usb: disable port power control if not supported in wHubCharacteristics

A hub indicates whether it supports per-port power control via the
wHubCharacteristics field in its descriptor.  If it is not supported
a hub will still emulate ClearPortPower(PORT_POWER) requests by
stopping the link state machine.  However, since this does not save
power do not bother suspending.

This also consolidates support checks into a
hub_is_port_power_switchable() helper.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 9262c19d14c433a6a1ba25c3ff897cb89e412309)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c4e94d3..64154f3 100644 (file)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -809,8 +809,6 @@ static unsigned hub_power_on(struct usb_hub *hub, bool do_delay)
        int port1;
        unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
        unsigned delay;
-       u16 wHubCharacteristics =
-                       le16_to_cpu(hub->descriptor->wHubCharacteristics);
 
        /* Enable power on each port.  Some hubs have reserved values
         * of LPSM (> 2) in their descriptors, even though they are
@@ -818,7 +816,7 @@ static unsigned hub_power_on(struct usb_hub *hub, bool do_delay)
         * but only emulate it.  In all cases, the ports won't work
         * unless we send these messages to the hub.
         */
-       if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2)
+       if (hub_is_port_power_switchable(hub))
                dev_dbg(hub->intfdev, "enabling power on all ports\n");
        else
                dev_dbg(hub->intfdev, "trying to enable port power on "
@@ -4460,8 +4458,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
        struct usb_device *hdev = hub->hdev;
        struct device *hub_dev = hub->intfdev;
        struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
-       unsigned wHubCharacteristics =
-                       le16_to_cpu(hub->descriptor->wHubCharacteristics);
        struct usb_device *udev;
        int status, i;
        unsigned unit_load;
@@ -4546,7 +4542,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
                        test_bit(port1, hub->removed_bits)) {
 
                /* maybe switch power back on (e.g. root hub was reset) */
-               if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
+               if (hub_is_port_power_switchable(hub)
                                && !port_is_power_on(hub, portstatus))
                        set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 

diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index df629a3..baf5b48 100644 (file)
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -111,6 +111,16 @@ extern int hub_port_debounce(struct usb_hub *hub, int port1,
 extern int usb_clear_port_feature(struct usb_device *hdev,
                int port1, int feature);
 
+static inline bool hub_is_port_power_switchable(struct usb_hub *hub)
+{
+       __le16 hcs;
+
+       if (!hub)
+               return false;
+       hcs = hub->descriptor->wHubCharacteristics;
+       return (le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM;
+}
+
 static inline int hub_port_debounce_be_connected(struct usb_hub *hub,
                int port1)
 {

diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 51542f8..3a7dd99 100644 (file)
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -171,12 +171,15 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 
        pm_runtime_set_active(&port_dev->dev);
 
-       /* It would be dangerous if user space couldn't
-        * prevent usb device from being powered off. So don't
-        * enable port runtime pm if failed to expose port's pm qos.
+       /*
+        * Do not enable port runtime pm if the hub does not support
+        * power switching.  Also, userspace must have final say of
+        * whether a port is permitted to power-off.  Do not enable
+        * runtime pm if we fail to expose pm_qos_no_power_off.
         */
-       if (!dev_pm_qos_expose_flags(&port_dev->dev,
-                       PM_QOS_FLAG_NO_POWER_OFF))
+       if (hub_is_port_power_switchable(hub)
+                       && dev_pm_qos_expose_flags(&port_dev->dev,
+                       PM_QOS_FLAG_NO_POWER_OFF) == 0)
                pm_runtime_enable(&port_dev->dev);
 
        device_enable_async_suspend(&port_dev->dev);