qlge: convert to net_device_ops

Convert driver to new net_device_ops. Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 3a6d3ac..713b793 100644 (file)
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3715,6 +3715,22 @@ err_out:
        return err;
 }
 
+
+static const struct net_device_ops qlge_netdev_ops = {
+       .ndo_open               = qlge_open,
+       .ndo_stop               = qlge_close,
+       .ndo_start_xmit         = qlge_send,
+       .ndo_change_mtu         = qlge_change_mtu,
+       .ndo_get_stats          = qlge_get_stats,
+       .ndo_set_multicast_list = qlge_set_multicast_list,
+       .ndo_set_mac_address    = qlge_set_mac_address,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_tx_timeout         = qlge_tx_timeout,
+       .ndo_vlan_rx_register   = ql_vlan_rx_register,
+       .ndo_vlan_rx_add_vid    = ql_vlan_rx_add_vid,
+       .ndo_vlan_rx_kill_vid   = ql_vlan_rx_kill_vid,
+};
+
 static int __devinit qlge_probe(struct pci_dev *pdev,
                                const struct pci_device_id *pci_entry)
 {
@@ -3752,19 +3768,11 @@ static int __devinit qlge_probe(struct pci_dev *pdev,
         */
        ndev->tx_queue_len = qdev->tx_ring_size;
        ndev->irq = pdev->irq;
-       ndev->open = qlge_open;
-       ndev->stop = qlge_close;
-       ndev->hard_start_xmit = qlge_send;
+
+       ndev->netdev_ops = &qlge_netdev_ops;
        SET_ETHTOOL_OPS(ndev, &qlge_ethtool_ops);
-       ndev->change_mtu = qlge_change_mtu;
-       ndev->get_stats = qlge_get_stats;
-       ndev->set_multicast_list = qlge_set_multicast_list;
-       ndev->set_mac_address = qlge_set_mac_address;
-       ndev->tx_timeout = qlge_tx_timeout;
        ndev->watchdog_timeo = 10 * HZ;
-       ndev->vlan_rx_register = ql_vlan_rx_register;
-       ndev->vlan_rx_add_vid = ql_vlan_rx_add_vid;
-       ndev->vlan_rx_kill_vid = ql_vlan_rx_kill_vid;
+
        err = register_netdev(ndev);
        if (err) {
                dev_err(&pdev->dev, "net device registration failed.\n");