arm64: dts: ti: Add support for J7200 Common Processor Board

Add support for J7200 Common Processor Board.
The EVM architecture is very similar to J721E as follows:

+------------------------------------------------------+
|   +-------------------------------------------+      |
|   |                                           |      |
|   |        Add-on Card 1 Options              |      |
|   |                                           |      |
|   +-------------------------------------------+      |
|                                                      |
|                                                      |
|                     +-------------------+            |
|                     |                   |            |
|                     |   SOM             |            |
|  +--------------+   |                   |            |
|  |              |   |                   |            |
|  |  Add-on      |   +-------------------+            |
|  |  Card 2      |                                    |    Power Supply
|  |  Options     |                                    |    |
|  |              |                                    |    |
|  +--------------+                                    | <---
+------------------------------------------------------+
                                Common Processor Board

Common Processor board is the baseboard that has most of the actual
connectors, power supply etc. A SOM (System on Module) is plugged on
to the common processor board and this contains the SoC, PMIC, DDR and
basic high speed components necessary for functionality.

Note:
* The minimum configuration required to boot up the board is System On
  Module(SOM) + Common Processor Board.
* Since there is just a single SOM and Common Processor Board, we are
  maintaining common processor board as the base dts and SOM as the dtsi
  that we include. In the future as more SOM's appear, we should move
  common processor board as a dtsi and include configurations as dts.
* All daughter cards beyond the basic boards shall be maintained as
  overlays.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20200914162231.2535-6-lokeshvutla@ti.com

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 7f28be6..65506f2 100644 (file)
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -9,3 +9,5 @@
 dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
 
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
+
+dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
new file mode 100644 (file)
index 0000000..d257d23
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+
+/ {
+       chosen {
+               stdout-path = "serial2:115200n8";
+               bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+       };
+};
+
+&wkup_uart0 {
+       /* Wakeup UART is used by System firmware */
+       status = "disabled";
+};
+
+&main_uart0 {
+       /* Shared with ATF on this platform */
+       power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart2 {
+       /* MAIN UART 2 is used by R5F firmware */
+       status = "disabled";
+};
+
+&main_uart3 {
+       /* UART not brought out */
+       status = "disabled";
+};
+
+&main_uart4 {
+       /* UART not brought out */
+       status = "disabled";
+};
+
+&main_uart5 {
+       /* UART not brought out */
+       status = "disabled";
+};
+
+&main_uart6 {
+       /* UART not brought out */
+       status = "disabled";
+};
+
+&main_uart7 {
+       /* UART not brought out */
+       status = "disabled";
+};
+
+&main_uart8 {
+       /* UART not brought out */
+       status = "disabled";
+};
+
+&main_uart9 {
+       /* UART not brought out */
+       status = "disabled";
+};

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
new file mode 100644 (file)
index 0000000..f7e271c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200.dtsi"
+
+/ {
+       memory@80000000 {
+               device_type = "memory";
+               /* 4G RAM */
+               reg = <0x00 0x80000000 0x00 0x80000000>,
+                     <0x08 0x80000000 0x00 0x80000000>;
+       };
+
+       reserved_memory: reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               secure_ddr: optee@9e800000 {
+                       reg = <0x00 0x9e800000 0x00 0x01800000>;
+                       alignment = <0x1000>;
+                       no-map;
+               };
+       };
+};