arm64: dts: qcom: msm8916: drop unused board-specific nodes

These nodes reserve and configure some pins as GPIOs. They are not
generic pinctrls, they actually belong to board files but they are not
used by any other node, so just drop them altogether.

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index c67ad8e..98f7404 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -505,32 +505,6 @@
                };
        };
 
-       ext-codec-lines {
-               ext_codec_lines_act: lines_on {
-                       pinmux {
-                               function = "gpio";
-                               pins = "gpio67";
-                       };
-                       pinconf {
-                               pins = "gpio67";
-                               drive-strength = <8>;
-                               bias-disable;
-                               output-high;
-                       };
-               };
-               ext_codec_lines_sus: lines_off {
-                       pinmux {
-                               function = "gpio";
-                               pins = "gpio67";
-                       };
-                       pinconf {
-                               pins = "gpio67";
-                               drive-strength = <2>;
-                               bias-disable;
-                       };
-               };
-       };
-
        cdc-pdm-lines {
                cdc_pdm_lines_act: pdm_lines_on {
                        pinmux {
@@ -695,32 +669,6 @@
                };
        };
 
-       cross-conn-det {
-               cross_conn_det_act: lines_on {
-                       pinmux {
-                               function = "gpio";
-                               pins = "gpio120";
-                       };
-                       pinconf {
-                               pins = "gpio120";
-                               drive-strength = <8>;
-                               output-low;
-                               bias-pull-down;
-                       };
-               };
-               cross_conn_det_sus: lines_off {
-                       pinmux {
-                               function = "gpio";
-                               pins = "gpio120";
-                       };
-                       pinconf {
-                               pins = "gpio120";
-                               drive-strength = <2>;
-                               bias-disable;
-                       };
-               };
-       };
-
        wcnss_pin_a: wcnss-active {
                pinmux {
                        pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";