ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt bindi...

As per mmc device tree binding documentation card detect gpio has
to be active low signal. When a hardware is designed with active
high card detect, gpio polarity has to be changed with
cd-inverted dt property.

In DRA74x, DRA72x and AM57xx EVMs the card detect gpio is
designed as active low gpio. So correcting the dt card detect
gpio definition.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index beee919..341ec88 100644 (file)
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -665,7 +665,7 @@
 
        vmmc-supply = <&ldo1_reg>;
        bus-width = <4>;
-       cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 };
 
 &mmc2 {

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 4e79649..864f600 100644 (file)
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -634,7 +634,7 @@
         * SDCD signal is not being used here - using the fact that GPIO mode
         * is always hardwired.
         */
-       cd-gpios = <&gpio6 27 0>;
+       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 };
 
 &mmc2 {

diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index cc67118..27e4142 100644 (file)
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -613,7 +613,7 @@
         * SDCD signal is not being used here - using the fact that GPIO mode
         * is a viable alternative
         */
-       cd-gpios = <&gpio6 27 0>;
+       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
        max-frequency = <192000000>;
 };