... and call node_dev_init() after memory_dev_init() from driver_init(),
so before any of the existing arch/subsys calls. All online nodes should
be known at that point: early during boot, arch code determines node and
zone ranges and sets the relevant nodes online; usually this happens in
setup_arch().
This is in line with memory_dev_init(), which initializes the memory
device subsystem and creates all memory block devices.
Similar to memory_dev_init(), panic() if anything goes wrong, we don't
want to continue with such basic initialization errors.
The important part is that node_dev_init() gets called after
memory_dev_init() and after cpu_dev_init(), but before any of the relevant
archs call register_cpu() to register the new cpu device under the node
device. The latter should be the case for the current users of
topology_init().
Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Anatoly Pugachev <matorola@gmail.com> (sparc64)
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
{
int i;
- for_each_online_node(i)
- register_one_node(i);
-
for_each_possible_cpu(i) {
struct cpu *cpu = &per_cpu(cpu_data.cpu, i);
cpu->hotpluggable = cpu_can_disable(i);
{
int i, err = 0;
-#ifdef CONFIG_NUMA
- /*
- * MCD - Do we want to register all ONLINE nodes, or all POSSIBLE nodes?
- */
- for_each_online_node(i) {
- if ((err = register_one_node(i)))
- goto out;
- }
-#endif
-
sysfs_cpus = kcalloc(NR_CPUS, sizeof(struct ia64_cpu), GFP_KERNEL);
if (!sysfs_cpus)
panic("kzalloc in topology_init failed - NR_CPUS too big?");
{
int i, ret;
-#ifdef CONFIG_NUMA
- for_each_online_node(i)
- register_one_node(i);
-#endif /* CONFIG_NUMA */
-
for_each_present_cpu(i) {
struct cpu *c = &per_cpu(cpu_devices, i);
/* NUMA stuff */
#ifdef CONFIG_NUMA
-static void __init register_nodes(void)
-{
- int i;
-
- for (i = 0; i < MAX_NUMNODES; i++)
- register_one_node(i);
-}
-
int sysfs_add_device_to_node(struct device *dev, int nid)
{
struct node *node = node_devices[nid];
sysfs_remove_link(&node->dev.kobj, kobject_name(&dev->kobj));
}
EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node);
-
-#else
-static void __init register_nodes(void)
-{
- return;
-}
-
#endif
/* Only valid if CPU is present. */
{
int cpu, r;
- register_nodes();
-
for_each_possible_cpu(cpu) {
struct cpu *c = &per_cpu(cpu_devices, cpu);
{
int i, ret;
- for_each_online_node(i)
- register_one_node(i);
-
for_each_possible_cpu(i) {
struct cpu *cpu = &per_cpu(cpu_devices, i);
NODE_DATA(0)->node_spanned_pages = memblock_end_of_DRAM() >> PAGE_SHIFT;
NODE_DATA(0)->node_id = 0;
}
-
-static int __init numa_init_late(void)
-{
- register_one_node(0);
- return 0;
-}
-arch_initcall(numa_init_late);
{
int i, ret;
-#ifdef CONFIG_NUMA
- for_each_online_node(i)
- register_one_node(i);
-#endif
-
for_each_present_cpu(i) {
struct cpu *c = &per_cpu(cpu_devices, i);
mmu_stats_supported = 1;
}
-static void register_nodes(void)
-{
-#ifdef CONFIG_NUMA
- int i;
-
- for (i = 0; i < MAX_NUMNODES; i++)
- register_one_node(i);
-#endif
-}
-
static int __init topology_init(void)
{
int cpu, ret;
- register_nodes();
-
check_mmu_stats();
for_each_possible_cpu(cpu) {
{
int i;
-#ifdef CONFIG_NUMA
- for_each_online_node(i)
- register_one_node(i);
-#endif
-
for_each_present_cpu(i)
arch_register_cpu(i);
auxiliary_bus_init();
cpu_dev_init();
memory_dev_init();
+ node_dev_init();
container_dev_init();
}
};
#define NODE_CALLBACK_PRI 2 /* lower than SLAB */
-static int __init register_node_type(void)
+void __init node_dev_init(void)
{
- int ret;
+ static struct notifier_block node_memory_callback_nb = {
+ .notifier_call = node_memory_callback,
+ .priority = NODE_CALLBACK_PRI,
+ };
+ int ret, i;
BUILD_BUG_ON(ARRAY_SIZE(node_state_attr) != NR_NODE_STATES);
BUILD_BUG_ON(ARRAY_SIZE(node_state_attrs)-1 != NR_NODE_STATES);
ret = subsys_system_register(&node_subsys, cpu_root_attr_groups);
- if (!ret) {
- static struct notifier_block node_memory_callback_nb = {
- .notifier_call = node_memory_callback,
- .priority = NODE_CALLBACK_PRI,
- };
- register_hotmemory_notifier(&node_memory_callback_nb);
- }
+ if (ret)
+ panic("%s() failed to register subsystem: %d\n", __func__, ret);
+
+ register_hotmemory_notifier(&node_memory_callback_nb);
/*
- * Note: we're not going to unregister the node class if we fail
- * to register the node state class attribute files.
+ * Create all node devices, which will properly link the node
+ * to applicable memory block devices and already created cpu devices.
*/
- return ret;
+ for_each_online_node(i) {
+ ret = register_one_node(i);
+ if (ret)
+ panic("%s() failed to add node: %d\n", __func__, ret);
+ }
}
-postcore_initcall(register_node_type);
extern void unregister_node(struct node *node);
#ifdef CONFIG_NUMA
+extern void node_dev_init(void);
/* Core of the node registration - only memory hotplug should use this */
extern int __register_one_node(int nid);
node_registration_func_t unregister);
#endif
#else
+static inline void node_dev_init(void)
+{
+}
static inline int __register_one_node(int nid)
{
return 0;