tg3: Fix phylib locking strategy

Felix Radensky noted that chip resets were generating stack trace dumps.
This is because the driver is attempting to acquire the mdio bus mutex
while holding the tp->lock spinlock.  The fix is to change the code such
that every phy access takes the tp->lock spinlock instead.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f09bc5d..ba5d3fe 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -902,11 +902,12 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg)
        struct tg3 *tp = bp->priv;
        u32 val;
 
-       if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
-               return -EAGAIN;
+       spin_lock_bh(&tp->lock);
 
        if (tg3_readphy(tp, reg, &val))
-               return -EIO;
+               val = -EIO;
+
+       spin_unlock_bh(&tp->lock);
 
        return val;
 }
@@ -914,14 +915,16 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg)
 static int tg3_mdio_write(struct mii_bus *bp, int mii_id, int reg, u16 val)
 {
        struct tg3 *tp = bp->priv;
+       u32 ret = 0;
 
-       if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
-               return -EAGAIN;
+       spin_lock_bh(&tp->lock);
 
        if (tg3_writephy(tp, reg, val))
-               return -EIO;
+               ret = -EIO;
 
-       return 0;
+       spin_unlock_bh(&tp->lock);
+
+       return ret;
 }
 
 static int tg3_mdio_reset(struct mii_bus *bp)
@@ -1011,12 +1014,6 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 
 static void tg3_mdio_start(struct tg3 *tp)
 {
-       if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
-               mutex_lock(&tp->mdio_bus->mdio_lock);
-               tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
-               mutex_unlock(&tp->mdio_bus->mdio_lock);
-       }
-
        tp->mi_mode &= ~MAC_MI_MODE_AUTO_POLL;
        tw32_f(MAC_MI_MODE, tp->mi_mode);
        udelay(80);
@@ -1041,15 +1038,6 @@ static void tg3_mdio_start(struct tg3 *tp)
                tg3_mdio_config_5785(tp);
 }
 
-static void tg3_mdio_stop(struct tg3 *tp)
-{
-       if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
-               mutex_lock(&tp->mdio_bus->mdio_lock);
-               tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_PAUSED;
-               mutex_unlock(&tp->mdio_bus->mdio_lock);
-       }
-}
-
 static int tg3_mdio_init(struct tg3 *tp)
 {
        int i;
@@ -1141,7 +1129,6 @@ static void tg3_mdio_fini(struct tg3 *tp)
                tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_INITED;
                mdiobus_unregister(tp->mdio_bus);
                mdiobus_free(tp->mdio_bus);
-               tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
        }
 }
 
@@ -1363,7 +1350,7 @@ static void tg3_adjust_link(struct net_device *dev)
        struct tg3 *tp = netdev_priv(dev);
        struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR];
 
-       spin_lock(&tp->lock);
+       spin_lock_bh(&tp->lock);
 
        mac_mode = tp->mac_mode & ~(MAC_MODE_PORT_MODE_MASK |
                                    MAC_MODE_HALF_DUPLEX);
@@ -1431,7 +1418,7 @@ static void tg3_adjust_link(struct net_device *dev)
        tp->link_config.active_speed = phydev->speed;
        tp->link_config.active_duplex = phydev->duplex;
 
-       spin_unlock(&tp->lock);
+       spin_unlock_bh(&tp->lock);
 
        if (linkmesg)
                tg3_link_report(tp);
@@ -6392,8 +6379,6 @@ static int tg3_chip_reset(struct tg3 *tp)
 
        tg3_nvram_lock(tp);
 
-       tg3_mdio_stop(tp);
-
        tg3_ape_lock(tp, TG3_APE_LOCK_GRC);
 
        /* No matching tg3_nvram_unlock() after this because
@@ -8698,6 +8683,8 @@ static int tg3_close(struct net_device *dev)
 
        del_timer_sync(&tp->timer);
 
+       tg3_phy_stop(tp);
+
        tg3_full_lock(tp, 1);
 #if 0
        tg3_dump_state(tp);

diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 524691c..bab7940 100644 (file)
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2748,7 +2748,6 @@ struct tg3 {
 #define TG3_FLG3_5701_DMA_BUG          0x00000008
 #define TG3_FLG3_USE_PHYLIB            0x00000010
 #define TG3_FLG3_MDIOBUS_INITED                0x00000020
-#define TG3_FLG3_MDIOBUS_PAUSED                0x00000040
 #define TG3_FLG3_PHY_CONNECTED         0x00000080
 #define TG3_FLG3_RGMII_STD_IBND_DISABLE        0x00000100
 #define TG3_FLG3_RGMII_EXT_IBND_RX_EN  0x00000200