#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/timer/stm32-timer-trigger.h>
#define STM32F4_EXTSEL_SHIFT 24
#define STM32F4_EXTSEL_MASK GENMASK(27, 24)
#define STM32F4_EOCS BIT(10)
+#define STM32F4_DDS BIT(9)
+#define STM32F4_DMA BIT(8)
#define STM32F4_ADON BIT(0)
#define STM32_ADC_MAX_SQ 16 /* SQ1..SQ16 */
#define STM32_ADC_TIMEOUT_US 100000
#define STM32_ADC_TIMEOUT (msecs_to_jiffies(STM32_ADC_TIMEOUT_US / 1000))
+#define STM32_DMA_BUFFER_SIZE PAGE_SIZE
+
/* External trigger enable */
enum stm32_adc_exten {
STM32_EXTEN_SWTRIG,
* @bufi: data buffer index
* @num_conv: expected number of scan conversions
* @trigger_polarity: external trigger polarity (e.g. exten)
+ * @dma_chan: dma channel
+ * @rx_buf: dma rx buffer cpu address
+ * @rx_dma_buf: dma rx buffer bus address
+ * @rx_buf_sz: dma rx buffer size
*/
struct stm32_adc {
struct stm32_adc_common *common;
unsigned int bufi;
unsigned int num_conv;
u32 trigger_polarity;
+ struct dma_chan *dma_chan;
+ u8 *rx_buf;
+ dma_addr_t rx_dma_buf;
+ unsigned int rx_buf_sz;
};
/**
/**
* stm32_adc_start_conv() - Start conversions for regular channels.
* @adc: stm32 adc instance
+ * @dma: use dma to transfer conversion result
+ *
+ * Start conversions for regular channels.
+ * Also take care of normal or DMA mode. Circular DMA may be used for regular
+ * conversions, in IIO buffer modes. Otherwise, use ADC interrupt with direct
+ * DR read instead (e.g. read_raw, or triggered buffer mode without DMA).
*/
-static void stm32_adc_start_conv(struct stm32_adc *adc)
+static void stm32_adc_start_conv(struct stm32_adc *adc, bool dma)
{
stm32_adc_set_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN);
+
+ if (dma)
+ stm32_adc_set_bits(adc, STM32F4_ADC_CR2,
+ STM32F4_DMA | STM32F4_DDS);
+
stm32_adc_set_bits(adc, STM32F4_ADC_CR2, STM32F4_EOCS | STM32F4_ADON);
/* Wait for Power-up time (tSTAB from datasheet) */
stm32_adc_clr_bits(adc, STM32F4_ADC_SR, STM32F4_STRT);
stm32_adc_clr_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN);
- stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, STM32F4_ADON);
+ stm32_adc_clr_bits(adc, STM32F4_ADC_CR2,
+ STM32F4_ADON | STM32F4_DMA | STM32F4_DDS);
}
/**
"rising-edge", "falling-edge", "both-edges",
};
-const struct iio_enum stm32_adc_trig_pol = {
+static const struct iio_enum stm32_adc_trig_pol = {
.items = stm32_trig_pol_items,
.num_items = ARRAY_SIZE(stm32_trig_pol_items),
.get = stm32_adc_get_trig_pol,
stm32_adc_conv_irq_enable(adc);
- stm32_adc_start_conv(adc);
+ stm32_adc_start_conv(adc, false);
timeout = wait_for_completion_interruptible_timeout(
&adc->completion, STM32_ADC_TIMEOUT);
return stm32_adc_get_trig_extsel(trig) < 0 ? -EINVAL : 0;
}
+static int stm32_adc_set_watermark(struct iio_dev *indio_dev, unsigned int val)
+{
+ struct stm32_adc *adc = iio_priv(indio_dev);
+ unsigned int watermark = STM32_DMA_BUFFER_SIZE / 2;
+
+ /*
+ * dma cyclic transfers are used, buffer is split into two periods.
+ * There should be :
+ * - always one buffer (period) dma is working on
+ * - one buffer (period) driver can push with iio_trigger_poll().
+ */
+ watermark = min(watermark, val * (unsigned)(sizeof(u16)));
+ adc->rx_buf_sz = watermark * 2;
+
+ return 0;
+}
+
static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
const unsigned long *scan_mask)
{
static const struct iio_info stm32_adc_iio_info = {
.read_raw = stm32_adc_read_raw,
.validate_trigger = stm32_adc_validate_trigger,
+ .hwfifo_set_watermark = stm32_adc_set_watermark,
.update_scan_mode = stm32_adc_update_scan_mode,
.debugfs_reg_access = stm32_adc_debugfs_reg_access,
.of_xlate = stm32_adc_of_xlate,
.driver_module = THIS_MODULE,
};
+static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
+{
+ struct dma_tx_state state;
+ enum dma_status status;
+
+ status = dmaengine_tx_status(adc->dma_chan,
+ adc->dma_chan->cookie,
+ &state);
+ if (status == DMA_IN_PROGRESS) {
+ /* Residue is size in bytes from end of buffer */
+ unsigned int i = adc->rx_buf_sz - state.residue;
+ unsigned int size;
+
+ /* Return available bytes */
+ if (i >= adc->bufi)
+ size = i - adc->bufi;
+ else
+ size = adc->rx_buf_sz + i - adc->bufi;
+
+ return size;
+ }
+
+ return 0;
+}
+
+static void stm32_adc_dma_buffer_done(void *data)
+{
+ struct iio_dev *indio_dev = data;
+
+ iio_trigger_poll_chained(indio_dev->trig);
+}
+
+static int stm32_adc_dma_start(struct iio_dev *indio_dev)
+{
+ struct stm32_adc *adc = iio_priv(indio_dev);
+ struct dma_async_tx_descriptor *desc;
+ dma_cookie_t cookie;
+ int ret;
+
+ if (!adc->dma_chan)
+ return 0;
+
+ dev_dbg(&indio_dev->dev, "%s size=%d watermark=%d\n", __func__,
+ adc->rx_buf_sz, adc->rx_buf_sz / 2);
+
+ /* Prepare a DMA cyclic transaction */
+ desc = dmaengine_prep_dma_cyclic(adc->dma_chan,
+ adc->rx_dma_buf,
+ adc->rx_buf_sz, adc->rx_buf_sz / 2,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ if (!desc)
+ return -EBUSY;
+
+ desc->callback = stm32_adc_dma_buffer_done;
+ desc->callback_param = indio_dev;
+
+ cookie = dmaengine_submit(desc);
+ ret = dma_submit_error(cookie);
+ if (ret) {
+ dmaengine_terminate_all(adc->dma_chan);
+ return ret;
+ }
+
+ /* Issue pending DMA requests */
+ dma_async_issue_pending(adc->dma_chan);
+
+ return 0;
+}
+
static int stm32_adc_buffer_postenable(struct iio_dev *indio_dev)
{
struct stm32_adc *adc = iio_priv(indio_dev);
return ret;
}
+ ret = stm32_adc_dma_start(indio_dev);
+ if (ret) {
+ dev_err(&indio_dev->dev, "Can't start dma\n");
+ goto err_clr_trig;
+ }
+
ret = iio_triggered_buffer_postenable(indio_dev);
if (ret < 0)
- goto err_clr_trig;
+ goto err_stop_dma;
/* Reset adc buffer index */
adc->bufi = 0;
- stm32_adc_conv_irq_enable(adc);
- stm32_adc_start_conv(adc);
+ if (!adc->dma_chan)
+ stm32_adc_conv_irq_enable(adc);
+
+ stm32_adc_start_conv(adc, !!adc->dma_chan);
return 0;
+err_stop_dma:
+ if (adc->dma_chan)
+ dmaengine_terminate_all(adc->dma_chan);
err_clr_trig:
stm32_adc_set_trig(indio_dev, NULL);
int ret;
stm32_adc_stop_conv(adc);
- stm32_adc_conv_irq_disable(adc);
+ if (!adc->dma_chan)
+ stm32_adc_conv_irq_disable(adc);
ret = iio_triggered_buffer_predisable(indio_dev);
if (ret < 0)
dev_err(&indio_dev->dev, "predisable failed\n");
+ if (adc->dma_chan)
+ dmaengine_terminate_all(adc->dma_chan);
+
if (stm32_adc_set_trig(indio_dev, NULL))
dev_err(&indio_dev->dev, "Can't clear trigger\n");
dev_dbg(&indio_dev->dev, "%s bufi=%d\n", __func__, adc->bufi);
- /* reset buffer index */
- adc->bufi = 0;
- iio_push_to_buffers_with_timestamp(indio_dev, adc->buffer,
- pf->timestamp);
+ if (!adc->dma_chan) {
+ /* reset buffer index */
+ adc->bufi = 0;
+ iio_push_to_buffers_with_timestamp(indio_dev, adc->buffer,
+ pf->timestamp);
+ } else {
+ int residue = stm32_adc_dma_residue(adc);
+
+ while (residue >= indio_dev->scan_bytes) {
+ u16 *buffer = (u16 *)&adc->rx_buf[adc->bufi];
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+ pf->timestamp);
+ residue -= indio_dev->scan_bytes;
+ adc->bufi += indio_dev->scan_bytes;
+ if (adc->bufi >= adc->rx_buf_sz)
+ adc->bufi = 0;
+ }
+ }
iio_trigger_notify_done(indio_dev->trig);
/* re-enable eoc irq */
- stm32_adc_conv_irq_enable(adc);
+ if (!adc->dma_chan)
+ stm32_adc_conv_irq_enable(adc);
return IRQ_HANDLED;
}
return 0;
}
+static int stm32_adc_dma_request(struct iio_dev *indio_dev)
+{
+ struct stm32_adc *adc = iio_priv(indio_dev);
+ struct dma_slave_config config;
+ int ret;
+
+ adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
+ if (!adc->dma_chan)
+ return 0;
+
+ adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev,
+ STM32_DMA_BUFFER_SIZE,
+ &adc->rx_dma_buf, GFP_KERNEL);
+ if (!adc->rx_buf) {
+ ret = -ENOMEM;
+ goto err_release;
+ }
+
+ /* Configure DMA channel to read data register */
+ memset(&config, 0, sizeof(config));
+ config.src_addr = (dma_addr_t)adc->common->phys_base;
+ config.src_addr += adc->offset + STM32F4_ADC_DR;
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+ ret = dmaengine_slave_config(adc->dma_chan, &config);
+ if (ret)
+ goto err_free;
+
+ return 0;
+
+err_free:
+ dma_free_coherent(adc->dma_chan->device->dev, STM32_DMA_BUFFER_SIZE,
+ adc->rx_buf, adc->rx_dma_buf);
+err_release:
+ dma_release_channel(adc->dma_chan);
+
+ return ret;
+}
+
static int stm32_adc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
if (ret < 0)
goto err_clk_disable;
+ ret = stm32_adc_dma_request(indio_dev);
+ if (ret < 0)
+ goto err_clk_disable;
+
ret = iio_triggered_buffer_setup(indio_dev,
&iio_pollfunc_store_time,
&stm32_adc_trigger_handler,
&stm32_adc_buffer_setup_ops);
if (ret) {
dev_err(&pdev->dev, "buffer setup failed\n");
- goto err_clk_disable;
+ goto err_dma_disable;
}
ret = iio_device_register(indio_dev);
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
+err_dma_disable:
+ if (adc->dma_chan) {
+ dma_free_coherent(adc->dma_chan->device->dev,
+ STM32_DMA_BUFFER_SIZE,
+ adc->rx_buf, adc->rx_dma_buf);
+ dma_release_channel(adc->dma_chan);
+ }
err_clk_disable:
clk_disable_unprepare(adc->clk);
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
+ if (adc->dma_chan) {
+ dma_free_coherent(adc->dma_chan->device->dev,
+ STM32_DMA_BUFFER_SIZE,
+ adc->rx_buf, adc->rx_dma_buf);
+ dma_release_channel(adc->dma_chan);
+ }
clk_disable_unprepare(adc->clk);
return 0;
projects / platform / kernel / linux-exynos.git / commitdiff