include/configs: Use new CONFIG_CMD_* in 85xx board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 9176be3..f103e47 100644 (file)
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -407,37 +407,24 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
 #if defined(CFG_RAMBOOT)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_PCI          \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #else
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_PCI           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #else
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -448,7 +435,7 @@
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size */
@@ -469,7 +456,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -481,7 +468,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index b568cb4..dea061a 100644 (file)
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -259,26 +259,24 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change        */
 
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-#if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       ((CONFIG_CMD_DFL | CFG_CMD_PING \
-                               | CFG_CMD_PCI | CFG_CMD_I2C ) & \
-                                ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
-#else
-#define  CONFIG_COMMANDS       ((CONFIG_CMD_DFL | CFG_CMD_PING \
-                               | CFG_CMD_I2C ) & \
-                                ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
-#endif
-#else
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL | CFG_CMD_PCI \
-                               | CFG_CMD_PING | CFG_CMD_I2C )
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
+    #define CONFIG_CMD_PCI
 #endif
+
+#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -288,7 +286,7 @@
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_LOAD_ADDR   0x2000000       /* default load address */
 #define CFG_PROMPT     "MPC8540EVAL=> "/* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -308,7 +306,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE        32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 #endif
 
@@ -320,7 +318,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index e047e25..5f12eee 100644 (file)
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -401,19 +401,19 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PCI \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
+    #define CONFIG_CMD_PCI
 #endif
-#include <cmd_confdefs.h>
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -423,7 +423,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_LONGHELP                   /* undef to save memory */
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size */
@@ -443,7 +443,7 @@ extern unsigned long get_clock_freq(void);
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE        32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -455,7 +455,7 @@ extern unsigned long get_clock_freq(void);
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 7cd62e9..b33d225 100644 (file)
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -392,21 +392,22 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-#define        CONFIG_COMMANDS (CONFIG_CMD_DFL \
-                               | CFG_CMD_PCI \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII \
-                               | CFG_CMD_BEDBUG \
-                               | CFG_CMD_NET)
-#else
-#define        CONFIG_COMMANDS (CONFIG_CMD_DFL \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
+    #define CONFIG_CMD_PCI
+    #define CONFIG_CMD_BEDBUG
+    #define CONFIG_CMD_NET
 #endif
-#include <cmd_confdefs.h>
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -416,7 +417,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CFG_LONGHELP                   /* undef to save memory */
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size */
@@ -436,7 +437,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE        32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -448,7 +449,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index a0d291e..cef92d2 100644 (file)
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -427,19 +427,19 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PCI \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
+    #define CONFIG_CMD_PCI
 #endif
-#include <cmd_confdefs.h>
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -449,7 +449,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_LONGHELP                   /* undef to save memory */
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size */
@@ -469,7 +469,7 @@ extern unsigned long get_clock_freq(void);
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE        32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -481,7 +481,7 @@ extern unsigned long get_clock_freq(void);
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index b7e703c..077aaa3 100644 (file)
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -401,19 +401,19 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PCI \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
+    #define CONFIG_CMD_PCI
 #endif
-#include <cmd_confdefs.h>
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -423,7 +423,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_LONGHELP                   /* undef to save memory */
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size */
@@ -443,7 +443,7 @@ extern unsigned long get_clock_freq(void);
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE        32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -455,7 +455,7 @@ extern unsigned long get_clock_freq(void);
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 043397f..affe535 100644 (file)
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -432,46 +432,27 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_ETHER_ON_FCC)
+    #define CONFIG_CMD_MII
+#endif
+
 #if defined(CFG_RAMBOOT)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_PCI          \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #elif defined(CONFIG_TSEC_ENET)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)          \
-                               & ~(CFG_CMD_ENV))
-  #elif defined(CONFIG_ETHER_ON_FCC)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_MII          \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_I2C)         \
-                               & ~(CFG_CMD_ENV))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_PCI           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #elif defined(CONFIG_TSEC_ENET)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #elif defined(CONFIG_ETHER_ON_FCC)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_MII           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -482,7 +463,7 @@
 #define CFG_LOAD_ADDR  0x1000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size */
@@ -503,7 +484,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -515,7 +496,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 0ff0416..41b1ae1 100644 (file)
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -383,19 +383,20 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PCI \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL \
-                               | CFG_CMD_PING \
-                               | CFG_CMD_I2C \
-                               | CFG_CMD_MII)
+    #define CONFIG_CMD_PCI
 #endif
-#include <cmd_confdefs.h>
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -405,7 +406,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_LONGHELP                   /* undef to save memory */
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE     256                     /* Console I/O Buffer Size */
@@ -425,7 +426,7 @@ extern unsigned long get_clock_freq(void);
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE        32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -437,7 +438,7 @@ extern unsigned long get_clock_freq(void);
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index 8f130f5..d79dd76 100644 (file)
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -303,43 +303,27 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
 #if defined(CFG_RAMBOOT)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_PCI          \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #else
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_EEPROM        \
-                               | CFG_CMD_DATE          \
-                               | CFG_CMD_MII           \
-                               | CFG_CMD_PCI           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #else
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_EEPROM        \
-                               | CFG_CMD_DATE          \
-                               | CFG_CMD_MII           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -350,7 +334,7 @@
 #define CFG_LOAD_ADDR  0x2000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size */
@@ -372,7 +356,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -384,7 +368,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 0286b53..5681d43 100644 (file)
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -306,41 +306,26 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
 #if defined(CFG_RAMBOOT)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_PCI          \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #else
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_EEPROM        \
-                               | CFG_CMD_DATE          \
-                               | CFG_CMD_PCI           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #else
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_EEPROM        \
-                               | CFG_CMD_DATE          \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -351,7 +336,7 @@
 #define CFG_LOAD_ADDR  0x1000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size */
@@ -373,7 +358,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -385,7 +370,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index f8e3397..a5397c2 100644 (file)
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -338,28 +338,28 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change        */
 
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
-                               CFG_CMD_PING | CFG_CMD_I2C) & \
-                                ~(CFG_CMD_ENV | \
-                                 CFG_CMD_LOADS ))
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL | CFG_CMD_MII | \
-                               CFG_CMD_PING | CFG_CMD_I2C) & \
-                               ~(CFG_CMD_ENV))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL | CFG_CMD_PCI | \
-                               CFG_CMD_PING | CFG_CMD_I2C)
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL | CFG_CMD_MII | \
-                               CFG_CMD_PING | CFG_CMD_I2C)
-  #endif
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+    #define CONFIG_CMD_MII
+#endif
+
+#if defined(CFG_RAMBOOT)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -368,7 +368,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "SBC8540=> " /* Monitor Command Prompt  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
   #define CFG_CBSIZE   1024            /* Console I/O Buffer Size      */
 #else
   #define CFG_CBSIZE   256             /* Console I/O Buffer Size      */
@@ -389,7 +389,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
   #define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
 #endif
 
@@ -401,7 +401,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
   #define CONFIG_KGDB_BAUDRATE 230400  /* speed to run kgdb serial port */
   #define CONFIG_KGDB_SER_INDEX        2       /* which serial port to use */
 #endif

diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index b0b9dd3..b17d5e3 100644 (file)
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -357,24 +357,26 @@
 
 #define        CONFIG_TIMESTAMP                /* Print image info with ts     */
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-# define ADD_PCI_CMD           (CFG_CMD_PCI)
-#else
-# define ADD_PCI_CMD           0
+    #define CONFIG_CMD_PCI
 #endif
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_DHCP   | \
-                                CFG_CMD_NFS    | \
-                                CFG_CMD_SNTP   | \
-                                ADD_PCI_CMD    | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_DATE   | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_DTT    | \
-                                CFG_CMD_MII    | \
-                                CFG_CMD_PING   )
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -385,7 +387,7 @@
 #define CFG_LOAD_ADDR  0x2000000       /* default load address         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size      */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size      */
@@ -406,7 +408,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value */
 #endif
 
@@ -418,7 +420,7 @@
 #define BOOTFLAG_COLD  0x01            /* Power-On: Boot from FLASH    */
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port*/
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use     */
 #endif

diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 6e4fdb2..ad610f0 100644 (file)
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -320,28 +320,28 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change        */
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+    #define CONFIG_CMD_MII
+#endif
+
 #if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
-                               CFG_CMD_PING | CFG_CMD_I2C) & \
-                                ~(CFG_CMD_ENV | \
-                                 CFG_CMD_LOADS ))
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL | CFG_CMD_MII | \
-                               CFG_CMD_PING | CFG_CMD_I2C) & \
-                               ~(CFG_CMD_ENV))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL | CFG_CMD_PCI | \
-                               CFG_CMD_PING | CFG_CMD_I2C)
-  #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC))
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL | CFG_CMD_MII | \
-                               CFG_CMD_PING | CFG_CMD_I2C)
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -350,7 +350,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "SBC8560=> " /* Monitor Command Prompt  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
   #define CFG_CBSIZE   1024            /* Console I/O Buffer Size      */
 #else
   #define CFG_CBSIZE   256             /* Console I/O Buffer Size      */
@@ -371,7 +371,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
   #define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
 #endif
 
@@ -383,7 +383,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
   #define CONFIG_KGDB_BAUDRATE 230400  /* speed to run kgdb serial port */
   #define CONFIG_KGDB_SER_INDEX        2       /* which serial port to use */
 #endif

diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 21065b9..9c55844 100644 (file)
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -298,34 +298,29 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change        */
 
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
 #if defined(CFG_RAMBOOT)
-  #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS     ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
-                               CFG_CMD_PING | CFG_CMD_I2C) & \
-                                ~(CFG_CMD_ENV | \
-                                 CFG_CMD_LOADS ))
-  #elif defined(CONFIG_TSEC_ENET)
-  #define  CONFIG_COMMANDS     ((CONFIG_CMD_DFL | CFG_CMD_PING | \
-                               CFG_CMD_MII | CFG_CMD_I2C ) & \
-                               ~(CFG_CMD_ENV))
-  #elif defined(CONFIG_ETHER_ON_FCC)
-  #define  CONFIG_COMMANDS     ((CONFIG_CMD_DFL | CFG_CMD_MII | \
-                               CFG_CMD_PING | CFG_CMD_I2C) & \
-                               ~(CFG_CMD_ENV))
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #else
-  #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS     (CONFIG_CMD_DFL | CFG_CMD_PCI | \
-                               CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
-  #elif defined(CONFIG_TSEC_ENET)
-  #define  CONFIG_COMMANDS     (CONFIG_CMD_DFL | CFG_CMD_PING | \
-                               CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C)
-  #elif defined(CONFIG_ETHER_ON_FCC)
-  #define  CONFIG_COMMANDS     (CONFIG_CMD_DFL | CFG_CMD_MII | \
-                               CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
-  #endif
+    #define CONFIG_CMD_ELF
+#endif
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
 #endif
-#include <cmd_confdefs.h>
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+    #define CONFIG_CMD_MII
+#endif
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -334,7 +329,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "GPPP=> "       /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -355,7 +350,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 #endif
 
@@ -367,7 +362,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index a14cd50..c88d534 100644 (file)
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -325,34 +325,30 @@
 
 #define        CONFIG_TIMESTAMP                /* Print image info with ts     */
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+    #define CONFIG_CMD_MII
+#endif
+
 #if defined(CFG_RAMBOOT)
-  #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS     ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
-                               CFG_CMD_PING | CFG_CMD_I2C) & \
-                                ~(CFG_CMD_ENV | \
-                                 CFG_CMD_LOADS ))
-  #elif defined(CONFIG_TSEC_ENET)
-  #define  CONFIG_COMMANDS     ((CONFIG_CMD_DFL | CFG_CMD_PING | \
-                               CFG_CMD_MII | CFG_CMD_I2C ) & \
-                               ~(CFG_CMD_ENV))
-  #elif defined(CONFIG_ETHER_ON_FCC)
-  #define  CONFIG_COMMANDS     ((CONFIG_CMD_DFL | CFG_CMD_MII | \
-                               CFG_CMD_PING | CFG_CMD_I2C) & \
-                               ~(CFG_CMD_ENV))
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #else
-  #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS     (CONFIG_CMD_DFL | CFG_CMD_PCI | \
-                               CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
-  #elif defined(CONFIG_TSEC_ENET)
-  #define  CONFIG_COMMANDS     (CONFIG_CMD_DFL | CFG_CMD_PING | \
-                               CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C)
-  #elif defined(CONFIG_ETHER_ON_FCC)
-  #define  CONFIG_COMMANDS     (CONFIG_CMD_DFL | CFG_CMD_MII | \
-                               CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
-  #endif
+    #define CONFIG_CMD_ELF
 #endif
-#include <cmd_confdefs.h>
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */