arm64: dts: qcom: clean up 'regulator-allowed-modes' indentation

When recently adding the missing 'regulator-allowed-modes' properties it
appears that the binding example with its four-spaces indentation
(corresponding to a single tab, which is still to little) was copied
verbatim.

Drop the unnecessary first line break after 'regulator-allowed-modes'
properties and indent the single remaining continuation line properly.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116102054.4673-3-johan+linaro@kernel.org

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 01ac460..952acfc 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -136,9 +136,8 @@
                        regulator-max-microvolt = <880000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7a_1p8: ldo7 {
@@ -154,9 +153,8 @@
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l11a_0p8: ldo11 {
@@ -263,9 +261,8 @@
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7c_1p8: ldo7 {
@@ -281,9 +278,8 @@
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l10c_3p3: ldo10 {

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index e9830e7..84cb6f3 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -90,9 +90,8 @@
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l4c: ldo4 {
@@ -108,9 +107,8 @@
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7c: ldo7 {
@@ -126,9 +124,8 @@
                        regulator-max-microvolt = <2504000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l17c: ldo17 {
@@ -137,9 +134,8 @@
                        regulator-max-microvolt = <2504000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
        };
 

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index f09810e..551768f 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -170,9 +170,8 @@
                        regulator-max-microvolt = <2504000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l13c: ldo13 {
@@ -195,9 +194,8 @@
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l4d: ldo4 {

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 20f3562..94f77d3 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -231,9 +231,8 @@
                        regulator-max-microvolt = <2950000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
 
                };
 
@@ -254,9 +253,8 @@
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
 
                };
 

diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 1cb1405..c456e95 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -282,9 +282,8 @@
                        regulator-max-microvolt = <2950000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                               <RPMH_REGULATOR_MODE_LPM
-                                RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7e: ldo7 {
@@ -304,9 +303,8 @@
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                               <RPMH_REGULATOR_MODE_LPM
-                                RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l10e: ldo10 {

diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index fb6e5a1..c958a8b 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -348,9 +348,8 @@
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7c_3p0: ldo7 {
@@ -370,9 +369,8 @@
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l10c_3p3: ldo10 {

diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index 2a223ed..38746f2 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -317,9 +317,8 @@
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7c_2p85: ldo7 {
@@ -342,9 +341,8 @@
                        regulator-max-microvolt = <2960000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l10c_3p3: ldo10 {

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 69ae650..26a6081 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -107,9 +107,8 @@
                        regulator-max-microvolt = <888000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l6b_1p2: ldo6 {
@@ -118,9 +117,8 @@
                        regulator-max-microvolt = <1208000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l7b_2p96: ldo7 {
@@ -129,9 +127,8 @@
                        regulator-max-microvolt = <2504000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
 
                vreg_l9b_1p2: ldo9 {
@@ -140,9 +137,8 @@
                        regulator-max-microvolt = <1200000>;
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                        regulator-allow-set-load;
-                       regulator-allowed-modes =
-                           <RPMH_REGULATOR_MODE_LPM
-                            RPMH_REGULATOR_MODE_HPM>;
+                       regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                                  RPMH_REGULATOR_MODE_HPM>;
                };
        };