* mips.h: Document "+i".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
"jalx".
* mips16-opc.c (mips16_opcodes): Likewise.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_mips16_insn_arg)
(print_insn_mips16): Handle "+i".
(print_insn_micromips): Likewise. Conditionally preserve the
ISA bit for "a" but not for "+i".
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
(mips_ip, mips16_ip): Handle "+i".
2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
+ (mips_ip, mips16_ip): Handle "+i".
+
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
* config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete.
(micromips_to_32_reg_h_map): Rename to...
(micromips_to_32_reg_h_map1): ...this.
case 'a': USE_BITS (OP_MASK_OFFSET_A, OP_SH_OFFSET_A); break;
case 'b': USE_BITS (OP_MASK_OFFSET_B, OP_SH_OFFSET_B); break;
case 'c': USE_BITS (OP_MASK_OFFSET_C, OP_SH_OFFSET_C); break;
+ case 'i': USE_BITS (OP_MASK_TARGET, OP_SH_TARGET); break;
case 'j': USE_BITS (OP_MASK_EVAOFFSET, OP_SH_EVAOFFSET); break;
default:
case 'F': USE_BITS (INSMSB); break;
case 'G': USE_BITS (EXTMSBD); break;
case 'H': USE_BITS (EXTMSBD); break;
+ case 'i': USE_BITS (TARGET); break;
case 'j': USE_BITS (EVAOFFSET); break;
default:
as_bad (_("Internal error: bad mips opcode "
INSERT_OPERAND (0, FZ, *ip, regno);
continue;
+ case 'i':
+ goto jump;
+
case 'j':
{
int shift = 8;
continue;
case 'a': /* 26-bit address. */
+ jump:
*offset_reloc = BFD_RELOC_MIPS_JMP;
my_getExpression (&offset_expr, s);
s = expr_end;
continue;
case 'a': /* 26 bit address */
+ case 'i':
my_getExpression (&offset_expr, s);
s = expr_end;
*offset_reloc = BFD_RELOC_MIPS16_JMP;
2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+ * mips.h: Document "+i".
+
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
* mips.h: Remove "mi" documentation. Update "mh" documentation.
(OP_MASK_MI, OP_SH_MI, MICROMIPSOP_MASK_MI, MICROMIPSOP_MASK_MI):
Delete.
"<" 5 bit shift amount (OP_*_SHAMT)
">" shift amount between 32 and 63, stored after subtracting 32 (OP_*_SHAMT)
"a" 26 bit target address (OP_*_TARGET)
+ "+i" likewise, but flips bit 0
"b" 5 bit base register (OP_*_RS)
"c" 10 bit breakpoint code (OP_*_CODE)
"d" 5 bit destination register specifier (OP_*_RD)
following), for quick reference when adding more:
"1234"
"ABCEFGHIJPQSXZ"
- "abcjpstxz"
+ "abcijpstxz"
*/
/* These are the bits which may be set in the pinfo field of an
"Y" 5 bit MIPS register (MIPS16OP_*_REG32R)
"6" 6 bit unsigned break code (MIPS16OP_*_IMM6)
"a" 26 bit jump address
+ "i" likewise, but flips bit 0
"e" 11 bit extension value
"l" register list for entry instruction
"L" register list for exit instruction
"|" 4-bit trap code (MICROMIPSOP_*_TRAP)
"~" 12-bit signed offset (MICROMIPSOP_*_OFFSET12)
"a" 26-bit target address (MICROMIPSOP_*_TARGET)
+ "+i" likewise, but flips bit 0
"b" 5-bit base register (MICROMIPSOP_*_RS)
"c" 10-bit higher breakpoint code (MICROMIPSOP_*_CODE)
"d" 5-bit destination register specifier (MICROMIPSOP_*_RD)
Extension character sequences used so far ("+" followed by the
following), for quick reference when adding more:
- "j"
""
- "ABCEFGHI"
""
+ "ABCEFGHI"
+ "ij"
Extension character sequences used so far ("m" followed by the
following), for quick reference when adding more:
2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+ * mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
+ "jalx".
+ * mips16-opc.c (mips16_opcodes): Likewise.
+ * micromips-opc.c (micromips_opcodes): Likewise.
+ * mips-dis.c (print_insn_args, print_mips16_insn_arg)
+ (print_insn_mips16): Handle "+i".
+ (print_insn_micromips): Likewise. Conditionally preserve the
+ ISA bit for "a" but not for "+i".
+
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
* micromips-opc.c (WR_mhi): Rename to..
(WR_mh): ...this.
(micromips_opcodes): Update "movep" entry accordingly. Replace
{"jals", "s", 0, (int) M_JALS_1, INSN_MACRO, 0, I1 },
{"jals", "a", 0, (int) M_JALS_A, INSN_MACRO, 0, I1 },
{"jals", "a", 0x74000000, 0xfc000000, UBD|WR_31, BD16, I1 },
-{"jalx", "a", 0xf0000000, 0xfc000000, UBD|WR_31, BD32, I1 },
+{"jalx", "+i", 0xf0000000, 0xfc000000, UBD|WR_31, BD32, I1 },
{"la", "t,A(b)", 0, (int) M_LA_AB, INSN_MACRO, 0, I1 },
{"lb", "t,o(b)", 0x1c000000, 0xfc000000, RD_b|WR_t, 0, I1 },
{"lb", "t,A(b)", 0, (int) M_LB_AB, INSN_MACRO, 0, I1 },
infprintf (is, "%s", mips_fpr_names[GET_OP (l, FZ)]);
break;
+ case 'i': /* JALX destination */
+ info->target = (((pc + 4) & ~(bfd_vma) 0x0fffffff)
+ | (GET_OP (l, TARGET) << 2));
+ /* For gdb disassembler, force odd address on jalx. */
+ if (info->flavour == bfd_target_unknown_flavour)
+ info->target |= 1;
+ (*info->print_address_func) (info->target, info);
+ break;
+
case 'j': /* 9-bit signed offset in bit 7. */
infprintf (is, "%d", GET_OP_S (l, EVAOFFSET));
break;
case 'a':
info->target = (((pc + 4) & ~(bfd_vma) 0x0fffffff)
| (GET_OP (l, TARGET) << 2));
- /* For gdb disassembler, force odd address on jalx. */
- if (info->flavour == bfd_target_unknown_flavour
- && strcmp (opp->name, "jalx") == 0)
- info->target |= 1;
(*info->print_address_func) (info->target, info);
break;
break;
case 'a':
+ case 'i':
{
- int jalx = l & 0x400;
-
if (! use_extend)
extend = 0;
l = ((l & 0x1f) << 23) | ((l & 0x3e0) << 13) | (extend << 2);
- if (!jalx && info->flavour == bfd_target_unknown_flavour)
+ if (type == 'a' && info->flavour == bfd_target_unknown_flavour)
/* For gdb disassembler, maintain odd address. */
l |= 1;
}
{
const char *s;
- if (strchr (op->args, 'a') != NULL)
+ if (op->args[0] == 'a' || op->args[0] == 'i')
{
if (use_extend)
{
break;
case 'a':
- if (strcmp (op->name, "jalx") == 0)
- info->target = (((memaddr + 4) & ~(bfd_vma) 0x0fffffff)
- | (GET_OP (insn, TARGET) << 2));
- else
- info->target = (((memaddr + 4) & ~(bfd_vma) 0x07ffffff)
- | (GET_OP (insn, TARGET) << 1));
- /* For gdb disassembler, force odd address on jalx. */
- if (info->flavour == bfd_target_unknown_flavour
- && strcmp (op->name, "jalx") == 0)
+ info->target = (((memaddr + 4) & ~(bfd_vma) 0x07ffffff)
+ | (GET_OP (insn, TARGET) << 1));
+ /* For gdb disassembler, maintain odd address. */
+ if (info->flavour == bfd_target_unknown_flavour)
info->target |= 1;
(*info->print_address_func) (info->target, info);
break;
infprintf (is, "0x%x", msbd + 1);
break;
+ case 'i':
+ info->target = (((memaddr + 4) & ~(bfd_vma) 0x0fffffff)
+ | (GET_OP (insn, TARGET) << 2));
+ (*info->print_address_func) (info->target, info);
+ break;
+
case 'j': /* 9-bit signed offset in bit 0. */
delta = GET_OP_S (insn, EVAOFFSET);
infprintf (is, "%d", delta);
assembler, but will never match user input (because the line above
will match first). */
{"jal", "a", 0x0c000000, 0xfc000000, UBD|WR_31, 0, I1 },
-{"jalx", "a", 0x74000000, 0xfc000000, UBD|WR_31, 0, I1 },
+{"jalx", "+i", 0x74000000, 0xfc000000, UBD|WR_31, 0, I1 },
{"la", "t,A(b)", 0, (int) M_LA_AB, INSN_MACRO, 0, I1 },
{"laa", "d,(b),t", 0x7000049f, 0xfc0007ff, LDD|SM|WR_d|RD_t|RD_b, 0, IOCT2 },
{"laad", "d,(b),t", 0x700004df, 0xfc0007ff, LDD|SM|WR_d|RD_t|RD_b, 0, IOCT2 },
{"jal", "x", 0xe840, 0xf8ff, UBD|WR_31|RD_x, 0, I1 },
{"jal", "R,x", 0xe840, 0xf8ff, UBD|WR_31|RD_x, 0, I1 },
{"jal", "a", 0x1800, 0xfc00, UBD|WR_31, 0, I1 },
-{"jalx", "a", 0x1c00, 0xfc00, UBD|WR_31, 0, I1 },
+{"jalx", "i", 0x1c00, 0xfc00, UBD|WR_31, 0, I1 },
{"jr", "x", 0xe800, 0xf8ff, UBD|RD_x, 0, I1 },
{"jr", "R", 0xe820, 0xffff, UBD|RD_31, 0, I1 },
{"j", "x", 0xe800, 0xf8ff, UBD|RD_x, 0, I1 },