#include <linux/regulator/consumer.h>
#include <linux/clk.h>
#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
#include <linux/tty.h>
#include <linux/interrupt.h>
#include <linux/dmi.h>
#endif
/* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */
+static struct gpiod_lookup_table asus_tf103c_irq_gpios = {
+ .dev_id = "serial0-0",
+ .table = {
+ GPIO_LOOKUP("INT33FC:02", 17, "host-wakeup-alt", GPIO_ACTIVE_HIGH),
+ { }
+ },
+};
+
static const struct dmi_system_id bcm_broken_irq_dmi_table[] = {
+ {
+ .ident = "Asus TF103C",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"),
+ },
+ .driver_data = &asus_tf103c_irq_gpios,
+ },
{
.ident = "Meegopad T08",
.matches = {
static int bcm_get_resources(struct bcm_device *dev)
{
- const struct dmi_system_id *dmi_id;
+ const struct dmi_system_id *broken_irq_dmi_id;
+ const char *irq_con_id = "host-wakeup";
int err;
dev->name = dev_name(dev->dev);
if (err)
return err;
+ broken_irq_dmi_id = dmi_first_match(bcm_broken_irq_dmi_table);
+ if (broken_irq_dmi_id && broken_irq_dmi_id->driver_data) {
+ gpiod_add_lookup_table(broken_irq_dmi_id->driver_data);
+ irq_con_id = "host-wakeup-alt";
+ dev->irq_active_low = false;
+ dev->irq = 0;
+ }
+
/* IRQ can be declared in ACPI table as Interrupt or GpioInt */
if (dev->irq <= 0) {
struct gpio_desc *gpio;
- gpio = devm_gpiod_get_optional(dev->dev, "host-wakeup",
- GPIOD_IN);
+ gpio = devm_gpiod_get_optional(dev->dev, irq_con_id, GPIOD_IN);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
dev->irq = gpiod_to_irq(gpio);
}
- dmi_id = dmi_first_match(bcm_broken_irq_dmi_table);
- if (dmi_id) {
- dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n",
- dmi_id->ident);
- dev->irq = 0;
+ if (broken_irq_dmi_id) {
+ if (broken_irq_dmi_id->driver_data) {
+ gpiod_remove_lookup_table(broken_irq_dmi_id->driver_data);
+ } else {
+ dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n",
+ broken_irq_dmi_id->ident);
+ dev->irq = 0;
+ }
}
dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq);