#include <asm/intel_scu_ipc.h>
/* Number of thermal sensors */
-#define MSIC_THERMAL_SENSORS 4
+#define MSIC_THERMAL_SENSORS 4
/* ADC1 - thermal registers */
-#define MSIC_THERM_ADC1CNTL1 0x1C0
-#define MSIC_ADC_ENBL 0x10
-#define MSIC_ADC_START 0x08
+#define MSIC_THERM_ADC1CNTL1 0x1C0
+#define MSIC_ADC_ENBL 0x10
+#define MSIC_ADC_START 0x08
-#define MSIC_THERM_ADC1CNTL3 0x1C2
-#define MSIC_ADCTHERM_ENBL 0x04
-#define MSIC_ADCRRDATA_ENBL 0x05
-#define MSIC_CHANL_MASK_VAL 0x0F
+#define MSIC_THERM_ADC1CNTL3 0x1C2
+#define MSIC_ADCTHERM_ENBL 0x04
+#define MSIC_ADCRRDATA_ENBL 0x05
+#define MSIC_CHANL_MASK_VAL 0x0F
-#define MSIC_STOPBIT_MASK 16
-#define MSIC_ADCTHERM_MASK 4
-#define ADC_CHANLS_MAX 15 /* Number of ADC channels */
-#define ADC_LOOP_MAX (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS)
+#define MSIC_STOPBIT_MASK 16
+#define MSIC_ADCTHERM_MASK 4
+/* Number of ADC channels */
+#define ADC_CHANLS_MAX 15
+#define ADC_LOOP_MAX (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS)
/* ADC channel code values */
-#define SKIN_SENSOR0_CODE 0x08
-#define SKIN_SENSOR1_CODE 0x09
-#define SYS_SENSOR_CODE 0x0A
-#define MSIC_DIE_SENSOR_CODE 0x03
+#define SKIN_SENSOR0_CODE 0x08
+#define SKIN_SENSOR1_CODE 0x09
+#define SYS_SENSOR_CODE 0x0A
+#define MSIC_DIE_SENSOR_CODE 0x03
-#define SKIN_THERM_SENSOR0 0
-#define SKIN_THERM_SENSOR1 1
-#define SYS_THERM_SENSOR2 2
-#define MSIC_DIE_THERM_SENSOR3 3
+#define SKIN_THERM_SENSOR0 0
+#define SKIN_THERM_SENSOR1 1
+#define SYS_THERM_SENSOR2 2
+#define MSIC_DIE_THERM_SENSOR3 3
/* ADC code range */
-#define ADC_MAX 977
-#define ADC_MIN 162
-#define ADC_VAL0C 887
-#define ADC_VAL20C 720
-#define ADC_VAL40C 508
-#define ADC_VAL60C 315
+#define ADC_MAX 977
+#define ADC_MIN 162
+#define ADC_VAL0C 887
+#define ADC_VAL20C 720
+#define ADC_VAL40C 508
+#define ADC_VAL60C 315
/* ADC base addresses */
-#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */
-#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */
+#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */
+#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */
/* MSIC die attributes */
-#define MSIC_DIE_ADC_MIN 488
-#define MSIC_DIE_ADC_MAX 1004
+#define MSIC_DIE_ADC_MIN 488
+#define MSIC_DIE_ADC_MAX 1004
/* This holds the address of the first free ADC channel,
* among the 15 channels
static int channel_index;
struct platform_info {
- struct platform_device *pdev;
- struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS];
+ struct platform_device *pdev;
+ struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS];
};
struct thermal_device_info {
- unsigned int chnl_addr;
- int direct;
- /* This holds the current temperature in millidegree celsius */
- long curr_temp;
+ unsigned int chnl_addr;
+ int direct;
+ /* This holds the current temperature in millidegree celsius */
+ long curr_temp;
};
/**
*/
static int to_msic_die_temp(uint16_t adc_val)
{
- return (368 * (adc_val) / 1000) - 220;
+ return (368 * (adc_val) / 1000) - 220;
}
/**
*/
static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max)
{
- return (adc_val >= min) && (adc_val <= max);
+ return (adc_val >= min) && (adc_val <= max);
}
/**
*/
static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp)
{
- int temp;
-
- /* Direct conversion for die temperature */
- if (direct) {
- if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) {
- *tp = to_msic_die_temp(adc_val) * 1000;
- return 0;
- }
- return -ERANGE;
- }
-
- if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX))
- return -ERANGE;
-
- /* Linear approximation for skin temperature */
- if (adc_val > ADC_VAL0C)
- temp = 177 - (adc_val/5);
- else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C))
- temp = 111 - (adc_val/8);
- else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C))
- temp = 92 - (adc_val/10);
- else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C))
- temp = 91 - (adc_val/10);
- else
- temp = 112 - (adc_val/6);
-
- /* Convert temperature in celsius to milli degree celsius */
- *tp = temp * 1000;
- return 0;
+ int temp;
+
+ /* Direct conversion for die temperature */
+ if (direct) {
+ if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) {
+ *tp = to_msic_die_temp(adc_val) * 1000;
+ return 0;
+ }
+ return -ERANGE;
+ }
+
+ if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX))
+ return -ERANGE;
+
+ /* Linear approximation for skin temperature */
+ if (adc_val > ADC_VAL0C)
+ temp = 177 - (adc_val/5);
+ else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C))
+ temp = 111 - (adc_val/8);
+ else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C))
+ temp = 92 - (adc_val/10);
+ else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C))
+ temp = 91 - (adc_val/10);
+ else
+ temp = 112 - (adc_val/6);
+
+ /* Convert temperature in celsius to milli degree celsius */
+ *tp = temp * 1000;
+ return 0;
}
/**
*/
static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
{
- struct thermal_device_info *td_info = tzd->devdata;
- uint16_t adc_val, addr;
- uint8_t data = 0;
- int ret;
- unsigned long curr_temp;
-
-
- addr = td_info->chnl_addr;
-
- /* Enable the msic for conversion before reading */
- ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
- if (ret)
- return ret;
-
- /* Re-toggle the RRDATARD bit (temporary workaround) */
- ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
- if (ret)
- return ret;
-
- /* Read the higher bits of data */
- ret = intel_scu_ipc_ioread8(addr, &data);
- if (ret)
- return ret;
-
- /* Shift bits to accommodate the lower two data bits */
- adc_val = (data << 2);
- addr++;
-
- ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */
- if (ret)
- return ret;
-
- /* Adding lower two bits to the higher bits */
- data &= 03;
- adc_val += data;
-
- /* Convert ADC value to temperature */
- ret = adc_to_temp(td_info->direct, adc_val, &curr_temp);
- if (ret == 0)
- *temp = td_info->curr_temp = curr_temp;
- return ret;
+ struct thermal_device_info *td_info = tzd->devdata;
+ uint16_t adc_val, addr;
+ uint8_t data = 0;
+ int ret;
+ unsigned long curr_temp;
+
+
+ addr = td_info->chnl_addr;
+
+ /* Enable the msic for conversion before reading */
+ ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
+ if (ret)
+ return ret;
+
+ /* Re-toggle the RRDATARD bit (temporary workaround) */
+ ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
+ if (ret)
+ return ret;
+
+ /* Read the higher bits of data */
+ ret = intel_scu_ipc_ioread8(addr, &data);
+ if (ret)
+ return ret;
+
+ /* Shift bits to accommodate the lower two data bits */
+ adc_val = (data << 2);
+ addr++;
+
+ ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */
+ if (ret)
+ return ret;
+
+ /* Adding lower two bits to the higher bits */
+ data &= 03;
+ adc_val += data;
+
+ /* Convert ADC value to temperature */
+ ret = adc_to_temp(td_info->direct, adc_val, &curr_temp);
+ if (ret == 0)
+ *temp = td_info->curr_temp = curr_temp;
+ return ret;
}
/**
*/
static int configure_adc(int val)
{
- int ret;
- uint8_t data;
-
- ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
- if (ret)
- return ret;
-
- if (val) {
- /* Enable and start the ADC */
- data |= (MSIC_ADC_ENBL | MSIC_ADC_START);
- } else {
- /* Just stop the ADC */
- data &= (~MSIC_ADC_START);
- }
-
- return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data);
+ int ret;
+ uint8_t data;
+
+ ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
+ if (ret)
+ return ret;
+
+ if (val) {
+ /* Enable and start the ADC */
+ data |= (MSIC_ADC_ENBL | MSIC_ADC_START);
+ } else {
+ /* Just stop the ADC */
+ data &= (~MSIC_ADC_START);
+ }
+ return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data);
}
/**
*/
static int set_up_therm_channel(u16 base_addr)
{
- int ret;
-
- /* Enable all the sensor channels */
- ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE);
- if (ret)
- return ret;
-
- ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE);
- if (ret)
- return ret;
-
- ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE);
- if (ret)
- return ret;
-
- /* Since this is the last channel, set the stop bit
- to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
- ret = intel_scu_ipc_iowrite8(base_addr + 3,
- (MSIC_DIE_SENSOR_CODE | 0x10));
- if (ret)
- return ret;
-
- /* Enable ADC and start it */
- return configure_adc(1);
+ int ret;
+
+ /* Enable all the sensor channels */
+ ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE);
+ if (ret)
+ return ret;
+
+ ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE);
+ if (ret)
+ return ret;
+
+ ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE);
+ if (ret)
+ return ret;
+
+ /* Since this is the last channel, set the stop bit
+ * to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
+ ret = intel_scu_ipc_iowrite8(base_addr + 3,
+ (MSIC_DIE_SENSOR_CODE | 0x10));
+ if (ret)
+ return ret;
+
+ /* Enable ADC and start it */
+ return configure_adc(1);
}
/**
*/
static int reset_stopbit(uint16_t addr)
{
- int ret;
- uint8_t data;
- ret = intel_scu_ipc_ioread8(addr, &data);
- if (ret)
- return ret;
- /* Set the stop bit to zero */
- return intel_scu_ipc_iowrite8(addr, (data & 0xEF));
+ int ret;
+ uint8_t data;
+ ret = intel_scu_ipc_ioread8(addr, &data);
+ if (ret)
+ return ret;
+ /* Set the stop bit to zero */
+ return intel_scu_ipc_iowrite8(addr, (data & 0xEF));
}
/**
*/
static int find_free_channel(void)
{
- int ret;
- int i;
- uint8_t data;
-
- /* check whether ADC is enabled */
- ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
- if (ret)
- return ret;
-
- if ((data & MSIC_ADC_ENBL) == 0)
- return 0;
-
- /* ADC is already enabled; Looking for an empty channel */
- for (i = 0; i < ADC_CHANLS_MAX; i++) {
- ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data);
- if (ret)
- return ret;
-
- if (data & MSIC_STOPBIT_MASK) {
- ret = i;
- break;
- }
- }
- return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret;
+ int ret;
+ int i;
+ uint8_t data;
+
+ /* check whether ADC is enabled */
+ ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
+ if (ret)
+ return ret;
+
+ if ((data & MSIC_ADC_ENBL) == 0)
+ return 0;
+
+ /* ADC is already enabled; Looking for an empty channel */
+ for (i = 0; i < ADC_CHANLS_MAX; i++) {
+ ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data);
+ if (ret)
+ return ret;
+
+ if (data & MSIC_STOPBIT_MASK) {
+ ret = i;
+ break;
+ }
+ }
+ return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret;
}
/**
*/
static int mid_initialize_adc(struct device *dev)
{
- u8 data;
- u16 base_addr;
- int ret;
-
- /*
- * Ensure that adctherm is disabled before we
- * initialize the ADC
- */
- ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data);
- if (ret)
- return ret;
-
- if (data & MSIC_ADCTHERM_MASK)
- dev_warn(dev, "ADCTHERM already set");
-
- /* Index of the first channel in which the stop bit is set */
- channel_index = find_free_channel();
- if (channel_index < 0) {
- dev_err(dev, "No free ADC channels");
- return channel_index;
- }
-
- base_addr = ADC_CHNL_START_ADDR + channel_index;
-
- if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) {
- /* Reset stop bit for channels other than 0 and 12 */
- ret = reset_stopbit(base_addr);
- if (ret)
- return ret;
-
- /* Index of the first free channel */
- base_addr++;
- channel_index++;
- }
-
- ret = set_up_therm_channel(base_addr);
- if (ret) {
- dev_err(dev, "unable to enable ADC");
- return ret;
- }
- dev_dbg(dev, "ADC initialization successful");
- return ret;
+ u8 data;
+ u16 base_addr;
+ int ret;
+
+ /*
+ * Ensure that adctherm is disabled before we
+ * initialize the ADC
+ */
+ ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data);
+ if (ret)
+ return ret;
+
+ if (data & MSIC_ADCTHERM_MASK)
+ dev_warn(dev, "ADCTHERM already set");
+
+ /* Index of the first channel in which the stop bit is set */
+ channel_index = find_free_channel();
+ if (channel_index < 0) {
+ dev_err(dev, "No free ADC channels");
+ return channel_index;
+ }
+
+ base_addr = ADC_CHNL_START_ADDR + channel_index;
+
+ if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) {
+ /* Reset stop bit for channels other than 0 and 12 */
+ ret = reset_stopbit(base_addr);
+ if (ret)
+ return ret;
+
+ /* Index of the first free channel */
+ base_addr++;
+ channel_index++;
+ }
+
+ ret = set_up_therm_channel(base_addr);
+ if (ret) {
+ dev_err(dev, "unable to enable ADC");
+ return ret;
+ }
+ dev_dbg(dev, "ADC initialization successful");
+ return ret;
}
/**
*/
static struct thermal_device_info *initialize_sensor(int index)
{
- struct thermal_device_info *td_info =
- kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL);
-
- if (!td_info)
- return NULL;
-
- /* Set the base addr of the channel for this sensor */
- td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index);
- /* Sensor 3 is direct conversion */
- if (index == 3)
- td_info->direct = 1;
- return td_info;
+ struct thermal_device_info *td_info =
+ kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL);
+
+ if (!td_info)
+ return NULL;
+
+ /* Set the base addr of the channel for this sensor */
+ td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index);
+ /* Sensor 3 is direct conversion */
+ if (index == 3)
+ td_info->direct = 1;
+ return td_info;
}
/**
*/
static int mid_thermal_resume(struct platform_device *pdev)
{
- return mid_initialize_adc(&pdev->dev);
+ return mid_initialize_adc(&pdev->dev);
}
/**
*/
static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- /*
- * This just stops the ADC and does not disable it.
- * temporary workaround until we have a generic ADC driver.
- * If 0 is passed, it disables the ADC.
- */
- return configure_adc(0);
+ /*
+ * This just stops the ADC and does not disable it.
+ * temporary workaround until we have a generic ADC driver.
+ * If 0 is passed, it disables the ADC.
+ */
+ return configure_adc(0);
}
/**
*/
static int read_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp)
{
- WARN_ON(tzd == NULL);
- return mid_read_temp(tzd, temp);
+ WARN_ON(tzd == NULL);
+ return mid_read_temp(tzd, temp);
}
/* Can't be const */
static struct thermal_zone_device_ops tzd_ops = {
- .get_temp = read_curr_temp,
+ .get_temp = read_curr_temp,
};
-
/**
* mid_thermal_probe - mfld thermal initialize
* @pdev: platform device structure
*/
static int mid_thermal_probe(struct platform_device *pdev)
{
- static char *name[MSIC_THERMAL_SENSORS] = {
- "skin0", "skin1", "sys", "msicdie"
- };
-
- int ret;
- int i;
- struct platform_info *pinfo;
-
- pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL);
- if (!pinfo)
- return -ENOMEM;
-
- /* Initializing the hardware */
- ret = mid_initialize_adc(&pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "ADC init failed");
- kfree(pinfo);
- return ret;
- }
-
- /* Register each sensor with the generic thermal framework*/
- for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
- pinfo->tzd[i] = thermal_zone_device_register(name[i],
- 0, initialize_sensor(i),
- &tzd_ops, 0, 0, 0, 0);
- if (IS_ERR(pinfo->tzd[i]))
- goto reg_fail;
- }
-
- pinfo->pdev = pdev;
- platform_set_drvdata(pdev, pinfo);
- return 0;
+ static char *name[MSIC_THERMAL_SENSORS] = {
+ "skin0", "skin1", "sys", "msicdie"
+ };
+
+ int ret;
+ int i;
+ struct platform_info *pinfo;
+
+ pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL);
+ if (!pinfo)
+ return -ENOMEM;
+
+ /* Initializing the hardware */
+ ret = mid_initialize_adc(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "ADC init failed");
+ kfree(pinfo);
+ return ret;
+ }
+
+ /* Register each sensor with the generic thermal framework*/
+ for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
+ pinfo->tzd[i] = thermal_zone_device_register(name[i],
+ 0, initialize_sensor(i), &tzd_ops, 0, 0, 0, 0);
+ if (IS_ERR(pinfo->tzd[i]))
+ goto reg_fail;
+ }
+
+ pinfo->pdev = pdev;
+ platform_set_drvdata(pdev, pinfo);
+ return 0;
reg_fail:
- ret = PTR_ERR(pinfo->tzd[i]);
- while (--i >= 0)
- thermal_zone_device_unregister(pinfo->tzd[i]);
- configure_adc(0);
- kfree(pinfo);
- return ret;
+ ret = PTR_ERR(pinfo->tzd[i]);
+ while (--i >= 0)
+ thermal_zone_device_unregister(pinfo->tzd[i]);
+ configure_adc(0);
+ kfree(pinfo);
+ return ret;
}
/**
*/
static int mid_thermal_remove(struct platform_device *pdev)
{
- int i;
- struct platform_info *pinfo = platform_get_drvdata(pdev);
+ int i;
+ struct platform_info *pinfo = platform_get_drvdata(pdev);
- for (i = 0; i < MSIC_THERMAL_SENSORS; i++)
- thermal_zone_device_unregister(pinfo->tzd[i]);
+ for (i = 0; i < MSIC_THERMAL_SENSORS; i++)
+ thermal_zone_device_unregister(pinfo->tzd[i]);
- platform_set_drvdata(pdev, NULL);
+ platform_set_drvdata(pdev, NULL);
- /* Stop the ADC */
- return configure_adc(0);
+ /* Stop the ADC */
+ return configure_adc(0);
}
-/*********************************************************************
- * Driver initialisation and finalization
- *********************************************************************/
-
#define DRIVER_NAME "msic_sensor"
static const struct platform_device_id therm_id_table[] = {
- { DRIVER_NAME, 1 },
- { }
+ { DRIVER_NAME, 1 },
+ { }
};
static struct platform_driver mid_thermal_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = mid_thermal_probe,
- .suspend = mid_thermal_suspend,
- .resume = mid_thermal_resume,
- .remove = __devexit_p(mid_thermal_remove),
- .id_table = therm_id_table,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = mid_thermal_probe,
+ .suspend = mid_thermal_suspend,
+ .resume = mid_thermal_resume,
+ .remove = __devexit_p(mid_thermal_remove),
+ .id_table = therm_id_table,
};
static int __init mid_thermal_module_init(void)
{
- return platform_driver_register(&mid_thermal_driver);
+ return platform_driver_register(&mid_thermal_driver);
}
static void __exit mid_thermal_module_exit(void)
{
- platform_driver_unregister(&mid_thermal_driver);
+ platform_driver_unregister(&mid_thermal_driver);
}
module_init(mid_thermal_module_init);
projects / platform / kernel / linux-exynos.git / commitdiff