test: add a simple test for the adc-keys button driver

Add adc-keys device to the sandbox/test.dts and connect it to the channel
#3 of the sandbox_adc driver. The default values sampled by sandbox_adc
driver determines that button3 and button4 are released and button5 is
pressed.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index e95f463..202e091 100644 (file)
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/sandbox-gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/sandbox-pinmux.h>
 #include <dt-bindings/mux/mux.h>
 
@@ -69,6 +70,30 @@
                };
        };
 
+       buttons2 {
+               compatible = "adc-keys";
+               io-channels = <&adc 3>;
+               keyup-threshold-microvolt = <3000000>;
+
+               button-up {
+                       label = "button3";
+                       linux,code = <KEY_F3>;
+                       press-threshold-microvolt = <1500000>;
+               };
+
+               button-down {
+                       label = "button4";
+                       linux,code = <KEY_F4>;
+                       press-threshold-microvolt = <1000000>;
+               };
+
+               button-enter {
+                       label = "button5";
+                       linux,code = <KEY_F5>;
+                       press-threshold-microvolt = <500000>;
+               };
+       };
+
        cros_ec: cros-ec {
                reg = <0 0>;
                compatible = "google,cros-ec-sandbox";
@@ -587,8 +612,9 @@
                i2c-eeprom = <&bootcount_i2c>;
        };
 
-       adc@0 {
+       adc: adc@0 {
                compatible = "sandbox,adc";
+               #io-channel-cells = <1>;
                vdd-supply = <&buck2>;
                vss-microvolts = <0>;
        };

diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 0c7674e..3731bf0 100644 (file)
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -122,6 +122,7 @@ CONFIG_DM_BOOTCOUNT=y
 CONFIG_DM_BOOTCOUNT_RTC=y
 CONFIG_DM_BOOTCOUNT_I2C_EEPROM=y
 CONFIG_BUTTON=y
+CONFIG_BUTTON_ADC=y
 CONFIG_BUTTON_GPIO=y
 CONFIG_CLK=y
 CONFIG_CLK_COMPOSITE_CCF=y

diff --git a/test/dm/button.c b/test/dm/button.c
index ecaa47c..f8a7fab 100644 (file)
--- a/test/dm/button.c
+++ b/test/dm/button.c
@@ -7,7 +7,10 @@
 
 #include <common.h>
 #include <dm.h>
+#include <adc.h>
 #include <button.h>
+#include <power/regulator.h>
+#include <power/sandbox_pmic.h>
 #include <asm/gpio.h>
 #include <dm/test.h>
 #include <test/ut.h>
@@ -17,11 +20,20 @@ static int dm_test_button_base(struct unit_test_state *uts)
 {
        struct udevice *dev;
 
-       /* Get the top-level device */
+       /* Get the top-level gpio buttons device */
        ut_assertok(uclass_get_device(UCLASS_BUTTON, 0, &dev));
+       /* Get the 2 gpio buttons */
        ut_assertok(uclass_get_device(UCLASS_BUTTON, 1, &dev));
        ut_assertok(uclass_get_device(UCLASS_BUTTON, 2, &dev));
-       ut_asserteq(-ENODEV, uclass_get_device(UCLASS_BUTTON, 3, &dev));
+
+       /* Get the top-level adc buttons device */
+       ut_assertok(uclass_get_device(UCLASS_BUTTON, 3, &dev));
+       /* Get the 3 adc buttons */
+       ut_assertok(uclass_get_device(UCLASS_BUTTON, 4, &dev));
+       ut_assertok(uclass_get_device(UCLASS_BUTTON, 5, &dev));
+       ut_assertok(uclass_get_device(UCLASS_BUTTON, 6, &dev));
+
+       ut_asserteq(-ENODEV, uclass_get_device(UCLASS_BUTTON, 7, &dev));
 
        return 0;
 }
@@ -72,3 +84,37 @@ static int dm_test_button_label(struct unit_test_state *uts)
        return 0;
 }
 DM_TEST(dm_test_button_label, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
+/* Test adc-keys driver */
+static int dm_test_button_keys_adc(struct unit_test_state *uts)
+{
+       struct udevice *supply;
+       struct udevice *dev;
+       int uV;
+
+       ut_assertok(uclass_get_device_by_name(UCLASS_ADC, "adc@0", &dev));
+
+       ut_assertok(regulator_get_by_devname(SANDBOX_BUCK2_DEVNAME, &supply));
+       ut_assertok(regulator_set_value(supply, SANDBOX_BUCK2_SET_UV));
+       ut_asserteq(SANDBOX_BUCK2_SET_UV, regulator_get_value(supply));
+       /* Update ADC plat and get new Vdd value */
+       ut_assertok(adc_vdd_value(dev, &uV));
+       ut_asserteq(SANDBOX_BUCK2_SET_UV, uV);
+
+       /*
+        * sandbox-adc returns constant value on channel 3, is used by adc-keys:
+        * SANDBOX_ADC_CHANNEL3_DATA * SANDBOX_BUCK2_SET_UV / SANDBOX_ADC_DATA_MASK =
+        * 0x3000 * 3300000 / 0xffff = 618759uV
+        * This means that button3 and button4 are released and button5
+        * is pressed.
+        */
+       ut_assertok(button_get_by_label("button3", &dev));
+       ut_asserteq(BUTTON_OFF, button_get_state(dev));
+       ut_assertok(button_get_by_label("button4", &dev));
+       ut_asserteq(BUTTON_OFF, button_get_state(dev));
+       ut_assertok(button_get_by_label("button5", &dev));
+       ut_asserteq(BUTTON_ON, button_get_state(dev));
+
+       return 0;
+}
+DM_TEST(dm_test_button_keys_adc, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);