Merge tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux...

Fixes for omaps for v5.4-rc cycle

More fixes for omap variants:

- Update more panel options in omap2plus_defconfig that got changed
  as we moved to use generic LCD panels

- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
  time warnings. This is only a cosmetic fix, but at least dmesg output
  is now getting more readable after all the fixes to remove pointless
  warnings

- Fix gpu_cm node name as we still have a non-standard node name
  dependency for clocks. This should eventually get fixed by use
  of domain specific compatible property

- Fix use of i2c-mux-idle-disconnect for m3874-iceboard

- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
  interrupts

* tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Use level interrupt for omap4 & 5 wlcore
  ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
  ARM: dts: omap5: fix gpu_cm clock provider name
  ARM: dts: logicpd-torpedo-som: Remove twl_keypad
  ARM: omap2plus_defconfig: Fix selected panels after generic panel changes

Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index a53657b..bda454d 100644 (file)
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/mfd/dbx500-prcmu.h>
 #include <dt-bindings/arm/ux500_pm_domains.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
        #address-cells = <1>;
@@ -59,8 +60,12 @@
                 * cooling.
                 */
                cpu_thermal: cpu-thermal {
-                       polling-delay-passive = <0>;
-                       polling-delay = <1000>;
+                       polling-delay-passive = <250>;
+                       /*
+                        * This sensor fires interrupts to update the thermal
+                        * zone, so no polling is needed.
+                        */
+                       polling-delay = <0>;
 
                        thermal-sensors = <&thermal>;
 
@@ -79,7 +84,7 @@
 
                        cooling-maps {
                                trip = <&cpu_alert>;
-                               cooling-device = <&CPU0 0 2>;
+                               cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
                                contribution = <100>;
                        };
                };

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index b34970c..01e3c0f 100644 (file)
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -228,7 +228,7 @@ CONFIG_RTC_DRV_OMAP=m
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
 CONFIG_COMMON_CLK_PWM=m
-CONFIG_REMOTEPROC=m
+CONFIG_REMOTEPROC=y
 CONFIG_DA8XX_REMOTEPROC=m
 CONFIG_MEMORY=y
 CONFIG_TI_AEMIF=m

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 13ba532..e4c8def 100644 (file)
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -415,7 +415,7 @@ CONFIG_SPI_SH_MSIOF=m
 CONFIG_SPI_SH_HSPI=y
 CONFIG_SPI_SIRF=y
 CONFIG_SPI_STM32=m
-CONFIG_SPI_STM32_QSPI=m
+CONFIG_SPI_STM32_QSPI=y
 CONFIG_SPI_SUN4I=y
 CONFIG_SPI_SUN6I=y
 CONFIG_SPI_TEGRA114=y
@@ -933,7 +933,7 @@ CONFIG_BCM2835_MBOX=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
-CONFIG_REMOTEPROC=m
+CONFIG_REMOTEPROC=y
 CONFIG_ST_REMOTEPROC=m
 CONFIG_RPMSG_VIRTIO=m
 CONFIG_ASPEED_LPC_CTRL=m

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 4e7db25..40d7f1a 100644 (file)
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -484,7 +484,7 @@ CONFIG_RTC_DRV_OMAP=m
 CONFIG_RTC_DRV_CPCAP=m
 CONFIG_DMADEVICES=y
 CONFIG_OMAP_IOMMU=y
-CONFIG_REMOTEPROC=m
+CONFIG_REMOTEPROC=y
 CONFIG_OMAP_REMOTEPROC=m
 CONFIG_WKUP_M3_RPROC=m
 CONFIG_SOC_TI=y

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
index 8a3a770..56789cc 100644 (file)
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -42,13 +42,14 @@
 
                pinmux: pinmux@14029c {
                        compatible = "pinctrl-single";
-                       reg = <0x0014029c 0x250>;
+                       reg = <0x0014029c 0x26c>;
                        #address-cells = <1>;
                        #size-cells = <1>;
                        pinctrl-single,register-width = <32>;
                        pinctrl-single,function-mask = <0xf>;
                        pinctrl-single,gpio-range = <
-                               &range 0 154 MODE_GPIO
+                               &range 0  91 MODE_GPIO
+                               &range 95 60 MODE_GPIO
                                >;
                        range: gpio-range {
                                #pinctrl-single,gpio-range-cells = <3>;

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 71e2e34..0098dfd 100644 (file)
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -464,8 +464,7 @@
                                        <&pinmux 108 16 27>,
                                        <&pinmux 135 77 6>,
                                        <&pinmux 141 67 4>,
-                                       <&pinmux 145 149 6>,
-                                       <&pinmux 151 91 4>;
+                                       <&pinmux 145 149 6>;
                };
 
                i2c1: i2c@e0000 {

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index d105986..5f350cc 100644 (file)
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -60,11 +60,6 @@
                gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
        };
 
-       usb3_phy: usb3-phy {
-               compatible = "usb-nop-xceiv";
-               vcc-supply = <&exp_usb3_vbus>;
-       };
-
        vsdc_reg: vsdc-reg {
                compatible = "regulator-gpio";
                regulator-name = "vsdc";
@@ -255,10 +250,16 @@
        status = "okay";
 };
 
+&comphy2 {
+       connector {
+               compatible = "usb-a-connector";
+               phy-supply = <&exp_usb3_vbus>;
+       };
+};
+
 &usb3 {
        status = "okay";
        phys = <&comphy2 0>;
-       usb-phy = <&usb3_phy>;
 };
 
 &mdio {

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 8e05c39..c9a867a 100644 (file)
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -723,7 +723,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_ARM_SMMU=y
 CONFIG_ARM_SMMU_V3=y
 CONFIG_QCOM_IOMMU=y
-CONFIG_REMOTEPROC=m
+CONFIG_REMOTEPROC=y
 CONFIG_QCOM_Q6V5_MSS=m
 CONFIG_QCOM_Q6V5_PAS=m
 CONFIG_QCOM_SYSMON=m