ARM: dts: qcom: sdx65: move status properties to end of nodes
authorAlex Elder <elder@linaro.org>
Mon, 27 Mar 2023 19:56:05 +0000 (14:56 -0500)
committerBjorn Andersson <andersson@kernel.org>
Thu, 6 Apr 2023 16:58:40 +0000 (09:58 -0700)
Move a few device tree "status" properties so that they are the last
specified property, in "qcom-sdx65-mtp.dts" and "qcom-sdx65.dtsi".
Note that properties must always be specified before sub-nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327195605.2854123-3-elder@linaro.org
arch/arm/boot/dts/qcom-sdx65-mtp.dts
arch/arm/boot/dts/qcom-sdx65.dtsi

index 72e25de..57bc3b0 100644 (file)
 };
 
 &remoteproc_mpss {
-       status = "okay";
        memory-region = <&mpss_adsp_mem>;
+       status = "okay";
 };
 
 &usb {
 };
 
 &usb_hsphy {
-       status = "okay";
        vdda-pll-supply = <&vreg_l4b_0p88>;
        vdda33-supply = <&vreg_l10b_3p08>;
        vdda18-supply = <&vreg_l5b_1p8>;
+       status = "okay";
 };
 
 &usb_qmpphy {
-       status = "okay";
        vdda-phy-supply = <&vreg_l4b_0p88>;
        vdda-pll-supply = <&vreg_l1b_1p2>;
+       status = "okay";
 };
index 74671cc..525dd8a 100644 (file)
                                     "qcom,usb-snps-hs-7nm-phy";
                        reg = <0xff4000 0x120>;
                        #phy-cells = <0>;
-                       status = "disabled";
                        clocks = <&rpmhcc RPMH_CXO_CLK>;
                        clock-names = "ref";
                        resets = <&gcc GCC_QUSB2PHY_BCR>;
+                       status = "disabled";
                };
 
                usb_qmpphy: phy@ff6000 {
                        compatible = "qcom,sdx65-qmp-usb3-uni-phy";
                        reg = <0x00ff6000 0x1c8>;
-                       status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges;
                                 <&gcc GCC_USB3_PHY_BCR>;
                        reset-names = "phy", "common";
 
+                       status = "disabled";
+
                        usb_ssphy: phy@ff6200 {
                                reg = <0x00ff6e00 0x160>,
                                      <0x00ff7000 0x1ec>,
                usb: usb@a6f8800 {
                        compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
                        reg = <0x0a6f8800 0x400>;
-                       status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges;
 
                        resets = <&gcc GCC_USB30_BCR>;
 
+                       status = "disabled";
+
                        usb_dwc3: usb@a600000 {
                                compatible = "snps,dwc3";
                                reg = <0x0a600000 0xcd00>;