- Make emulated ROM BAR read-only by default (Pali Rohár)
- Make some emulated legacy PCI bits read-only for PCIe devices (Pali
Rohár)
- Update reserved bits in emulated PCIe Capability (Pali Rohár)
- Allow drivers to emulate different PCIe Capability versions (Pali Rohár)
- Set emulated Capabilities List bit for all PCIe devices, since they must
have at least a PCIe Capability (Pali Rohár)
* remotes/lorenzo/pci/bridge-emul:
PCI: pci-bridge-emul: Set PCI_STATUS_CAP_LIST for PCIe device
PCI: pci-bridge-emul: Correctly set PCIe capabilities
PCI: pci-bridge-emul: Fix definitions of reserved bits
PCI: pci-bridge-emul: Properly mark reserved PCIe bits in PCI config space
PCI: pci-bridge-emul: Make expansion ROM Base Address register read-only
return PCI_BRIDGE_EMUL_HANDLED;
}
- case PCI_CAP_LIST_ID:
case PCI_EXP_DEVCAP:
case PCI_EXP_DEVCTL:
+ case PCI_EXP_DEVCAP2:
+ case PCI_EXP_DEVCTL2:
+ case PCI_EXP_LNKCAP2:
+ case PCI_EXP_LNKCTL2:
*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
return PCI_BRIDGE_EMUL_HANDLED;
+
default:
return PCI_BRIDGE_EMUL_NOT_HANDLED;
}
* Initialize the configuration space of the PCI-to-PCI bridge
* associated with the given PCIe interface.
*/
-static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
+static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
{
struct pci_bridge_emul *bridge = &port->bridge;
+ u32 pcie_cap = mvebu_readl(port, PCIE_CAP_PCIEXP);
+ u8 pcie_cap_ver = ((pcie_cap >> 16) & PCI_EXP_FLAGS_VERS);
bridge->conf.vendor = PCI_VENDOR_ID_MARVELL;
bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;