--- /dev/null
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+#include <asm/gpio.h>
+
+enum stm32_gpio_port {
+ STM32_GPIO_PORT_A = 0,
+ STM32_GPIO_PORT_B,
+ STM32_GPIO_PORT_C,
+ STM32_GPIO_PORT_D,
+ STM32_GPIO_PORT_E,
+ STM32_GPIO_PORT_F,
+ STM32_GPIO_PORT_G,
+ STM32_GPIO_PORT_H,
+ STM32_GPIO_PORT_I
+};
+
+enum stm32_gpio_pin {
+ STM32_GPIO_PIN_0 = 0,
+ STM32_GPIO_PIN_1,
+ STM32_GPIO_PIN_2,
+ STM32_GPIO_PIN_3,
+ STM32_GPIO_PIN_4,
+ STM32_GPIO_PIN_5,
+ STM32_GPIO_PIN_6,
+ STM32_GPIO_PIN_7,
+ STM32_GPIO_PIN_8,
+ STM32_GPIO_PIN_9,
+ STM32_GPIO_PIN_10,
+ STM32_GPIO_PIN_11,
+ STM32_GPIO_PIN_12,
+ STM32_GPIO_PIN_13,
+ STM32_GPIO_PIN_14,
+ STM32_GPIO_PIN_15
+};
+
+enum stm32_gpio_mode {
+ STM32_GPIO_MODE_IN = 0,
+ STM32_GPIO_MODE_OUT,
+ STM32_GPIO_MODE_AF,
+ STM32_GPIO_MODE_AN
+};
+
+enum stm32_gpio_otype {
+ STM32_GPIO_OTYPE_PP = 0,
+ STM32_GPIO_OTYPE_OD
+};
+
+enum stm32_gpio_speed {
+ STM32_GPIO_SPEED_2M = 0,
+ STM32_GPIO_SPEED_25M,
+ STM32_GPIO_SPEED_50M,
+ STM32_GPIO_SPEED_100M
+};
+
+enum stm32_gpio_pupd {
+ STM32_GPIO_PUPD_NO = 0,
+ STM32_GPIO_PUPD_UP,
+ STM32_GPIO_PUPD_DOWN
+};
+
+enum stm32_gpio_af {
+ STM32_GPIO_AF0 = 0,
+ STM32_GPIO_AF1,
+ STM32_GPIO_AF2,
+ STM32_GPIO_AF3,
+ STM32_GPIO_AF4,
+ STM32_GPIO_AF5,
+ STM32_GPIO_AF6,
+ STM32_GPIO_AF7,
+ STM32_GPIO_AF8,
+ STM32_GPIO_AF9,
+ STM32_GPIO_AF10,
+ STM32_GPIO_AF11,
+ STM32_GPIO_AF12,
+ STM32_GPIO_AF13,
+ STM32_GPIO_AF14,
+ STM32_GPIO_AF15
+};
+
+struct stm32_gpio_dsc {
+ enum stm32_gpio_port port;
+ enum stm32_gpio_pin pin;
+};
+
+struct stm32_gpio_ctl {
+ enum stm32_gpio_mode mode;
+ enum stm32_gpio_otype otype;
+ enum stm32_gpio_speed speed;
+ enum stm32_gpio_pupd pupd;
+ enum stm32_gpio_af af;
+};
+
+struct stm32_gpio_regs {
+ u32 moder; /* GPIO port mode */
+ u32 otyper; /* GPIO port output type */
+ u32 ospeedr; /* GPIO port output speed */
+ u32 pupdr; /* GPIO port pull-up/pull-down */
+ u32 idr; /* GPIO port input data */
+ u32 odr; /* GPIO port output data */
+ u32 bsrr; /* GPIO port bit set/reset */
+ u32 lckr; /* GPIO port configuration lock */
+ u32 afr[2]; /* GPIO alternate function */
+};
+
+struct stm32_gpio_priv {
+ struct stm32_gpio_regs *regs;
+};
+
+static inline unsigned stm32_gpio_to_port(unsigned gpio)
+{
+ return gpio / 16;
+}
+
+static inline unsigned stm32_gpio_to_pin(unsigned gpio)
+{
+ return gpio % 16;
+}
+
+#endif /* _STM32_GPIO_H_ */
--- /dev/null
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+/*
+ * This empty files is needed to not break compilation
+ * Some common drivers to STM32F4/F7 and H7 include a stm32.h file
+ * Some cleanup need to be done to communalize all the following
+ * stm32.h files:
+ *
+ * arch/arm/include/asm/arch-stm32f1/stm32.h
+ * arch/arm/include/asm/arch-stm32f4/stm32.h
+ * arch/arm/include/asm/arch-stm32f7/stm32.h
+ */
+#endif /* _ASM_ARCH_HARDWARE_H */
select SPL_SYS_MALLOC_SIMPLE
select SPL_XIP_SUPPORT
+config STM32H7
+ bool "stm32h7 family"
+ select CLK
+ select DM_GPIO
+ select DM_RESET
+ select MISC
+ select PINCTRL
+ select PINCTRL_STM32
+ select RAM
+ select REGMAP
+ select STM32_SDRAM
+ select STM32_RCC
+ select STM32_RESET
+ select STM32X7_SERIAL
+ select SYSCON
+
source "arch/arm/mach-stm32/stm32f4/Kconfig"
source "arch/arm/mach-stm32/stm32f7/Kconfig"
+source "arch/arm/mach-stm32/stm32h7/Kconfig"
endif
obj-$(CONFIG_STM32F4) += stm32f4/
obj-$(CONFIG_STM32F7) += stm32f7/
+obj-$(CONFIG_STM32H7) += stm32h7/
--- /dev/null
+if STM32H7
+
+config TARGET_STM32H743_DISCO
+ bool "STM32H743 Discovery board"
+
+config TARGET_STM32H743_EVAL
+ bool "STM32H743 Evaluation board"
+
+source "board/st/stm32h743-eval/Kconfig"
+source "board/st/stm32h743-disco/Kconfig"
+
+endif
--- /dev/null
+#
+# Copyright (c) 2017
+# Patrice Chotard <patrice.chotard@st.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += soc.o
--- /dev/null
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m_mpu.h>
+
+u32 get_cpu_rev(void)
+{
+ return 0;
+}
+
+int arch_cpu_init(void)
+{
+ int i;
+
+ struct mpu_region_config stm32_region_config[] = {
+ /*
+ * Make all 4GB cacheable & executable. We are overriding it
+ * with next region for any requirement. e.g. below region1,
+ * 2 etc.
+ * In other words, the area not coming in following
+ * regions configuration is the one configured here in region_0
+ * (cacheable & executable).
+ */
+ { 0x00000000, REGION_0, XN_DIS, PRIV_RW_USR_RW,
+ O_I_WB_RD_WR_ALLOC, REGION_4GB },
+
+ /* Code area, executable & strongly ordered */
+ { 0xD0000000, REGION_1, XN_EN, PRIV_RW_USR_RW,
+ STRONG_ORDER, REGION_8MB },
+
+ /* Device area in all H7 : Not executable */
+ { 0x40000000, REGION_2, XN_EN, PRIV_RW_USR_RW,
+ DEVICE_NON_SHARED, REGION_512MB },
+
+ /*
+ * Armv7m fixed configuration: strongly ordered & not
+ * executable, not cacheable
+ */
+ { 0xE0000000, REGION_4, XN_EN, PRIV_RW_USR_RW,
+ STRONG_ORDER, REGION_512MB },
+ };
+
+ disable_mpu();
+ for (i = 0; i < ARRAY_SIZE(stm32_region_config); i++)
+ mpu_config(&stm32_region_config[i]);
+ enable_mpu();
+
+ return 0;
+}
+
+void s_init(void)
+{
+}
--- /dev/null
+if TARGET_STM32H743_DISCO
+
+config SYS_BOARD
+ string
+ default "stm32h743-disco"
+
+config SYS_VENDOR
+ string
+ default "st"
+
+config SYS_SOC
+ string
+ default "stm32h7"
+
+config SYS_CONFIG_NAME
+ string
+ default "stm32h743-disco"
+
+endif
--- /dev/null
+STM32H743 DISCOVERY BOARD
+M: Patrice Chotard <patrice.chotard@st.com>
+S: Maintained
+F: board/st/stm32h743-disco
+F: include/configs/stm32h743-disco.h
+F: configs/stm32h743-disco_defconfig
+F: arch/arm/dts/stm32h7*
--- /dev/null
+#
+# Copyright (C) STMicroelectronics SA 2017
+# Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.#
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := stm32h743-disco.o
--- /dev/null
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ return ret;
+ }
+
+ if (fdtdec_setup_memory_size() != 0)
+ ret = -EINVAL;
+
+ return ret;
+}
+
+int dram_init_banksize(void)
+{
+ fdtdec_setup_memory_banksize();
+
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+u32 get_board_rev(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
+ return 0;
+}
--- /dev/null
+if TARGET_STM32H743_EVAL
+
+config SYS_BOARD
+ string
+ default "stm32h743-eval"
+
+config SYS_VENDOR
+ string
+ default "st"
+
+config SYS_SOC
+ string
+ default "stm32h7"
+
+config SYS_CONFIG_NAME
+ string
+ default "stm32h743-eval"
+
+endif
--- /dev/null
+STM32H743 EVALUATION BOARD
+M: Patrice Chotard <patrice.chotard@st.com>
+S: Maintained
+F: board/st/stm32h743-eval
+F: include/configs/stm32h743-eval.h
+F: configs/stm32h743-eval_defconfig
--- /dev/null
+#
+# (C) Copyright 2017
+# Patrice Chotard, <patrice.chotard@st.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := stm32h743-eval.o
--- /dev/null
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ return ret;
+ }
+
+ if (fdtdec_setup_memory_size() != 0)
+ ret = -EINVAL;
+
+ return ret;
+}
+
+int dram_init_banksize(void)
+{
+ fdtdec_setup_memory_banksize();
+
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+u32 get_board_rev(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
+ return 0;
+}
--- /dev/null
+CONFIG_ARM=y
+CONFIG_STM32=y
+CONFIG_SYS_MALLOC_F_LEN=0xF00
+CONFIG_STM32H7=y
+CONFIG_TARGET_STM32H743_DISCO=y
+CONFIG_DEFAULT_DEVICE_TREE="stm32h743i-disco"
+CONFIG_BOOTDELAY=3
+CONFIG_DEFAULT_FDT_FILE="stm32h743i-disco"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot > "
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
+CONFIG_AUTOBOOT_STOP_STR=" "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_TIMER=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+# CONFIG_PINCTRL_FULL is not set
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_REGEX=y
+CONFIG_LIB_RAND=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+# CONFIG_EFI_LOADER is not set
--- /dev/null
+CONFIG_ARM=y
+CONFIG_STM32=y
+CONFIG_SYS_MALLOC_F_LEN=0xF00
+CONFIG_STM32H7=y
+CONFIG_TARGET_STM32H743_EVAL=y
+CONFIG_DEFAULT_DEVICE_TREE="stm32h743i-eval"
+CONFIG_BOOTDELAY=3
+CONFIG_DEFAULT_FDT_FILE="stm32h743i-eval"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot > "
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
+CONFIG_AUTOBOOT_STOP_STR=" "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_TIMER=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+# CONFIG_PINCTRL_FULL is not set
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_REGEX=y
+CONFIG_LIB_RAND=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+# CONFIG_EFI_LOADER is not set
--- /dev/null
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <config.h>
+
+#define CONFIG_SYS_FLASH_BASE 0x08000000
+#define CONFIG_SYS_INIT_SP_ADDR 0x30020000
+#define CONFIG_SYS_TEXT_BASE 0x08000000
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_RAM_BASE 0xD0000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
+#define CONFIG_SYS_LOAD_ADDR 0xD0400000
+#define CONFIG_LOADADDR 0xD0400000
+
+#define CONFIG_ENV_SIZE (8 << 10)
+
+#define CONFIG_SYS_ARCH_TIMER
+#define CONFIG_SYS_HZ_CLOCK 250000000
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_CACHE
+#define CONFIG_BOARD_LATE_INIT
+
+#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <config.h>
+
+#define CONFIG_SYS_FLASH_BASE 0x08000000
+#define CONFIG_SYS_INIT_SP_ADDR 0x30020000
+#define CONFIG_SYS_TEXT_BASE 0x08000000
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_RAM_BASE 0xD0000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
+#define CONFIG_SYS_LOAD_ADDR 0xD0400000
+#define CONFIG_LOADADDR 0xD0400000
+
+#define CONFIG_ENV_SIZE (8 << 10)
+
+#define CONFIG_SYS_ARCH_TIMER
+#define CONFIG_SYS_HZ_CLOCK 250000000
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_CACHE
+#define CONFIG_BOARD_LATE_INIT
+
+#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / commitdiff