drm/i915/display: Do both crawl and squash when changing cdclk
authorVille Syrjälä <ville.syrjala@linux.intel.com>
Thu, 17 Nov 2022 23:00:01 +0000 (15:00 -0800)
committerAnusha Srivatsa <anusha.srivatsa@intel.com>
Mon, 21 Nov 2022 23:19:28 +0000 (15:19 -0800)
For MTL, changing cdclk from between certain frequencies has
both squash and crawl. Use the current cdclk config and
the new(desired) cdclk config to construct a mid cdclk config.
Set the cdclk twice:
- Current cdclk -> mid cdclk
- mid cdclk -> desired cdclk

Driver should not take some Pcode mailbox communication
in the cdclk path for platforms that are Display version 14 and later.

v2: Add check in intel_modeset_calc_cdclk() to avoid cdclk
change via modeset for platforms that support squash_crawl sequences(Ville)

v3: Add checks for:
- scenario where only slow clock is used and
cdclk is actually 0 (bringing up display).
- PLLs are on before looking up the waveform.
- Squash and crawl capability checks.(Ville)

v4: Rebase
- Move checks to be more consistent (Ville)
- Add comments (Bala)
v5:
- Further small changes. Move checks around.
- Make if-else better looking (Ville)

v6: MTl should not follow PUnit mailbox communication as the rest of
gen11+ platforms.(Anusha)

Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117230002.792096-2-anusha.srivatsa@intel.com
drivers/gpu/drm/i915/display/intel_cdclk.c

index 25d0127..519c1df 100644 (file)
@@ -1727,37 +1727,79 @@ static bool cdclk_pll_is_unknown(unsigned int vco)
        return vco == ~0;
 }
 
-static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
-                         const struct intel_cdclk_config *cdclk_config,
-                         enum pipe pipe)
+static int cdclk_squash_divider(u16 waveform)
+{
+       return hweight16(waveform ?: 0xffff);
+}
+
+static bool cdclk_compute_crawl_and_squash_midpoint(struct drm_i915_private *i915,
+                                                   const struct intel_cdclk_config *old_cdclk_config,
+                                                   const struct intel_cdclk_config *new_cdclk_config,
+                                                   struct intel_cdclk_config *mid_cdclk_config)
+{
+       u16 old_waveform, new_waveform, mid_waveform;
+       int size = 16;
+       int div = 2;
+
+       /* Return if PLL is in an unknown state, force a complete disable and re-enable. */
+       if (cdclk_pll_is_unknown(old_cdclk_config->vco))
+               return false;
+
+       /* Return if both Squash and Crawl are not present */
+       if (!HAS_CDCLK_CRAWL(i915) || !HAS_CDCLK_SQUASH(i915))
+               return false;
+
+       old_waveform = cdclk_squash_waveform(i915, old_cdclk_config->cdclk);
+       new_waveform = cdclk_squash_waveform(i915, new_cdclk_config->cdclk);
+
+       /* Return if Squash only or Crawl only is the desired action */
+       if (old_cdclk_config->vco == 0 || new_cdclk_config->vco == 0 ||
+           old_cdclk_config->vco == new_cdclk_config->vco ||
+           old_waveform == new_waveform)
+               return false;
+
+       *mid_cdclk_config = *new_cdclk_config;
+
+       /*
+        * Populate the mid_cdclk_config accordingly.
+        * - If moving to a higher cdclk, the desired action is squashing.
+        * The mid cdclk config should have the new (squash) waveform.
+        * - If moving to a lower cdclk, the desired action is crawling.
+        * The mid cdclk config should have the new vco.
+        */
+
+       if (cdclk_squash_divider(new_waveform) > cdclk_squash_divider(old_waveform)) {
+               mid_cdclk_config->vco = old_cdclk_config->vco;
+               mid_waveform = new_waveform;
+       } else {
+               mid_cdclk_config->vco = new_cdclk_config->vco;
+               mid_waveform = old_waveform;
+       }
+
+       mid_cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_squash_divider(mid_waveform) *
+                                                   mid_cdclk_config->vco, size * div);
+
+       /* make sure the mid clock came out sane */
+
+       drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk <
+                   min(old_cdclk_config->cdclk, new_cdclk_config->cdclk));
+       drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk >
+                   i915->display.cdclk.max_cdclk_freq);
+       drm_WARN_ON(&i915->drm, cdclk_squash_waveform(i915, mid_cdclk_config->cdclk) !=
+                   mid_waveform);
+
+       return true;
+}
+
+static void _bxt_set_cdclk(struct drm_i915_private *dev_priv,
+                          const struct intel_cdclk_config *cdclk_config,
+                          enum pipe pipe)
 {
        int cdclk = cdclk_config->cdclk;
        int vco = cdclk_config->vco;
        u32 val;
        u16 waveform;
        int clock;
-       int ret;
-
-       /* Inform power controller of upcoming frequency change. */
-       if (DISPLAY_VER(dev_priv) >= 11)
-               ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
-                                       SKL_CDCLK_PREPARE_FOR_CHANGE,
-                                       SKL_CDCLK_READY_FOR_CHANGE,
-                                       SKL_CDCLK_READY_FOR_CHANGE, 3);
-       else
-               /*
-                * BSpec requires us to wait up to 150usec, but that leads to
-                * timeouts; the 2ms used here is based on experiment.
-                */
-               ret = snb_pcode_write_timeout(&dev_priv->uncore,
-                                             HSW_PCODE_DE_WRITE_FREQ_REQ,
-                                             0x80000000, 150, 2);
-       if (ret) {
-               drm_err(&dev_priv->drm,
-                       "Failed to inform PCU about cdclk change (err %d, freq %d)\n",
-                       ret, cdclk);
-               return;
-       }
 
        if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->display.cdclk.hw.vco > 0 && vco > 0 &&
            !cdclk_pll_is_unknown(dev_priv->display.cdclk.hw.vco)) {
@@ -1793,11 +1835,62 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 
        if (pipe != INVALID_PIPE)
                intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe));
+}
+
+static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
+                         const struct intel_cdclk_config *cdclk_config,
+                         enum pipe pipe)
+{
+       struct intel_cdclk_config mid_cdclk_config;
+       int cdclk = cdclk_config->cdclk;
+       int ret = 0;
+
+       /*
+        * Inform power controller of upcoming frequency change.
+        * Display versions 14 and beyond do not follow the PUnit
+        * mailbox communication, skip
+        * this step.
+        */
+       if (DISPLAY_VER(dev_priv) >= 14)
+               /* NOOP */;
+       else if (DISPLAY_VER(dev_priv) >= 11)
+               ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
+                                       SKL_CDCLK_PREPARE_FOR_CHANGE,
+                                       SKL_CDCLK_READY_FOR_CHANGE,
+                                       SKL_CDCLK_READY_FOR_CHANGE, 3);
+       else
+               /*
+                * BSpec requires us to wait up to 150usec, but that leads to
+                * timeouts; the 2ms used here is based on experiment.
+                */
+               ret = snb_pcode_write_timeout(&dev_priv->uncore,
+                                             HSW_PCODE_DE_WRITE_FREQ_REQ,
+                                             0x80000000, 150, 2);
+
+       if (ret) {
+               drm_err(&dev_priv->drm,
+                       "Failed to inform PCU about cdclk change (err %d, freq %d)\n",
+                       ret, cdclk);
+               return;
+       }
 
-       if (DISPLAY_VER(dev_priv) >= 11) {
+       if (cdclk_compute_crawl_and_squash_midpoint(dev_priv, &dev_priv->display.cdclk.hw,
+                                                   cdclk_config, &mid_cdclk_config)) {
+               _bxt_set_cdclk(dev_priv, &mid_cdclk_config, pipe);
+               _bxt_set_cdclk(dev_priv, cdclk_config, pipe);
+       } else {
+               _bxt_set_cdclk(dev_priv, cdclk_config, pipe);
+       }
+
+       if (DISPLAY_VER(dev_priv) >= 14)
+               /*
+                * NOOP - No Pcode communication needed for
+                * Display versions 14 and beyond
+                */;
+       else if (DISPLAY_VER(dev_priv) >= 11)
                ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
                                      cdclk_config->voltage_level);
-       } else {
+       else
                /*
                 * The timeout isn't specified, the 2ms used here is based on
                 * experiment.
@@ -1808,7 +1901,6 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
                                              HSW_PCODE_DE_WRITE_FREQ_REQ,
                                              cdclk_config->voltage_level,
                                              150, 2);
-       }
 
        if (ret) {
                drm_err(&dev_priv->drm,
@@ -1965,6 +2057,28 @@ void intel_cdclk_uninit_hw(struct drm_i915_private *i915)
                skl_cdclk_uninit_hw(i915);
 }
 
+static bool intel_cdclk_can_crawl_and_squash(struct drm_i915_private *i915,
+                                            const struct intel_cdclk_config *a,
+                                            const struct intel_cdclk_config *b)
+{
+       u16 old_waveform;
+       u16 new_waveform;
+
+       drm_WARN_ON(&i915->drm, cdclk_pll_is_unknown(a->vco));
+
+       if (a->vco == 0 || b->vco == 0)
+               return false;
+
+       if (!HAS_CDCLK_CRAWL(i915) || !HAS_CDCLK_SQUASH(i915))
+               return false;
+
+       old_waveform = cdclk_squash_waveform(i915, a->cdclk);
+       new_waveform = cdclk_squash_waveform(i915, b->cdclk);
+
+       return a->vco != b->vco &&
+              old_waveform != new_waveform;
+}
+
 static bool intel_cdclk_can_crawl(struct drm_i915_private *dev_priv,
                                  const struct intel_cdclk_config *a,
                                  const struct intel_cdclk_config *b)
@@ -2771,9 +2885,14 @@ int intel_modeset_calc_cdclk(struct intel_atomic_state *state)
                        pipe = INVALID_PIPE;
        }
 
-       if (intel_cdclk_can_squash(dev_priv,
-                                  &old_cdclk_state->actual,
-                                  &new_cdclk_state->actual)) {
+       if (intel_cdclk_can_crawl_and_squash(dev_priv,
+                                            &old_cdclk_state->actual,
+                                            &new_cdclk_state->actual)) {
+               drm_dbg_kms(&dev_priv->drm,
+                           "Can change cdclk via crawling and squashing\n");
+       } else if (intel_cdclk_can_squash(dev_priv,
+                                       &old_cdclk_state->actual,
+                                       &new_cdclk_state->actual)) {
                drm_dbg_kms(&dev_priv->drm,
                            "Can change cdclk via squashing\n");
        } else if (intel_cdclk_can_crawl(dev_priv,