ARM: dts: socfpga: add reset control for USB

Add the resets property for the 2 USB controllers.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index b89cbde..9f48141 100644 (file)
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -831,6 +831,8 @@
                        interrupts = <0 125 4>;
                        clocks = <&usb_mp_clk>;
                        clock-names = "otg";
+                       resets = <&rst USB0_RESET>;
+                       reset-names = "dwc2";
                        phys = <&usbphy0>;
                        phy-names = "usb2-phy";
                        status = "disabled";
@@ -842,6 +844,8 @@
                        interrupts = <0 128 4>;
                        clocks = <&usb_mp_clk>;
                        clock-names = "otg";
+                       resets = <&rst USB1_RESET>;
+                       reset-names = "dwc2";
                        phys = <&usbphy0>;
                        phy-names = "usb2-phy";
                        status = "disabled";

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 4eec2c7..17e81dc 100644 (file)
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -713,6 +713,8 @@
                        interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&usb_clk>;
                        clock-names = "otg";
+                       resets = <&rst USB0_RESET>;
+                       reset-names = "dwc2";
                        phys = <&usbphy0>;
                        phy-names = "usb2-phy";
                        status = "disabled";
@@ -724,6 +726,8 @@
                        interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&usb_clk>;
                        clock-names = "otg";
+                       resets = <&rst USB1_RESET>;
+                       reset-names = "dwc2";
                        phys = <&usbphy0>;
                        phy-names = "usb2-phy";
                        status = "disabled";