}
}
+# run_dump_test FILE
+# Copied from gas testsuite, tweaked and further extended.
+#
+# Assemble a .s file, then run some utility on it and check the output.
+#
+# There should be an assembly language file named FILE.s in the test
+# suite directory, and a pattern file called FILE.d. `run_dump_test'
+# will assemble FILE.s, run some tool like `objdump', `objcopy', or
+# `nm' on the .o file to produce textual output, and then analyze that
+# with regexps. The FILE.d file specifies what program to run, and
+# what to expect in its output.
+#
+# The FILE.d file begins with zero or more option lines, which specify
+# flags to pass to the assembler, the program to run to dump the
+# assembler's output, and the options it wants. The option lines have
+# the syntax:
+#
+# # OPTION: VALUE
+#
+# OPTION is the name of some option, like "name" or "objdump", and
+# VALUE is OPTION's value. The valid options are described below.
+# Whitespace is ignored everywhere, except within VALUE. The option
+# list ends with the first line that doesn't match the above syntax
+# (hmm, not great for error detection).
+#
+# The interesting options are:
+#
+# name: TEST-NAME
+# The name of this test, passed to DejaGNU's `pass' and `fail'
+# commands. If omitted, this defaults to FILE, the root of the
+# .s and .d files' names.
+#
+# as: FLAGS
+# When assembling, pass FLAGS to the assembler.
+# If assembling several files, you can pass different assembler
+# options in the "source" directives. See below.
+#
+# ld: FLAGS
+# Link assembled files using FLAGS, in the order of the "source"
+# directives, when using multiple files.
+#
+# PROG: PROGRAM-NAME
+# The name of the program to run to analyze the .o file produced
+# by the assembler or the linker output. This can be omitted;
+# run_dump_test will guess which program to run by seeing which of
+# the flags options below is present.
+#
+# objdump: FLAGS
+# nm: FLAGS
+# objcopy: FLAGS
+# Use the specified program to analyze the assembler or linker
+# output file, and pass it FLAGS, in addition to the output name.
+#
+# source: SOURCE [FLAGS]
+# Assemble the file SOURCE.s using the flags in the "as" directive
+# and the (optional) FLAGS. If omitted, the source defaults to
+# FILE.s.
+# This is useful if several .d files want to share a .s file.
+# More than one "source" directive can be given, which is useful
+# when testing linking.
+#
+# xfail: TARGET
+# The test is expected to fail on TARGET. This may occur more than
+# once.
+#
+# target: TARGET
+# Only run the test for TARGET. This may occur more than once; the
+# target being tested must match at least one.
+#
+# notarget: TARGET
+# Do not run the test for TARGET. This may occur more than once;
+# the target being tested must not match any of them.
+#
+# error: REGEX
+# An error with message matching REGEX must be emitted for the test
+# to pass. The PROG, objdump, nm and objcopy options have no
+# meaning and need not supplied if this is present.
+#
+# Each option may occur at most once unless otherwise mentioned.
+#
+# After the option lines come regexp lines. `run_dump_test' calls
+# `regexp_diff' to compare the output of the dumping tool against the
+# regexps in FILE.d. `regexp_diff' is defined later in this file; see
+# further comments there.
+
+proc run_dump_test { name } {
+ global subdir srcdir
+ global OBJDUMP NM AS OBJCOPY READELF LD
+ global OBJDUMPFLAGS NMFLAGS ASFLAGS OBJCOPYFLAGS READELFFLAGS LDFLAGS
+ global host_triplet runtests
+
+ if [string match "*/*" $name] {
+ set file $name
+ set name [file tail $name]
+ } else {
+ set file "$srcdir/$subdir/$name"
+ }
+
+ if ![runtest_file_p $runtests $name] then {
+ return
+ }
+
+ set opt_array [slurp_options "${file}.d"]
+ if { $opt_array == -1 } {
+ perror "error reading options from $file.d"
+ unresolved $subdir/$name
+ return
+ }
+ set dumpfile tmpdir/dump.out
+ set run_ld 0
+ set opts(as) {}
+ set opts(ld) {}
+ set opts(xfail) {}
+ set opts(target) {}
+ set opts(notarget) {}
+ set opts(objdump) {}
+ set opts(nm) {}
+ set opts(objcopy) {}
+ set opts(readelf) {}
+ set opts(name) {}
+ set opts(PROG) {}
+ set opts(source) {}
+ set opts(error) {}
+ set asflags{${file}.s} {}
+
+ foreach i $opt_array {
+ set opt_name [lindex $i 0]
+ set opt_val [lindex $i 1]
+ if ![info exists opts($opt_name)] {
+ perror "unknown option $opt_name in file $file.d"
+ unresolved $subdir/$name
+ return
+ }
+
+ switch -- $opt_name {
+ xfail {}
+ target {}
+ notarget {}
+ source {
+ # Move any source-specific as-flags to a separate array to
+ # simplify processing.
+ if { [llength $opt_val] > 1 } {
+ set asflags([lindex $opt_val 0]) [lrange $opt_val 1 end]
+ set opt_val [lindex $opt_val 0]
+ } else {
+ set asflags($opt_val) {}
+ }
+ }
+ default {
+ if [string length $opts($opt_name)] {
+ perror "option $opt_name multiply set in $file.d"
+ unresolved $subdir/$name
+ return
+ }
+
+ # A single "# ld:" with no options should do the right thing.
+ if { $opt_name == "ld" } {
+ set run_ld 1
+ }
+ }
+ }
+ set opts($opt_name) [concat $opts($opt_name) $opt_val]
+ }
+
+ # Decide early whether we should run the test for this target.
+ if { [llength $opts(target)] > 0 } {
+ set targmatch 0
+ foreach targ $opts(target) {
+ if [istarget $targ] {
+ set targmatch 1
+ break
+ }
+ }
+ if { $targmatch == 0 } {
+ return
+ }
+ }
+ foreach targ $opts(notarget) {
+ if [istarget $targ] {
+ return
+ }
+ }
+
+ if {$opts(PROG) != ""} {
+ switch -- $opts(PROG) {
+ objdump
+ { set program objdump }
+ nm
+ { set program nm }
+ objcopy
+ { set program objcopy }
+ readelf
+ { set program readelf }
+ default
+ { perror "unrecognized program option $opts(PROG) in $file.d"
+ unresolved $subdir/$name
+ return }
+ }
+ } elseif { $opts(error) != "" } {
+ # It's meaningless to require an output-testing method when we
+ # expect an error. For simplicity, we fake an arbitrary method.
+ set program "nm"
+ } else {
+ # Guess which program to run, by seeing which option was specified.
+ set program ""
+ foreach p {objdump objcopy nm readelf} {
+ if {$opts($p) != ""} {
+ if {$program != ""} {
+ perror "ambiguous dump program in $file.d"
+ unresolved $subdir/$name
+ return
+ } else {
+ set program $p
+ }
+ }
+ }
+ if {$program == ""} {
+ perror "dump program unspecified in $file.d"
+ unresolved $subdir/$name
+ return
+ }
+ }
+
+ set progopts1 $opts($program)
+ eval set progopts \$[string toupper $program]FLAGS
+ eval set binary \$[string toupper $program]
+ if { $opts(name) == "" } {
+ set testname "$subdir/$name"
+ } else {
+ set testname $opts(name)
+ }
+
+ if { $opts(source) == "" } {
+ set sourcefiles [list ${file}.s]
+ } else {
+ set sourcefiles {}
+ foreach sf $opts(source) {
+ lappend sourcefiles "$srcdir/$subdir/$sf"
+ # Must have asflags indexed on source name.
+ set asflags($srcdir/$subdir/$sf) $asflags($sf)
+ }
+ }
+
+ # Time to setup xfailures.
+ foreach targ $opts(xfail) {
+ setup_xfail $targ
+ }
+
+ # Assemble each file.
+ set objfiles {}
+ for { set i 0 } { $i < [llength $sourcefiles] } { incr i } {
+ set sourcefile [lindex $sourcefiles $i]
+
+ set objfile "tmpdir/dump$i.o"
+ lappend objfiles $objfile
+ set cmd "$AS $ASFLAGS $opts(as) $asflags($sourcefile) -o $objfile $sourcefile"
+
+ send_log "$cmd\n"
+ set cmdret [catch "exec $cmd" comp_output]
+ set comp_output [prune_warnings $comp_output]
+
+ # We accept errors at assembly stage too, unless we're supposed to
+ # link something.
+ if { $cmdret != 0 || ![string match "" $comp_output] } then {
+ send_log "$comp_output\n"
+ verbose "$comp_output" 3
+ if { $opts(error) != "" && $run_ld == 0 } {
+ if [regexp $opts(error) $comp_output] {
+ pass $testname
+ return
+ }
+ }
+ fail $testname
+ return
+ }
+ }
+
+ # Perhaps link the file(s).
+ if { $run_ld } {
+ set objfile "tmpdir/dump"
+ set cmd "$LD $LDFLAGS $opts(ld) -o $objfile $objfiles"
+
+ send_log "$cmd\n"
+ set cmdret [catch "exec $cmd" comp_output]
+ set comp_output [prune_warnings $comp_output]
+
+ if { $cmdret != 0 || ![string match "" $comp_output] } then {
+ verbose -log "failed with: <$comp_output>, expected: <$opts(error)>"
+ send_log "$comp_output\n"
+ verbose "$comp_output" 3
+ if { $opts(error) != "" } {
+ if [regexp $opts(error) $comp_output] {
+ pass $testname
+ return
+ }
+ }
+ fail $testname
+ return
+ }
+ } else {
+ set objfile "tmpdir/dump0.o"
+ }
+
+ # We must not have expected failure if we get here.
+ if { $opts(error) != "" } {
+ fail $testname
+ }
+
+ if { [which $binary] == 0 } {
+ untested $testname
+ return
+ }
+
+ if { $progopts1 == "" } { set $progopts1 "-r" }
+ verbose "running $binary $progopts $progopts1" 3
+
+ # Objcopy, unlike the other two, won't send its output to stdout,
+ # so we have to run it specially.
+ if { $program == "objcopy" } {
+ set cmd "$binary $progopts $progopts1 $objfile $dumpfile"
+ send_log "$cmd\n"
+ catch "exec $cmd" comp_output
+ set comp_output [prune_warnings $comp_output]
+ if ![string match "" $comp_output] then {
+ send_log "$comp_output\n"
+ fail $testname
+ return
+ }
+ } else {
+ set cmd "$binary $progopts $progopts1 $objfile > $dumpfile"
+ send_log "$cmd\n"
+ catch "exec $cmd" comp_output
+ set comp_output [prune_warnings $comp_output]
+ if ![string match "" $comp_output] then {
+ send_log "$comp_output\n"
+ fail $testname
+ return
+ }
+ }
+
+ verbose_eval {[file_contents $dumpfile]} 3
+ if { [regexp_diff $dumpfile "${file}.d"] } then {
+ fail $testname
+ verbose "output is [file_contents $dumpfile]" 2
+ return
+ }
+
+ pass $testname
+}
+
+proc slurp_options { file } {
+ if [catch { set f [open $file r] } x] {
+ #perror "couldn't open `$file': $x"
+ perror "$x"
+ return -1
+ }
+ set opt_array {}
+ # whitespace expression
+ set ws {[ ]*}
+ set nws {[^ ]*}
+ # whitespace is ignored anywhere except within the options list;
+ # option names are alphabetic only
+ set pat "^#${ws}(\[a-zA-Z\]*)$ws:${ws}(.*)$ws\$"
+ while { [gets $f line] != -1 } {
+ set line [string trim $line]
+ # Whitespace here is space-tab.
+ if [regexp $pat $line xxx opt_name opt_val] {
+ # match!
+ lappend opt_array [list $opt_name $opt_val]
+ } else {
+ break
+ }
+ }
+ close $f
+ return $opt_array
+}
+
+# regexp_diff, copied from gas, based on simple_diff above.
+# compares two files line-by-line
+# file1 contains strings, file2 contains regexps and #-comments
+# blank lines are ignored in either file
+# returns non-zero if differences exist
+#
+proc regexp_diff { file_1 file_2 } {
+
+ set eof -1
+ set end_1 0
+ set end_2 0
+ set differences 0
+ set diff_pass 0
+
+ if [file exists $file_1] then {
+ set file_a [open $file_1 r]
+ } else {
+ warning "$file_1 doesn't exist"
+ return 1
+ }
+
+ if [file exists $file_2] then {
+ set file_b [open $file_2 r]
+ } else {
+ fail "$file_2 doesn't exist"
+ close $file_a
+ return 1
+ }
+
+ verbose " Regexp-diff'ing: $file_1 $file_2" 2
+
+ while { 1 } {
+ set line_a ""
+ set line_b ""
+ while { [string length $line_a] == 0 } {
+ if { [gets $file_a line_a] == $eof } {
+ set end_1 1
+ break
+ }
+ }
+ while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
+ if [ string match "#pass" $line_b ] {
+ set end_2 1
+ set diff_pass 1
+ break
+ } elseif [ string match "#..." $line_b ] {
+ if { [gets $file_b line_b] == $eof } {
+ set end_2 1
+ break
+ }
+ verbose "looking for \"^$line_b$\"" 3
+ while { ![regexp "^$line_b$" "$line_a"] } {
+ verbose "skipping \"$line_a\"" 3
+ if { [gets $file_a line_a] == $eof } {
+ set end_1 1
+ break
+ }
+ }
+ break
+ }
+ if { [gets $file_b line_b] == $eof } {
+ set end_2 1
+ break
+ }
+ }
+
+ if { $diff_pass } {
+ break
+ } elseif { $end_1 && $end_2 } {
+ break
+ } elseif { $end_1 } {
+ send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
+ verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
+ set differences 1
+ break
+ } elseif { $end_2 } {
+ send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
+ verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
+ set differences 1
+ break
+ } else {
+ verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
+ if ![regexp "^$line_b$" "$line_a"] {
+ send_log "regexp_diff match failure\n"
+ send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
+ set differences 1
+ }
+ }
+ }
+
+ if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
+ send_log "$file_1 and $file_2 are different lengths\n"
+ verbose "$file_1 and $file_2 are different lengths" 3
+ set differences 1
+ }
+
+ close $file_a
+ close $file_b
+
+ return $differences
+}
+
+proc file_contents { filename } {
+ set file [open $filename r]
+ set contents [read $file]
+ close $file
+ return $contents
+}
+
+proc verbose_eval { expr { level 1 } } {
+ global verbose
+ if $verbose>$level then { eval verbose "$expr" $level }
+}
+
# This definition is taken from an unreleased version of DejaGnu. Once
# that version gets released, and has been out in the world for a few
# months at least, it may be safe to delete this copy.
projects / external / binutils.git / commitdiff