);
#ifndef MSND_CLASSIC
module_param_array(digital, int, NULL, S_IRUGO);
-module_param_array(cfg, long, NULL, S_IRUGO);
+module_param_hw_array(cfg, long, ioport, NULL, S_IRUGO);
module_param_array(reset, int, 0, S_IRUGO);
-module_param_array(mpu_io, long, NULL, S_IRUGO);
-module_param_array(mpu_irq, int, NULL, S_IRUGO);
-module_param_array(ide_io0, long, NULL, S_IRUGO);
-module_param_array(ide_io1, long, NULL, S_IRUGO);
-module_param_array(ide_irq, int, NULL, S_IRUGO);
-module_param_array(joystick_io, long, NULL, S_IRUGO);
+module_param_hw_array(mpu_io, long, ioport, NULL, S_IRUGO);
+module_param_hw_array(mpu_irq, int, irq, NULL, S_IRUGO);
+module_param_hw_array(ide_io0, long, ioport, NULL, S_IRUGO);
+module_param_hw_array(ide_io1, long, ioport, NULL, S_IRUGO);
+module_param_hw_array(ide_irq, int, irq, NULL, S_IRUGO);
+module_param_hw_array(joystick_io, long, ioport, NULL, S_IRUGO);
#endif
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for OPL3-SA driver.");
-module_param_array(sb_port, long, NULL, 0444);
+module_param_hw_array(sb_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(sb_port, "SB port # for OPL3-SA driver.");
-module_param_array(wss_port, long, NULL, 0444);
+module_param_hw_array(wss_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(wss_port, "WSS port # for OPL3-SA driver.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM port # for OPL3-SA driver.");
-module_param_array(midi_port, long, NULL, 0444);
+module_param_hw_array(midi_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(midi_port, "MIDI port # for OPL3-SA driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for OPL3-SA driver.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 # for OPL3-SA driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for OPL3-SA driver.");
module_param_array(opl3sa3_ymode, int, NULL, 0444);
MODULE_PARM_DESC(opl3sa3_ymode, "Speaker size selection for 3D Enhancement mode: Desktop/Large Notebook/Small Notebook/HiFi.");
MODULE_PARM_DESC(index, "Index value for miro soundcard.");
module_param(id, charp, 0444);
MODULE_PARM_DESC(id, "ID string for miro soundcard.");
-module_param(port, long, 0444);
+module_param_hw(port, long, ioport, 0444);
MODULE_PARM_DESC(port, "WSS port # for miro driver.");
-module_param(mpu_port, long, 0444);
+module_param_hw(mpu_port, long, ioport, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for miro driver.");
-module_param(fm_port, long, 0444);
+module_param_hw(fm_port, long, ioport, 0444);
MODULE_PARM_DESC(fm_port, "FM Port # for miro driver.");
-module_param(irq, int, 0444);
+module_param_hw(irq, int, irq, 0444);
MODULE_PARM_DESC(irq, "WSS irq # for miro driver.");
-module_param(mpu_irq, int, 0444);
+module_param_hw(mpu_irq, int, irq, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for miro driver.");
-module_param(dma1, int, 0444);
+module_param_hw(dma1, int, dma, 0444);
MODULE_PARM_DESC(dma1, "1st dma # for miro driver.");
-module_param(dma2, int, 0444);
+module_param_hw(dma2, int, dma, 0444);
MODULE_PARM_DESC(dma2, "2nd dma # for miro driver.");
module_param(wss, int, 0444);
MODULE_PARM_DESC(wss, "wss mode");
module_param(isapnp, bool, 0444);
MODULE_PARM_DESC(isapnp, "Enable ISA PnP detection for specified soundcard.");
#endif
-module_param(port, long, 0444);
+module_param_hw(port, long, ioport, 0444);
MODULE_PARM_DESC(port, "WSS port # for opti9xx driver.");
-module_param(mpu_port, long, 0444);
+module_param_hw(mpu_port, long, ioport, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for opti9xx driver.");
-module_param(fm_port, long, 0444);
+module_param_hw(fm_port, long, ioport, 0444);
MODULE_PARM_DESC(fm_port, "FM port # for opti9xx driver.");
-module_param(irq, int, 0444);
+module_param_hw(irq, int, irq, 0444);
MODULE_PARM_DESC(irq, "WSS irq # for opti9xx driver.");
-module_param(mpu_irq, int, 0444);
+module_param_hw(mpu_irq, int, irq, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for opti9xx driver.");
-module_param(dma1, int, 0444);
+module_param_hw(dma1, int, dma, 0444);
MODULE_PARM_DESC(dma1, "1st dma # for opti9xx driver.");
#if defined(CS4231) || defined(OPTi93X)
-module_param(dma2, int, 0444);
+module_param_hw(dma2, int, dma, 0444);
MODULE_PARM_DESC(dma2, "2nd dma # for opti9xx driver.");
#endif /* CS4231 || OPTi93X */
MODULE_PARM_DESC(id, "ID string for Media Vision Jazz16 based soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Media Vision Jazz16 based soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for jazz16 driver.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for jazz16 driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for jazz16 driver.");
-module_param_array(mpu_irq, int, NULL, 0444);
+module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for jazz16 driver.");
-module_param_array(dma8, int, NULL, 0444);
+module_param_hw_array(dma8, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma8, "DMA8 # for jazz16 driver.");
-module_param_array(dma16, int, NULL, 0444);
+module_param_hw_array(dma16, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma16, "DMA16 # for jazz16 driver.");
#define SB_JAZZ16_WAKEUP 0xaf
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
#endif
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for SB16 driver.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for SB16 driver.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM port # for SB16 PnP driver.");
#ifdef SNDRV_SBAWE_EMU8000
-module_param_array(awe_port, long, NULL, 0444);
+module_param_hw_array(awe_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(awe_port, "AWE port # for SB16 PnP driver.");
#endif
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for SB16 driver.");
-module_param_array(dma8, int, NULL, 0444);
+module_param_hw_array(dma8, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma8, "8-bit DMA # for SB16 driver.");
-module_param_array(dma16, int, NULL, 0444);
+module_param_hw_array(dma16, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma16, "16-bit DMA # for SB16 driver.");
module_param_array(mic_agc, int, NULL, 0444);
MODULE_PARM_DESC(mic_agc, "Mic Auto-Gain-Control switch.");
MODULE_PARM_DESC(id, "ID string for Sound Blaster soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Sound Blaster soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for SB8 driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for SB8 driver.");
-module_param_array(dma8, int, NULL, 0444);
+module_param_hw_array(dma8, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma8, "8-bit DMA # for SB8 driver.");
struct snd_sb8 {
MODULE_PARM_DESC(id, "ID string for sc-6000 based soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable sc-6000 based soundcard.");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for sc-6000 driver.");
-module_param_array(mss_port, long, NULL, 0444);
+module_param_hw_array(mss_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mss_port, "MSS Port # for sc-6000 driver.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for sc-6000 driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for sc-6000 driver.");
-module_param_array(mpu_irq, int, NULL, 0444);
+module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver.");
-module_param_array(dma, int, NULL, 0444);
+module_param_hw_array(dma, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver.");
module_param_array(joystick, bool, NULL, 0444);
MODULE_PARM_DESC(joystick, "Enable gameport.");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "Description for SoundScape card");
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for SoundScape driver.");
-module_param_array(wss_port, long, NULL, 0444);
+module_param_hw_array(wss_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver.");
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver.");
-module_param_array(mpu_irq, int, NULL, 0444);
+module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver.");
-module_param_array(dma, int, NULL, 0444);
+module_param_hw_array(dma, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma, "DMA # for SoundScape driver.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver.");
module_param_array(joystick, bool, NULL, 0444);
module_param_array(isapnp, bool, NULL, 0444);
MODULE_PARM_DESC(isapnp, "ISA PnP detection for WaveFront soundcards.");
#endif
-module_param_array(cs4232_pcm_port, long, NULL, 0444);
+module_param_hw_array(cs4232_pcm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(cs4232_pcm_port, "Port # for CS4232 PCM interface.");
-module_param_array(cs4232_pcm_irq, int, NULL, 0444);
+module_param_hw_array(cs4232_pcm_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(cs4232_pcm_irq, "IRQ # for CS4232 PCM interface.");
-module_param_array(dma1, int, NULL, 0444);
+module_param_hw_array(dma1, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 # for CS4232 PCM interface.");
-module_param_array(dma2, int, NULL, 0444);
+module_param_hw_array(dma2, int, dma, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for CS4232 PCM interface.");
-module_param_array(cs4232_mpu_port, long, NULL, 0444);
+module_param_hw_array(cs4232_mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(cs4232_mpu_port, "port # for CS4232 MPU-401 interface.");
-module_param_array(cs4232_mpu_irq, int, NULL, 0444);
+module_param_hw_array(cs4232_mpu_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(cs4232_mpu_irq, "IRQ # for CS4232 MPU-401 interface.");
-module_param_array(ics2115_irq, int, NULL, 0444);
+module_param_hw_array(ics2115_irq, int, irq, NULL, 0444);
MODULE_PARM_DESC(ics2115_irq, "IRQ # for ICS2115.");
-module_param_array(ics2115_port, long, NULL, 0444);
+module_param_hw_array(ics2115_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(ics2115_port, "Port # for ICS2115.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM port #.");
module_param_array(use_cs4232_midi, bool, NULL, 0444);
MODULE_PARM_DESC(use_cs4232_midi, "Use CS4232 MPU-401 interface (inaccessibly located inside your computer)");
static int __initdata dma2 = -1;
static int __initdata type = 0;
-module_param(io, int, 0); /* I/O for a raw AD1848 card */
-module_param(irq, int, 0); /* IRQ to use */
-module_param(dma, int, 0); /* First DMA channel */
-module_param(dma2, int, 0); /* Second DMA channel */
+module_param_hw(io, int, ioport, 0); /* I/O for a raw AD1848 card */
+module_param_hw(irq, int, irq, 0); /* IRQ to use */
+module_param_hw(dma, int, dma, 0); /* First DMA channel */
+module_param_hw(dma2, int, dma, 0); /* Second DMA channel */
module_param(type, int, 0); /* Card type */
module_param(deskpro_xl, bool, 0); /* Special magic for Deskpro XL boxen */
module_param(deskpro_m, bool, 0); /* Special magic for Deskpro M box */
static int __initdata mss_base = -1;
static int __initdata mpu_base = -1;
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)");
-module_param(dma, int, 0);
+module_param_hw(dma, int, dma, 0);
MODULE_PARM_DESC(dma, "dma line (0 1 3)");
-module_param(mpu_irq, int, 0);
+module_param_hw(mpu_irq, int, irq, 0);
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)");
-module_param(mss_base, int, 0);
+module_param_hw(mss_base, int, ioport, 0);
MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)");
-module_param(mpu_base, int, 0);
+module_param_hw(mpu_base, int, ioport, 0);
MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)");
MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>");
MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION);
static int io = -1;
static int irq = -1;
-module_param(irq, int, 0);
-module_param(io, int, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(io, int, ioport, 0);
static int __init init_mpu401(void)
{
calibrate_signal __initdata = CONFIG_MSND_CALSIGNAL;
#endif /* MODULE */
-module_param (io, int, 0);
-module_param (irq, int, 0);
-module_param (mem, int, 0);
+module_param_hw (io, int, ioport, 0);
+module_param_hw (irq, int, irq, 0);
+module_param_hw (mem, int, iomem, 0);
module_param (write_ndelay, int, 0);
module_param (fifosize, int, 0);
module_param (calibrate_signal, int, 0);
#ifndef MSND_CLASSIC
module_param (digital, bool, 0);
-module_param (cfg, int, 0);
+module_param_hw (cfg, int, ioport, 0);
module_param (reset, int, 0);
-module_param (mpu_io, int, 0);
-module_param (mpu_irq, int, 0);
-module_param (ide_io0, int, 0);
-module_param (ide_io1, int, 0);
-module_param (ide_irq, int, 0);
-module_param (joystick_io, int, 0);
+module_param_hw (mpu_io, int, ioport, 0);
+module_param_hw (mpu_irq, int, irq, 0);
+module_param_hw (ide_io0, int, ioport, 0);
+module_param_hw (ide_io1, int, ioport, 0);
+module_param_hw (ide_irq, int, irq, 0);
+module_param_hw (joystick_io, int, ioport, 0);
#endif
static int __init msnd_init(void)
static int io = -1;
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
static int __init init_opl3 (void)
{
static int __initdata sb_dma = -1;
static int __initdata sb_dma16 = -1;
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(dma, int, 0);
-module_param(dma16, int, 0);
-
-module_param(sb_io, int, 0);
-module_param(sb_irq, int, 0);
-module_param(sb_dma, int, 0);
-module_param(sb_dma16, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(dma, int, dma, 0);
+module_param_hw(dma16, int, dma, 0);
+
+module_param_hw(sb_io, int, ioport, 0);
+module_param_hw(sb_irq, int, irq, 0);
+module_param_hw(sb_dma, int, dma, 0);
+module_param_hw(sb_dma16, int, dma, 0);
module_param(joystick, bool, 0);
module_param(symphony, bool, 0);
static bool pss_keep_settings = 1; /* Keep hardware settings at module exit */
static char *pss_firmware = "/etc/sound/pss_synth";
-module_param(pss_io, int, 0);
+module_param_hw(pss_io, int, ioport, 0);
MODULE_PARM_DESC(pss_io, "Set i/o base of PSS card (probably 0x220 or 0x240)");
-module_param(mss_io, int, 0);
+module_param_hw(mss_io, int, ioport, 0);
MODULE_PARM_DESC(mss_io, "Set WSS (audio) i/o base (0x530, 0x604, 0xE80, 0xF40, or other. Address must end in 0 or 4 and must be from 0x100 to 0xFF4)");
-module_param(mss_irq, int, 0);
+module_param_hw(mss_irq, int, irq, 0);
MODULE_PARM_DESC(mss_irq, "Set WSS (audio) IRQ (3, 5, 7, 9, 10, 11, 12)");
-module_param(mss_dma, int, 0);
+module_param_hw(mss_dma, int, dma, 0);
MODULE_PARM_DESC(mss_dma, "Set WSS (audio) DMA (0, 1, 3)");
-module_param(mpu_io, int, 0);
+module_param_hw(mpu_io, int, ioport, 0);
MODULE_PARM_DESC(mpu_io, "Set MIDI i/o base (0x330 or other. Address must be on 4 location boundaries and must be from 0x100 to 0xFFC)");
-module_param(mpu_irq, int, 0);
+module_param_hw(mpu_irq, int, irq, 0);
MODULE_PARM_DESC(mpu_irq, "Set MIDI IRQ (3, 5, 7, 9, 10, 11, 12)");
-module_param(pss_cdrom_port, int, 0);
+module_param_hw(pss_cdrom_port, int, ioport, 0);
MODULE_PARM_DESC(pss_cdrom_port, "Set the PSS CDROM port i/o base (0x340 or other)");
module_param(pss_enable_joystick, bool, 0);
MODULE_PARM_DESC(pss_enable_joystick, "Enables the PSS joystick port (1 to enable, 0 to disable)");
static int __initdata pnp = 0;
#endif
-module_param(io, int, 000);
+module_param_hw(io, int, ioport, 000);
MODULE_PARM_DESC(io, "Soundblaster i/o base address (0x220,0x240,0x260,0x280)");
-module_param(irq, int, 000);
+module_param_hw(irq, int, irq, 000);
MODULE_PARM_DESC(irq, "IRQ (5,7,9,10)");
-module_param(dma, int, 000);
+module_param_hw(dma, int, dma, 000);
MODULE_PARM_DESC(dma, "8-bit DMA channel (0,1,3)");
-module_param(dma16, int, 000);
+module_param_hw(dma16, int, dma, 000);
MODULE_PARM_DESC(dma16, "16-bit DMA channel (5,6,7)");
-module_param(mpu_io, int, 000);
+module_param_hw(mpu_io, int, ioport, 000);
MODULE_PARM_DESC(mpu_io, "MPU base address");
module_param(type, int, 000);
MODULE_PARM_DESC(type, "You can set this to specific card type (doesn't " \
static int __initdata mpu_io = -1;
static int __initdata mpu_irq = -1;
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(dma, int, 0);
-module_param(dma2, int, 0);
-module_param(sb_io, int, 0);
-module_param(sb_dma, int, 0);
-module_param(sb_irq, int, 0);
-module_param(mpu_io, int, 0);
-module_param(mpu_irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(dma, int, dma, 0);
+module_param_hw(dma2, int, dma, 0);
+module_param_hw(sb_io, int, ioport, 0);
+module_param_hw(sb_dma, int, dma, 0);
+module_param_hw(sb_irq, int, irq, 0);
+module_param_hw(mpu_io, int, ioport, 0);
+module_param_hw(mpu_irq, int, irq, 0);
module_param(joystick, bool, 0);
static int __init init_trix(void)
static int io = -1;
static int irq = -1;
-module_param(io, int, 0444);
-module_param(irq, int, 0444);
+module_param_hw(io, int, ioport, 0444);
+module_param_hw(irq, int, irq, 0444);
static int __init init_uart401(void)
static int __initdata io = -1;
static int __initdata irq = -1;
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
static int __init init_uart6850(void)
{
#endif
MODULE_DESCRIPTION("Rockwell WaveArtist RWA-010 sound driver");
-module_param(io, int, 0); /* IO base */
-module_param(irq, int, 0); /* IRQ */
-module_param(dma, int, 0); /* DMA */
-module_param(dma2, int, 0); /* DMA2 */
+module_param_hw(io, int, ioport, 0); /* IO base */
+module_param_hw(irq, int, irq, 0); /* IRQ */
+module_param_hw(dma, int, dma, 0); /* DMA */
+module_param_hw(dma2, int, dma, 0); /* DMA2 */
MODULE_LICENSE("GPL");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable ALS4000 soundcard.");
#ifdef SUPPORT_JOYSTICK
-module_param_array(joystick_port, int, NULL, 0444);
+module_param_hw_array(joystick_port, int, ioport, NULL, 0444);
MODULE_PARM_DESC(joystick_port, "Joystick port address for ALS4000 soundcard. (0 = disabled)");
#endif
MODULE_PARM_DESC(id, "ID string for C-Media PCI soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable C-Media PCI soundcard.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM port.");
module_param_array(soft_ac3, bool, NULL, 0444);
MODULE_PARM_DESC(soft_ac3, "Software-conversion of raw SPDIF packets (model 033 only).");
#ifdef SUPPORT_JOYSTICK
-module_param_array(joystick_port, int, NULL, 0444);
+module_param_hw_array(joystick_port, int, ioport, NULL, 0444);
MODULE_PARM_DESC(joystick_port, "Joystick port address.");
#endif
MODULE_PARM_DESC(enable, "Enable Ensoniq AudioPCI soundcard.");
#ifdef SUPPORT_JOYSTICK
#ifdef CHIP1371
-module_param_array(joystick_port, int, NULL, 0444);
+module_param_hw_array(joystick_port, int, ioport, NULL, 0444);
MODULE_PARM_DESC(joystick_port, "Joystick port address.");
#else
module_param_array(joystick, bool, NULL, 0444);
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Riptide soundcard.");
#ifdef SUPPORT_JOYSTICK
-module_param_array(joystick_port, int, NULL, 0444);
+module_param_hw_array(joystick_port, int, ioport, NULL, 0444);
MODULE_PARM_DESC(joystick_port, "Joystick port # for Riptide soundcard.");
#endif
-module_param_array(mpu_port, int, NULL, 0444);
+module_param_hw_array(mpu_port, int, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU401 port # for Riptide driver.");
-module_param_array(opl3_port, int, NULL, 0444);
+module_param_hw_array(opl3_port, int, ioport, NULL, 0444);
MODULE_PARM_DESC(opl3_port, "OPL3 port # for Riptide driver.");
/*
MODULE_PARM_DESC(reverb, "Enable reverb (SRAM is present) for S3 SonicVibes soundcard.");
module_param_array(mge, bool, NULL, 0444);
MODULE_PARM_DESC(mge, "MIC Gain Enable for S3 SonicVibes soundcard.");
-module_param(dmaio, uint, 0444);
+module_param_hw(dmaio, uint, ioport, 0444);
MODULE_PARM_DESC(dmaio, "DDMA i/o base address for S3 SonicVibes soundcard.");
/*
MODULE_PARM_DESC(index, "Index value for VIA 82xx bridge.");
module_param(id, charp, 0444);
MODULE_PARM_DESC(id, "ID string for VIA 82xx bridge.");
-module_param(mpu_port, long, 0444);
+module_param_hw(mpu_port, long, ioport, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 port. (VT82C686x only)");
#ifdef SUPPORT_JOYSTICK
module_param(joystick, bool, 0444);
MODULE_PARM_DESC(id, "ID string for the Yamaha DS-1 PCI soundcard.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Yamaha DS-1 soundcard.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(mpu_port, "MPU-401 Port.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(fm_port, "FM OPL-3 Port.");
#ifdef SUPPORT_JOYSTICK
-module_param_array(joystick_port, long, NULL, 0444);
+module_param_hw_array(joystick_port, long, ioport, NULL, 0444);
MODULE_PARM_DESC(joystick_port, "Joystick port address");
#endif
module_param_array(rear_switch, bool, NULL, 0444);
projects / platform / kernel / linux-rpi.git / commitdiff