imx8mn-var-som: fix non-applied PHY reset-gpios properties

Select DM_ETH_PHY so that the reset-gpios property of the ethphy node
can be used.

Also select DM_PCA953X, which is needed for resetting the
ethernet PHY on the carrier board via the PCA9534 I/O expander.

Commit 4e5114daf9eb ("imx8mn: synchronise device tree with linux") did
synchronise device tree with linux, which in effect removed obsolete
PHY reset properties and replaced them with new mdio DM
properties. But the commit didn't activate DM_ETH_PHY or DM_PCA953X.

Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux")

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>

diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 3450399..a940d8a 100644 (file)
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -247,6 +247,7 @@ config TARGET_IMX8MN_VAR_SOM
        select IMX8M_DDR4
        select MISC
        select I2C_EEPROM
+       select DM_ETH_PHY
 
 config TARGET_KONTRON_PITX_IMX8M
        bool "Support Kontron pITX-imx8m"

diff --git a/configs/imx8mn_var_som_defconfig b/configs/imx8mn_var_som_defconfig
index 9de7c91..e54c20e 100644 (file)
--- a/configs/imx8mn_var_som_defconfig
+++ b/configs/imx8mn_var_som_defconfig
@@ -77,6 +77,7 @@ CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_UUU_SUPPORT=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
 CONFIG_MXC_GPIO=y
+CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y