.off = OFF, \
.imm = 0 })
+/* Like BPF_JMP_REG, but with 32-bit wide operands for comparison. */
+
+#define BPF_JMP32_REG(OP, DST, SRC, OFF) \
+ ((struct bpf_insn) { \
+ .code = BPF_JMP32 | BPF_OP(OP) | BPF_X, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = OFF, \
+ .imm = 0 })
+
/* Conditional jumps against immediates, if (dst_reg 'op' imm32) goto pc + off16 */
#define BPF_JMP_IMM(OP, DST, IMM, OFF) \
.off = OFF, \
.imm = IMM })
+/* Like BPF_JMP_IMM, but with 32-bit wide operands for comparison. */
+
+#define BPF_JMP32_IMM(OP, DST, IMM, OFF) \
+ ((struct bpf_insn) { \
+ .code = BPF_JMP32 | BPF_OP(OP) | BPF_K, \
+ .dst_reg = DST, \
+ .src_reg = 0, \
+ .off = OFF, \
+ .imm = IMM })
+
#define BPF_JMP_A(OFF) \
((struct bpf_insn) { \
.code = BPF_JMP | BPF_JA, \
#define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff
#define DOWNSHIFT_DEV_DISABLE 0
+/* Time in msecs after which link is reported as down
+ * 0 = lowest time supported by the PHY
+ * 0xff = off, link down detection according to standard
+ */
+#define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0
+#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff
+
enum phy_tunable_id {
ETHTOOL_PHY_ID_UNSPEC,
ETHTOOL_PHY_DOWNSHIFT,
+ ETHTOOL_PHY_FAST_LINK_DOWN,
/*
* Add your fresh new phy tunable attribute above and remember to update
* phy_tunable_strings[] in net/core/ethtool.c
ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29,
ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30,
ETHTOOL_LINK_MODE_25000baseCR_Full_BIT = 31,
+
+ /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
+ * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
+ * macro for bits > 31. The only way to use indices > 31 is to
+ * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
+ */
+
ETHTOOL_LINK_MODE_25000baseKR_Full_BIT = 32,
ETHTOOL_LINK_MODE_25000baseSR_Full_BIT = 33,
ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT = 34,
ETHTOOL_LINK_MODE_FEC_NONE_BIT = 49,
ETHTOOL_LINK_MODE_FEC_RS_BIT = 50,
ETHTOOL_LINK_MODE_FEC_BASER_BIT = 51,
-
- /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
- * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
- * macro for bits > 31. The only way to use indices > 31 is to
- * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
- */
-
- __ETHTOOL_LINK_MODE_LAST
- = ETHTOOL_LINK_MODE_FEC_BASER_BIT,
+ ETHTOOL_LINK_MODE_50000baseKR_Full_BIT = 52,
+ ETHTOOL_LINK_MODE_50000baseSR_Full_BIT = 53,
+ ETHTOOL_LINK_MODE_50000baseCR_Full_BIT = 54,
+ ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT = 55,
+ ETHTOOL_LINK_MODE_50000baseDR_Full_BIT = 56,
+ ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT = 57,
+ ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT = 58,
+ ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT = 59,
+ ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT = 60,
+ ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT = 61,
+ ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT = 62,
+ ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT = 63,
+ ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT = 64,
+ ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT = 65,
+ ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT = 66,
+
+ /* must be last entry */
+ __ETHTOOL_LINK_MODE_MASK_NBITS
};
#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \
#define SPEED_50000 50000
#define SPEED_56000 56000
#define SPEED_100000 100000
+#define SPEED_200000 200000
-#define SPEED_UNKNOWN ((__u32) -1)
+#define SPEED_UNKNOWN -1
static inline int ethtool_validate_speed(__u32 speed)
{
- return speed <= INT_MAX || speed == SPEED_UNKNOWN;
+ return speed <= INT_MAX || speed == (__u32)SPEED_UNKNOWN;
}
/* Duplex, half or full. */
#define ETH_MODULE_SFF_8436 0x4
#define ETH_MODULE_SFF_8436_LEN 256
+#define ETH_MODULE_SFF_8636_MAX_LEN 640
+#define ETH_MODULE_SFF_8436_MAX_LEN 640
+
/* Reset flags */
/* The reset() operation must clear the flags for the components which
* were actually reset. On successful return, the flags indicate the