[media] dib0700: Return -EINTR and unlock mutex if locking attempts fails
authorSantosh Nayak <santoshprasadnayak@gmail.com>
Mon, 19 Mar 2012 10:27:37 +0000 (07:27 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 15 May 2012 12:32:31 +0000 (09:32 -0300)
In 'dib0700_i2c_xfer_new()' and 'dib0700_i2c_xfer_legacy()'
we are taking two locks:
                1. i2c_mutex
                2. usb_mutex
If attempt to take 'usb_mutex' lock fails then the previously taken
lock 'i2c_mutex' should be unlocked and -EINTR should be returned so
that caller can take appropriate action.

If locking attempt was interrupted by a signal then
we should return -EINTR. At present we are returning '0' for
such scenarios  which is wrong.

Replace -EAGAIN by -EINTR as a return type for the the scenario
where locking attempt was interrupted by signal.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb/dvb-usb/dib0700_core.c

index 02290c6..7e9e00f 100644 (file)
@@ -32,7 +32,7 @@ int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
 
        if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
                err("could not acquire lock");
-               return 0;
+               return -EINTR;
        }
 
        ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
@@ -118,7 +118,7 @@ int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_
 
        if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
                err("could not acquire lock");
-               return 0;
+               return -EINTR;
        }
 
        st->buf[0] = REQUEST_SET_GPIO;
@@ -139,7 +139,7 @@ static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
        if (st->fw_version >= 0x10201) {
                if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
                        err("could not acquire lock");
-                       return 0;
+                       return -EINTR;
                }
 
                st->buf[0] = REQUEST_SET_USB_XFER_LEN;
@@ -178,7 +178,7 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
        /* Ensure nobody else hits the i2c bus while we're sending our
           sequence of messages, (such as the remote control thread) */
        if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-               return -EAGAIN;
+               return -EINTR;
 
        for (i = 0; i < num; i++) {
                if (i == 0) {
@@ -228,7 +228,8 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
                        /* Write request */
                        if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
                                err("could not acquire lock");
-                               return 0;
+                               mutex_unlock(&d->i2c_mutex);
+                               return -EINTR;
                        }
                        st->buf[0] = REQUEST_NEW_I2C_WRITE;
                        st->buf[1] = msg[i].addr << 1;
@@ -271,10 +272,11 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
        int i,len;
 
        if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-               return -EAGAIN;
+               return -EINTR;
        if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
                err("could not acquire lock");
-               return 0;
+               mutex_unlock(&d->i2c_mutex);
+               return -EINTR;
        }
 
        for (i = 0; i < num; i++) {
@@ -369,7 +371,7 @@ static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll,
 
        if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
                err("could not acquire lock");
-               return 0;
+               return -EINTR;
        }
 
        st->buf[0] = REQUEST_SET_CLOCK;
@@ -401,7 +403,7 @@ int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz)
 
        if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
                err("could not acquire lock");
-               return 0;
+               return -EINTR;
        }
 
        st->buf[0] = REQUEST_SET_I2C_PARAM;
@@ -561,7 +563,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 
        if (mutex_lock_interruptible(&adap->dev->usb_mutex) < 0) {
                err("could not acquire lock");
-               return 0;
+               return -EINTR;
        }
 
        st->buf[0] = REQUEST_ENABLE_VIDEO;
@@ -611,7 +613,7 @@ int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
 
        if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
                err("could not acquire lock");
-               return 0;
+               return -EINTR;
        }
 
        st->buf[0] = REQUEST_SET_RC;