mfd: twl-core: Convert to use regmap for I/O
authorPeter Ujfalusi <peter.ujfalusi@ti.com>
Tue, 13 Nov 2012 08:28:44 +0000 (09:28 +0100)
committerSamuel Ortiz <sameo@linux.intel.com>
Wed, 21 Nov 2012 15:07:59 +0000 (16:07 +0100)
Remove the custom code to do I/O and replace it with standard regmap calls.

Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
drivers/mfd/twl-core.c

index 1dfd583..5043f50 100644 (file)
@@ -32,6 +32,7 @@
 #include <linux/mutex.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/device.h>
@@ -171,13 +172,7 @@ EXPORT_SYMBOL(twl_rev);
 /* Structure for each TWL4030/TWL6030 Slave */
 struct twl_client {
        struct i2c_client *client;
-       u8 address;
-
-       /* max numb of i2c_msg required is for read =2 */
-       struct i2c_msg xfer_msg[2];
-
-       /* To lock access to xfer_msg */
-       struct mutex xfer_lock;
+       struct regmap *regmap;
 };
 
 static struct twl_client twl_modules[TWL_NUM_SLAVES];
@@ -225,6 +220,33 @@ static struct twl_mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
        { 3, TWL4030_BASEADD_SECURED_REG },
 };
 
+static struct regmap_config twl4030_regmap_config[4] = {
+       {
+               /* Address 0x48 */
+               .reg_bits = 8,
+               .val_bits = 8,
+               .max_register = 0xff,
+       },
+       {
+               /* Address 0x49 */
+               .reg_bits = 8,
+               .val_bits = 8,
+               .max_register = 0xff,
+       },
+       {
+               /* Address 0x4a */
+               .reg_bits = 8,
+               .val_bits = 8,
+               .max_register = 0xff,
+       },
+       {
+               /* Address 0x4b */
+               .reg_bits = 8,
+               .val_bits = 8,
+               .max_register = 0xff,
+       },
+};
+
 static struct twl_mapping twl6030_map[] = {
        /*
         * NOTE:  don't change this table without updating the
@@ -262,6 +284,27 @@ static struct twl_mapping twl6030_map[] = {
        { SUB_CHIP_ID1, TWL6025_BASEADD_CHARGER },
 };
 
+static struct regmap_config twl6030_regmap_config[3] = {
+       {
+               /* Address 0x48 */
+               .reg_bits = 8,
+               .val_bits = 8,
+               .max_register = 0xff,
+       },
+       {
+               /* Address 0x49 */
+               .reg_bits = 8,
+               .val_bits = 8,
+               .max_register = 0xff,
+       },
+       {
+               /* Address 0x4a */
+               .reg_bits = 8,
+               .val_bits = 8,
+               .max_register = 0xff,
+       },
+};
+
 /*----------------------------------------------------------------------*/
 
 /* Exported Functions */
@@ -283,7 +326,6 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
        int ret;
        int sid;
        struct twl_client *twl;
-       struct i2c_msg *msg;
 
        if (unlikely(mod_no > TWL_MODULE_LAST)) {
                pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
@@ -301,32 +343,14 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
        }
        twl = &twl_modules[sid];
 
-       mutex_lock(&twl->xfer_lock);
-       /*
-        * [MSG1]: fill the register address data
-        * fill the data Tx buffer
-        */
-       msg = &twl->xfer_msg[0];
-       msg->addr = twl->address;
-       msg->len = num_bytes + 1;
-       msg->flags = 0;
-       msg->buf = value;
-       /* over write the first byte of buffer with the register address */
-       *value = twl_map[mod_no].base + reg;
-       ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1);
-       mutex_unlock(&twl->xfer_lock);
-
-       /* i2c_transfer returns number of messages transferred */
-       if (ret != 1) {
-               pr_err("%s: i2c_write failed to transfer all messages\n",
-                       DRIVER_NAME);
-               if (ret < 0)
-                       return ret;
-               else
-                       return -EIO;
-       } else {
-               return 0;
-       }
+       ret = regmap_bulk_write(twl->regmap, twl_map[mod_no].base + reg,
+                               &value[1], num_bytes);
+
+       if (ret)
+               pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n",
+                      DRIVER_NAME, mod_no, reg, num_bytes);
+
+       return ret;
 }
 EXPORT_SYMBOL(twl_i2c_write);
 
@@ -342,10 +366,8 @@ EXPORT_SYMBOL(twl_i2c_write);
 int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
 {
        int ret;
-       u8 val;
        int sid;
        struct twl_client *twl;
-       struct i2c_msg *msg;
 
        if (unlikely(mod_no > TWL_MODULE_LAST)) {
                pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
@@ -363,34 +385,14 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
        }
        twl = &twl_modules[sid];
 
-       mutex_lock(&twl->xfer_lock);
-       /* [MSG1] fill the register address data */
-       msg = &twl->xfer_msg[0];
-       msg->addr = twl->address;
-       msg->len = 1;
-       msg->flags = 0; /* Read the register value */
-       val = twl_map[mod_no].base + reg;
-       msg->buf = &val;
-       /* [MSG2] fill the data rx buffer */
-       msg = &twl->xfer_msg[1];
-       msg->addr = twl->address;
-       msg->flags = I2C_M_RD;  /* Read the register value */
-       msg->len = num_bytes;   /* only n bytes */
-       msg->buf = value;
-       ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 2);
-       mutex_unlock(&twl->xfer_lock);
-
-       /* i2c_transfer returns number of messages transferred */
-       if (ret != 2) {
-               pr_err("%s: i2c_read failed to transfer all messages\n",
-                       DRIVER_NAME);
-               if (ret < 0)
-                       return ret;
-               else
-                       return -EIO;
-       } else {
-               return 0;
-       }
+       ret = regmap_bulk_read(twl->regmap, twl_map[mod_no].base + reg,
+                              value, num_bytes);
+
+       if (ret)
+               pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n",
+                      DRIVER_NAME, mod_no, reg, num_bytes);
+
+       return ret;
 }
 EXPORT_SYMBOL(twl_i2c_read);
 
@@ -1184,6 +1186,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
        struct twl4030_platform_data    *pdata = client->dev.platform_data;
        struct device_node              *node = client->dev.of_node;
        struct platform_device          *pdev;
+       struct regmap_config            *twl_regmap_config;
        int                             irq_base = 0;
        int                             status;
        unsigned                        i, num_slaves;
@@ -1237,22 +1240,23 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
        if ((id->driver_data) & TWL6030_CLASS) {
                twl_id = TWL6030_CLASS_ID;
                twl_map = &twl6030_map[0];
+               twl_regmap_config = twl6030_regmap_config;
                num_slaves = TWL_NUM_SLAVES - 1;
        } else {
                twl_id = TWL4030_CLASS_ID;
                twl_map = &twl4030_map[0];
+               twl_regmap_config = twl4030_regmap_config;
                num_slaves = TWL_NUM_SLAVES;
        }
 
        for (i = 0; i < num_slaves; i++) {
                struct twl_client *twl = &twl_modules[i];
 
-               twl->address = client->addr + i;
                if (i == 0) {
                        twl->client = client;
                } else {
                        twl->client = i2c_new_dummy(client->adapter,
-                                       twl->address);
+                                                   client->addr + i);
                        if (!twl->client) {
                                dev_err(&client->dev,
                                        "can't attach client %d\n", i);
@@ -1260,7 +1264,16 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
                                goto fail;
                        }
                }
-               mutex_init(&twl->xfer_lock);
+
+               twl->regmap = devm_regmap_init_i2c(twl->client,
+                                                  &twl_regmap_config[i]);
+               if (IS_ERR(twl->regmap)) {
+                       status = PTR_ERR(twl->regmap);
+                       dev_err(&client->dev,
+                               "Failed to allocate regmap %d, err: %d\n", i,
+                               status);
+                       goto fail;
+               }
        }
 
        inuse = true;